Philips BTD5210/12 User manual

Brand: Philips

Model: BTD5210/12

Category: Home audio sets

Type: User manual

Philips BTD5210/12 offers versatile entertainment options for your home. Watch DVD/VCD/SVCD discs on your TV, or enjoy videos, photos, and music from USB storage devices. Connect via Bluetooth to stream music wirelessly from your phone or tablet. Experience karaoke fun by plugging a microphone into the dedicated input, or listen to FM radio stations. Enhance your audio output with various sound effects, including Balanced, Clear, Powerful, Warm, and Bright.

www.philips.com/support

BTD5210

User manual

Always there to help you

Question?

Contact

Philips

1EN

Contents

1 Important 2

Safety 2

2 Your micro system 3

Introduction 3

What's in the box 3

Overview of the main unit 4

Overview of the remote control 5

3 Connect 7

Place the unit 7

Connect speakers 7

Connect FM antenna 7

Connect video/audio cables 8

Connect an external audio device 8

Connect power 9

4 Get started 10

Prepare the remote control 10

Set clock 10

Activate demonstration mode 10

Turn on 11

Find the correct viewing channel 11

Select the correct TV system 11

Change system menu language 11

5 Play 12

Play from disc 12

Play from USB or recored discs 13

Play a slideshow with background music 13

Resume video play from last stopped

point 13

Control play 14

Play options 14

Change the audio channel 14

6 Enjoy karaoke 15

Adjust Karaoke settings 15

7 Listen to the radio 16

Tune to a radio station 16

Program radio stations automatically 16

Program radio stations manually 16

Select a preset radio station 16

8 Play from Bluetooth-enabled

devices 17

9 Other features 18

Set the alarm timer 18

Set the sleep timer 18

Listen to an external device 18

10 Adjust settings 19

General setup 19

Video setup 19

Audio setup 20

Preferences 20

11 Product information 22

Specications 22

Supported disc formats 23

USB playability information 23

12 Troubleshooting 24

13 Notice 26

Declaration of conformity 26

2 EN

1 Important

Safety

• Make sure that there is enough free space

around the product for ventilation.

• Only use attachments or accessories

speciedbythemanufacturer.

• Battery usage CAUTION – To prevent

battery leakage which may result in bodily

injury, property damage, or damage to the

product:

• Install the battery correctly, + and - as

marked on the product.

• Remove the battery when the product

is not used for a long time.

• The battery shall not be exposed to

excessiveheatsuchassunshine,reor

the like.

• The product shall not be exposed to

dripping or splashing.

• Do not place any sources of danger on the

product(e.g.liquidlledobjects,lighted

candles).

• Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

Warning

• Never remove the casing of this device.

• Never lubricate any part of this device.

• Never place this device on other electrical equipment.

• Keep this device away from direct sunlight, naked

amesorheat.

• Never look into the laser beam inside this device.

• Ensure that you always have easy access to the power

cord, plug, or adaptor to disconnect this device from

the power.

3EN

2 Your micro

system

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this unit, you can:

• Watch video from DVD/VCD/SVCD, or

USB storage devices;

• enjoy audio from discs, Bluetooth-enabled

devices, USB storage devices, or other

external devices;

• enjoy Karaoke by connecting a microphone.

• view pictures from discs or USB storage

devices;

• listen to FM radio stations.

You can enrich sound output with below

sound effect:

• Digital Sound Control (DSC)

• DSC 1: Balanced

• DSC 2: Clear

• DSC 3: Powerful

• DSC 4: Warm

• DSC 5: Bright

The unit supports these media formats:

DVD region code Countries

Europe

What's in the box

Check and identify the contents of your

package:

• Main unit

• 2 x speakers

• 1 x power cord

• 1 x composite video cable (yellow)

• 1 x FM antenna

• Remote control (with two AAA batteries)

• Short User Manual

• Safety&Notice Sheet

4 EN

Overview of the main unit

• Turn the unit on or off.

• Switch to standby mode or Eco

standby mode.

b Display panel

• Show the current status.

• Socket for a USB storage device.

d /PAIRING

• Start, pause, or resume play.

