2. Health & beauty
  3. Precision trimmers
  4. Protocol
  5. 3669-6 Nose-Ear-Hair Trimmer

Protocol 3669-6 Nose-Ear-Hair Trimmer User manual

  • Hello! I've reviewed the user manual for the PROTOCOL Nose&Ear Hair Trimmer. This device is designed to safely trim nose, ear and eyebrow hair with a rotating micro-cut stainless steel cutting system. I'm ready to answer any questions you may have about its operation, features, and safety precautions outlined in this document.
  • What type of battery does this trimmer use?
    How far should I insert the trimmer into my nostril?
    How far should I insert the trimmer into my ear?
    Is it safe for children to use this trimmer?
Instruction Manual for
Nose&Ear Hair Trimmer
Precision trimmer with professional, rotating micro-cut stainless
steel cutting system grasps hair and cuts faster, simpler, and
safer than scissors.
Safety Information:
• The nasal and ear hair trimmer is only intended for cutting hair.
• Not suitable for children.
• Keep out of reach of children.
• Do not leave equipment unattended when switched on.
• Switch equipment off after use and replace blade guard cap on the cutting head.
• If the equipment is not used for long periods of time, remove batteries.
• The equipment meets the requirements of the EU guideline on Electromagnetic
Compatibility (EMC) 89/336/EEC.
Getting Started:
Only use leak-proof batteries. We recommend the use of an alkaline battery, type ‘AA’
LR6 1.5 V.
1. Turn the battery case cover counter clockwise and remove it (Fig. I.)
2. Insert the battery with the positive (+) terminal in the direction of the cutting
head (Fig. II).
3. Replace the battery case cover and turn it clockwise until it locks (Fig. Ll).
4. Switch the trimmer on using the On switch (Fig. III).
Important!
Do not dispose of used batteries with household
rubbish. Dispose of used batteries in an environmentally
friendly manner!
Trimming Nasal Hair (A):
Switch the trimmer on and carefully insert them into the nostril,
but no further than 1/2 cm. Remove nasal hairs with smooth
circular movements of the trimmer.
Trimming Ear Hair (B):
Do not insert the trimmer further than 1/2 cm into the ear
as this could cause damage to the eardrum!
Switch the trimmer on and carefully insert into the outer ear.
Carefully run the trimmer along the parts of the ear with hairs.
Trimming Eyebrows (C):
Switch the trimmer on and run it slowly over the hairs to
be trimmed. The distance between the cutting head and the
skin when trimming determines the length of remaining hair.
Trimmer Parts
1. Blade guard cap
2. High-grade steel cutting system
3. Cutting head
4.On switch (I).
5. Off switch (0)
6. Battery case cover
1
2
3
4
5
6
I II III
A
B
C
/