3.OVERVIEW (94206-IC) 4.Installation diagram
AHD Call panel have to work with AHD monitor , with wrong signal there is no image display on the monitor.
NOTE:
Button for 13.56MHz RFID keyfobs
Note: Must reboot the system for the
monitor switch to new video mode
720P1080P CVBS
For 1080P doorbell:
During the monitor mode press this
button for 5 seconds to switch
between the different modes
of videos available:
Exit button
Black (GND)
Blue(COM)
Blue(COM)
Green(NC)
Brown (NO)
Electric lock
Magnetic lock
Orange
Exit button unlock time(2s-10s)
Speaker volume adjustment
1.Red (VCC)
2.White (Audio)
3.Black (GND)
4.Yellow (Video)
12V DC
12V DC
Camera
Definition(Hor.)
LEDs for night
Power consumption
Power supplier
Operation temp.
CMOS
1000TVL ; AHD720P/960P/1080P
IR LEDs(120°)
200mA max.(9V-15V DC)
Supplied from indoor unit
-40-+50°C
Installation Surface mount
Capacity 200PCS RFID Keyfobs
Outdoor installation
Do not install the call panel in this environment
e.g. Straight sunshine , contact rain , high
temperature , high humidity , full of dust
and chemistry corrosive.
Switch off power supply before installation.
Keep more than 30cm away from AC power
supply to avoid external interference.
NOTE:
03 04
whatsapp:+8615913473606 Veb:www.anjielo.com