• In the Bluetooth source, press and hold

to enter pairing mode.

e MIC IN

• Connect a microphone.

f Disc compartment

• Stop play.

• Erase a programed radio station.

• Activate/deactivate demonstration

mode.

MIC IN

h /

• Skip to the previous/next track, title or

chapter.

• (Press and hold) Fast backward/

forward within a track/disc/USB.

• Tune to a radio station.

• (Press and hold) search for radio

stations automatically.

• Open/close the disc compartment.

j SRC

• Select a source: DISC, USB, FM, AUX

IN, BT.

k VOLUME

• Adjust volume.

• Adjust time during alarm/sleep timer

setting.

5EN

Overview of the remote

control

a /STANDBY

• Turn the unit on or off.

• Switch to standby mode or Eco

standby mode.

• Access the system menu.

c DISPLAY

• View playback information.

d / ( / )

• Navigate through the menu.

• Search within a track/disc/USB.

• Tune to a radio station.

e SUBTITLE/PRESET + ( ) /

AUDIO/PRESET -( )

• Navigate through the menu.

• Skip to the previous/next album.

• SUBTITLE ( ): Select a preset radio

station.

• AUDIO ( ): Set the subtitle language.

• Set time.

STANDBYEJECT

• Return to the previous display menu.

g +/-

• Adjust volume.

h /

• Skip to the previous or next title,

chapter,track,orle.

i Numeric buttons

• Select a title/chapter/track to play.

• Select a preset number.

j MENU

• Access DISC/USB/iPod/iPhone/iPad

menu.

k OPTION

• In DISC/USB play mode, press to

select preferred play options.

l PROG/CLOCK SET

• Program radio stations.

• Set the clock.

• View clock information.

m TIME/SLEEP

• Set the alarm timer.

• Set the sleep timer.

n RDS

• For selected FM radio stations, display

information of Radio Data System

(RDS).

o /PAIRING

• Start, pause, or resume play.

• In the Bluetooth source, press and hold

to enter pairing mode.

• Stop play.

• Mute or restore volume.

r SOUND

• Enrich sound effect with Digital Sound

Control (DSC).

s OK

• Conrmaselection.

6 EN

t SOURCE

• Select a source: dock, BT (Bluetooth),

DISC, USB, FM, AUX.

u EJECT

• Press to open or close the disc

compartment.

7EN

3 Connect

Place the unit

1 Place the unit near the TV.

2 Place the left and right speakers at equal

distance from the TV and at an angle

of approximately 45 degrees from the

listening position.

Note

• To avoid magnetic interference or unwanted noise,

never place this apparatus and speakers too close to

any radiation devices.

• Place this unit on top of a table.

• Never place this unit in an enclosed cabinet.

• Install this unit near the AC outlet where the AC power

plug can be easily reached.

Connect speakers

Note

• For optimal sound, use the supplied speakers only.

• Connect only speakers with impedance that is the

same or higher than the supplied speakers. Refer to the

Specicationssectionofthismanual.

1 Holddownthesocketap.

2 Insert the stripped part of the wire

completely.

• Insert the right speaker wires to "R",

left speaker wires to "L".

• Insert the red wires to "+", black wires

to "-".

3 Releasethesocketap.

Connect FM antenna

Tip

• For optimal reception, fully extend and adjust the

position of the antenna.

• For better FM stereo reception, connect an outdoor

FM antenna to the FM AERIAL socket.

• The device does not support MW radio reception.

• Connect the supplied FM antenna to the

FM AERIAL socket on the back of the

device.

VIDEO OUT

VIDEO

DIGITAL OUT

AERIAL

SUBWOOFER

OUT

AUX IN

AC IN

SPEAKER OUT

8 EN

Connect video/audio cables

Select the best video connection that the TV

can support.

• Option 1: Connect to the HDMI socket

(for an HDMI, DVI or HDCP-compliant

TV).

• Option 2: Connect to the composite

video socket (for a standard TV).

Option 1: Connect to the HDMI

socket

• Connect an HDMI cable (not supplied) to:

• the HDMI (DIGITAL OUT) socket on

this unit.

• the HDMI input socket on the TV.

