ROOMS TO GO 90232364, 90232376 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the ADESSO Malcolm Floor Lamp models 3237-01 and 3237-22. This document provides step-by-step instructions for assembling the lamp, along with important safety information regarding the polarized plug and bulb usage. I am ready to answer any questions you have about the assembly or safe operation of your floor lamp.
  • What type of bulb should I use?
    What do I need to do if the plug does not fit in the outlet?
    Is this product suitable for wet locations?
ASSEMBLY INSTRUCTIONS FOR
Malcolm Floor Lamp
Model # 3237-01
# 3237-22
1.03237-01
3237-22
Remove all parts and lay on a flat surface.
1.Screw pole(B) clockwise into pole(A) to tighten.
2.Screw pole(C) clockwise into pole(B) to tighten.
3.Screw pole(D) clockwise into pole(C) to tighten.
4.
Screw pole (D) clockwise into base (E) to tighten.
Then get the remaining slack of the power cord
out carefully from point(F) .
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE:
(1) 2pcs 60Watt incandescent or 13
Watt CFL equivalent bulb(not included)
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
Assembly Instructions (English)
353 West 39th Street, 2nd Floor, New York, NY 10018
/