Tip

• If the TV has a DVI connector only, connect via an

HDMI/DVI adaptor. Connect an audio cable for sound

output.

• If this unit connects to a TV compatible with 1080p

or 1080p/24Hz, Philips recommends HDMI category

2 cable, also known as High Speed HDMI cable, for

optimal video and audio output.

• This type of connection provides the best picture

quality.

Option 2: Connect to the composite

video socket

• Connect a composite video cable to:

• the VIDEO (VIDEO OUT) jack on

this unit.

• the VIDEO input socket on the TV.

Tip

• The video input jack on the TV might be labeled as A/V

IN, VIDEO IN, COMPOSITE or BASEBAND.

Connect an external audio

device

You can route audio from an external audio

device to this unit.

If the external audio device has analog audio

output sockets (such as your TV):

• Connect audio cables (red/white - not

supplied) to:

• the AUDIO-IN(L and R) sockets on

the back of the unit.

• the audio output sockets on the

external audio device.

9EN

If the external audio device has a 3.5mm audio

output socket:

• Connect a red/white-to-3.5mm audio

cable (not supplied) to:

• the AUDIO-IN (L and R) sockets on

the back of the unit.

• the headphone socket on the external

audio player.

Connect power

Caution

• Risk of product damage! Ensure that the power supply

voltage corresponds to the voltage printed on the back

or the underside of the unit.

• Risk of electric shock! When you unplug the AC power

cord, always pull the plug from the socket. Never pull

the cord.

• Before you connect the AC power cord, make sure that

you have completed all other connections.

• Connect the AC power cord to

• the AC IN ~ socket on this unit.

• the wall power socket.

VIDEO OUT

VIDEO

DIGITAL OUT

AERIAL

SUBWOOFER

OUT

AUX IN

AC IN

SPEAKER OUT

10 EN

4 Get started

Caution

• Use of controls or adjustments or performance of

procedures other than herein may result in hazardous

laser exposure or other unsafe operation.

Always follow the instructions in this chapter in

sequence.

If you contact Philips, you will be asked for the

model and serial number of this apparatus. The

model number and serial number are on the

back of the apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Prepare the remote control

Caution

• Risk of explosion! Keep batteries away from heat,

sunshineorre.Neverdiscardbatteriesinre.

• Risk of decreased battery life! Never mix different

brands or types of batteries.

• Risk of product damage! When the remote control is

not used for long periods, remove the batteries.

To insert the remote control battery:

1 Open the battery compartment.

2 Insert the supplied AAA batteries with

correct polarity (+/-) as indicated.

3 Close the battery compartment.

Set clock

1 In standby mode, press and hold PROG/

CLOCK SET on the remote control for

more than two seconds.

» [24H] or [12H] hour format is

displayed.

2 Press / (or VOL -/VOL +) to select

[24H] or [12H] hour format, and then

press PROG/CLOCK SET.

» The hour digits are displayed and begin

to blink.

3 Press / (or VOL -/VOL +) to set hour,

and then press PROG/CLOCK SET.

» The minute digits are displayed and

begin to blink.

4 Repeat step 3 to set minute.

Note

• If no button is pressed in 90 seconds, the system exits

clock setting mode automatically.

Tip

• In Eco power mode, you can press PROG/CLOCK

SET to view the clock information.

Activate demonstration mode

In this mode, you can see an overview of all

features.

• In standby mode, press and hold on the

main unit to activate demonstration mode.

» A demonstration of major available

features starts.

To deactivate the demonstration mode:

• Press on the main unit again.

11EN

Turn on

• Press .

» The device switches to the last

selected source.

Switch to standby mode

• Press again to switch the unit to standby

mode.

» The clock (if set) is displayed on the

panel.

To switch to ECO standby mode:

• Press and hold for more than two

seconds.

» The display panel is dimmed.

Note

• The unit switches to Eco Power Standby mode after 15

minutes in standby mode.

To switch between standby mode and ECO

standby mode:

• Press and hold for more than two

seconds.

Find the correct viewing

channel

1 Press DISC to switch to disc mode.

2 Turn on the TV and switch to the correct

video-in channel in one of the following

ways:

• Go to the lowest channel on your TV,

and then press the Channel Down

button until you see the blue screen.

• Press the source button repeatedly on

the remote control of your TV.

Tip

• The video-in channel is between the lowest and highest

channels and may be called FRONT, A/V IN, VIDEO etc.

See the TV user manual on how to select the correct

input on the TV.

Select the correct TV system

Change this setting if the video is not displayed

correctly. By default, this setting matches the

most common setting for TVs in your country.

1 Press .

2 Select [Setup] (Setup) -> [Video] (Video)

-> [TV System](TV System).

3 Select a setting and press OK.

• [PAL] (PAL) - For TV with PAL color

system.

• [Multi] (Multi) - For TV that is

compatible with both PAL and NTSC.

• [NTSC] (NTSC) - For TV with NTSC

color system.

4 To return to the previous menu, press .

5 To exit the menu, press .

Change system menu

language

1 Press .

2 Select [Setup] (Setup) -> [General]

(General) -> [OSD Language] (OSD

Language), and press OK.

3 Select a setting and then press OK.

4 To exit the menu, press .

12 EN

5 Play

Play from disc

Caution

• Risk of product damage! Never play discs with

accessories such as disc stabilizer rings or disc

treatment sheets.

• Never put any objects other than discs into the disc

compartment.

1 Press SOURCE repeatedly to select the

disc source.

2 Press to open the disc compartment.

3 Insert a disc with the printed side facing

upward.

4 Press to close the disc compartment.

» Play starts automatically.

If play does not start automatically:

• Select a title/chapter/track and then press

Tip

• To play a locked DVD, enter the 6-digit parental control

password (000000).

STANDBYEJECT

Use the disc menu

When you load a DVD/(S)VCD disc, a menu

may be displayed on the TV screen.

• Press MENU to access or exit disc menu

manually.

For VCD with PlayBack Control (PBC) feature

(version 2.0 only):

With the PBC feature, you can play VCD

interactively according to the menu screen.

• During play, press MENU to enable/disable

PBC.

» When PBC is enabled, the menu

screen is displayed.

» When PBC is disabled, normal play is

resumed.

Select an audio language

• During disc play, press AUDIO ( )

repeatedly to select an audio language for

a DVD or DivX (Home Theater 3.1) video.

» The language options are displayed.

If the selected audio channel is

unavailable, the default disc audio

channel is used.

Note

• For some DVDs, the language can only be changed

from the disc menu. Press MENU to access the menu.

Select a subtitle language

• During play, press SUBTITLE ( )

repeatedly to select a subtitle language for

a DVD or DivX (Home Theater 3.1) video.

Note

• For some DVDs, the language can only be changed

from the disc menu. Press MENU to access the disc

menu.

13EN

Play from USB or recored

discs

You can play DivX (Home Theater 3.1)/MP3/

JPEGpicturelescopiedontoaCD-R/RW,

recordable DVD, or USB storage device.

1 Select a source.

• Press SOURCE repeatedly to select

the USB source or Disc source.

2 Insert the USB storage device.

» Play starts automatically.

To play a specied le:

1 Press to stop play.

2 Press / to select a folder, and then

press OKtoconrm.

• To return to the previous menu, press

3 Press / toselectalefromthefolder.

4 Press to start play.

Note

• You can only play DivX (Home Theater 3.1) videos

rented or purchased through the DivX registration

code of this unit.

• Subtitleleswiththefollowinglenameextensions(.srt,

.smi, .sub, .ssa, .ass) are supported but do not appear on

thelenavigationmenu.

• Thesubtitlelenamehastobethesameasthele

name of the video.

STANDBYEJECT

Play a slideshow with

background music

ThisunitcanplayMP3lesandJPEGphotos

simultaneously.

Note

• TheMP3andJPEGlesmustbestoredonthesame

disc or USB storage device.

1 PlayanMP3le.

2 Navigate to the photo folder/album and

press to start the slideshow.

» Slideshow begins and continues till the

end of the photo folder or album.

» Music play continues till the end of the

lastle.

• To return to the previous menu, press .

• To stop the slideshow, press .

Resume video play from last

stopped point

Note

• This feature is only available for CD/DVD/VCD/DivX

play.

• In stop mode and when the disc has not

been removed, press .

To stop play completely:

• In stop mode, press .

14 EN

Control play

/ Select a folder.

/ ( / ) Fast backward/forward.

/ Skip to previous or next

title/chapter/track/le.

Pause or resume play.

Stop play.

+/- Increase or decrease the

volume.

(mute) Mute or restore sound.

SOUND Enrich sound effect with

DSC: balanced, clear,

powerful, warm, and bright.

DISPLAY View playback information.

Play options

During video play in DISC mode, press

OPTIONS to select different play options.

• [PBC] (PBC): turn PlayBack Control on/off.

• [Aspect Ratio](Aspect ratio): select a

picturedisplayformattottheTVscreen.

• [Angle] (Angle): switch between camera

angles.

Note

• Some DVDs contain alternate scenes, such as scenes

recorded from different camera angles. For such DVDs,

you can select from the available alternate scenes.

• [Microphone] (Microphone): turn on or

off the microphone sound output.

• [Karaoke Setup] (karaoke Setup): set

different volumes of karaoke disc.

• [Vocal] (Vocal): select various Karaoke

audio modes, or turn off original vocal.

• [Zoom] (Zoom): during video play, zoom

in/out to pan through the image.

• [Repeat] (Repeat): choose a repeat play

option or turn off the repeat function.

• [Goto] (Goto): during video play, specify

a position to start play by entering the

desired time or number.

• [Slow forward] (Slow forward) and [Slow

Backward] (Slow Backward): during video

play, select a slow forward/backward speed.

Change the audio channel

Note

• This feature is only available for VCDs and DivX (Home

Theater 3.1) videos.

• During play, press AUDIO ( ) repeatedly

to select an audio channel available on the

disc:

• [Mono Left] (mono left)

• [Mono Right] (mono right)

• [Mix-Mono] (mix-mono)

• [Stereo] (stereo)

15EN

6 Enjoy karaoke

You can connect a microphone (not supplied)

to sing along with a music source.

Note

• Before you connect a microphone, set the microphone

volume to the minimum to prevent howling.

1 Insert a Karaoke disc.

2 Connect a microphone to the MIC IN

socket on this unit.

3 Press , and then select [Karaoke]

(Karaoke).

4 Turn on the microphone sound output.

5 Play a Karaoke disc and sing through the

microphone.

Adjust Karaoke settings

• [Microphone] (Microphone): turn on or

off the microphone sound output.

• [Mic Volume] (Mic Volume): adjust the

microphone volume.

• [Echo Level] (Echo Level): adjust the echo

level.

• [Karaoke Scoring] (Karaoke Scoring): turn

off the function of Karaoke scoring or

selectadifcultyleveltoscoreyoursinging.

If a level is selected, the score is displayed

after each song ends.

• [Karaoke Idol] (Karaoke Idol): Have a

Karaoke contest with your friends. Enable

this feature, and then follow the on-screen

instructions to start the contest.

1) In the [Karaoke Scoring] (Karaoke Scoring)

option, select a level (basic/intermediate/

advance).

2) In the [Karaoke Idol] (Karaoke Idol) option,

turn on the contest.

» The song selection menu is displayed.

3) Input a track (VCD/SVCD) or a title/

chapter(DVD)astherstsong.Upto4songs

can be selected.

4) Then select [Start] (Start), and press OK to

start play selected songs.

» After all the selected songs end, a con-

test result is displayed.

• [Key Shift] (Key Shift): adjust the pitch level

that matches your voice.

• [Vocal] (Vocal): select various Karaoke

audio modes, or turn off the original vocal.

16 EN

7 Listen to the

radio

Tune to a radio station

Tip

• Position the antenna as far as possible from TV, or other

radiation sources.

• For optimal reception, fully extend and adjust the

position of the antenna.

1 Press SOURCE repeatedly to select the

FM source.

2 Press and hold / ( / ) for more

than two seconds.

» The radio tunes to a station with

strong reception automatically.

3 Repeat step 2 to tune to more stations.

To tune to a weak station:

• Press / ( / ) repeatedly until

youndtheoptimalreception.

Program radio stations

automatically

Note

• You can program a maximum of 30 preset radio

stations (FM).

• In tuner mode, press and hold PROG/

CLOCK SET for more than two seconds

to activate automatic programming.

» [AUTO] (auto) is displayed.

» All available stations are programmed

in the order of waveband reception

strength,andtherstprogrammed

radio station is broadcast automatically.

Program radio stations

manually

1 Tune to a radio station.

2 Press PROG, and then press / to

select a number from 1–30.

3 Press PROGtoconrm.

4 Repeat steps 2-3 to program more

stations.

Note

• To overwrite a programmed station, store another

station in its place.

Select a preset radio station

• In tuner mode, press / (or press a

number directly) to select a preset radio

station.

17EN

8 Play from

Bluetooth-

enabled devices

Note

• The effective operation range between the unit and

your Bluetooth enabled device is approximately 10

meters (30 feet).

• Any obstacle between the system and the device can

reduce the operational range.

• Compatibility with all Bluetooth devices is not guaranteed.

1 Press SOURCE repeatedly to select the

Bluetooth source.

» [BT] (Bluetooth) is displayed.

» The indicatorashesbluequickly.





0000



2 On your device that supports Advanced

AudioDistributionProle(A2DP),enable

Bluetooth and search for Bluetooth devices

that can be paired (refer to the user

manual of the device).

3 Select 'Philips BTD5210' on your

Bluetooth enabled device and if necessary

input '0000' as the pairing password.

» After successful pairing and connection,

the Bluetooth indicator turns solid

blue, and the unit beeps twice.

4 Play audio on the connected device.

» Audio streams from your Bluetooth

enabled device to this unit.

• If you fail to search for "Philips

BTD5210' or cannot pair with this

product, press and hold /PAIRING

for three seconds until the Bluetooth

indicatorashesbluequicklytoenter

pairing mode.

Tip

• The unit can memorize up to 8 previously connected

Bluetooth devices.

To disconnect the Bluetooth-enabled device:

• Deactivate Bluetooth on your device; or

• Move the device beyond the

communication range.

To clear Bluetooth pairing history:

• Pressand hold on the main set for 8

seconds.

» The current Bluetooth connection is

disconnected.

» After successful clearing, the unit beeps.

18 EN

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can

select DISC, FM, or USB as the alarm source.

Note

• Make sure that you have set the clock correctly.

1 In standby mode, press and hold TIME/

SLEEP for more than two seconds.

» "The hour digits are displayed and

begin to blink.

2 Press / (or+/-/) repeatedly to set the

hour, and then press TIME/SLEEP .

» The minute digits are displayed and

begin to blink.

3 Repeat step 2 to select the source, and

adjust volume.

Note

• If no button is pressed in 90 seconds, the unit exits

timer setting mode automatically.

To activate or deactivate the alarm timer:

• In standby mode, press TIME/SLEEP

repeatedly to activate or deactivate the

alarm.

» If the timer is activated, is displayed.

Tip

• If the disc/USB source is selected, but no disc is placed

or no USB connected, the unit switches to the tuner

source automatically.

Set the sleep timer

• To set the sleep timer, when the unit is

switched on, press TIME/SLEEP repeatedly

to select a set period of time (in minutes).

» When the sleep timer is activated,

is displayed.

To deactivate sleep timer:

• When the unit is switched on, press TIME/

SLEEP repeatedly until [SLP OFF] (sleep

off) is displayed.

» When the sleep timer is deactivated,

disappears.

Listen to an external device

You can listen to an external device through this

unit with an 3.5mm audio cable (not supplied).

1 Make sure that the external audio device is

connected to this unit.

2 Press AUX to select the AUX IN source.

3 Start to play the external device (see the

user manual of the external device).

Page is loading ...

Philips BTD5210/12 User manual

Brand: Philips

Model: BTD5210/12

Category: Home audio sets

Type: User manual

Download PDF

report

Philips BTD5210/12 User manual

Philips BTD5210/12 User manual

Related papers

Other documents