2. Home
  3. Do-It-Yourself tools
  4. Power tools
  5. Power sanders
  6. Grizzly
  7. H8192

Grizzly H8192 Owner's manual

  • Hello! I have reviewed the datasheet for the Grizzly H8192 Combo Sander. This document provides detailed specifications for the 1" x 42" belt and 8" disc sander, including its electrical requirements, dimensions, and construction materials. I am ready to answer your questions about this device's features and specifications.
  • What is the power requirement for this sander?
    What is the sanding belt speed?
    What is the diameter of the sanding disc?
    What type of switch does this sander use?
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model H8192
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL H8192 1" X 42" BELT / 8" DISC COMBO SANDER
Product Dimensions:
Weight............................................................................................................................................................. 58.5 lbs.
Width (side-to-side) x Depth (front-to-back) x Height...............................................................19-1/2 x 26 x 14-1/2 in.
Footprint (Length x Width)..................................................................................................................... 11 x 18-1/4 in.
Shipping Dimensions:
Type..................................................................................................................................................... Cardboard Box
Content........................................................................................................................................................... Machine
Weight................................................................................................................................................................ 64 lbs.
Length x Width x Height....................................................................................................................... 15 x 22 x 14 in.
Electrical:
Power Requirement........................................................................................................... 110V, Single-Phase, 60 Hz
Prewired Voltage.................................................................................................................................................. 110V
Full-Load Current Rating.......................................................................................................................................... 4A
Minimum Circuit Size..............................................................................................................................................15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Plug Included..........................................................................................................................................................Yes
Included Plug Type................................................................................................................................................ 5-15
Switch Type.................................................................................................. Toggle Safety Switch w/Removable Key
Motors:
Main
Horsepower............................................................................................................................................. 1/3 HP
Phase............................................................................................................................................ Single-Phase
Amps.............................................................................................................................................................. 4A
Speed................................................................................................................................................ 1725 RPM
Type............................................................................................................................ Capacitor-Start Induction
Power Transfer ............................................................................................................................... V-Belt Drive
Bearings..................................................................................................... Shielded & Permanently Lubricated
Main Specifications:
Belt Sander Info
Sanding Belt Width...................................................................................................................................... 1 in.
Sanding Belt Length.................................................................................................................................. 42 in.
Sanding Belt Speed........................................................................................................................... 3000 FPM
Table Length................................................................................................................................................ 7 in.
Table Width..................................................................................................................................................6 in.
Table Thickness......................................................................................................................................9/16 in.
Table Tilt............................................................................................................................ Left 0, Right 45 deg.
Table-to-Floor Height................................................................................................................................... 8 in.
Platen Type................................................................................................................................................ Steel
Platen Length...............................................................................................................................................4 in.
Platen Width................................................................................................................................................ 1 in.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model H8192
Disc Sander Info
Disc Diameter.............................................................................................................................................. 8 in.
Disc Speed........................................................................................................................................ 1725 RPM
Disc Sandpaper Backing Type.................................................................................................................... PSA
Table Length.............................................................................................................................................. 10 in.
Table Width..................................................................................................................................................4 in.
Table Thickness........................................................................................................................................3/4 in.
Table Tilt............................................................................................................................ Left 0, Right 45 deg.
Table-to-Floor Height.............................................................................................................................5-1/2 in.
Construction Materials
Base.............................................................................................................................................. Formed Steel
Table....................................................................................................................................... Ground Cast Iron
Frame...................................................................................................................................................Cast Iron
Disc.....................................................................................................................................................Aluminum
Miter Gauge................................................................................................................................................Steel
Paint Type/Finish....................................................................................................................... Powder Coated
Other Related Info
Miter Gauge Slot Width........................................................................................................................... 12 mm
Miter Gauge Slot Height............................................................................................................................ 5 mm
Number of Dust Ports....................................................................................................................................... 2
Dust Port Size.............................................................................................................................................. 2 in.
Other Specifications:
Serial Number Location .......................................................................................................Machine ID Tag on Motor
Features:
Dual Cast-Iron Tables with Miter Slots
Tables Tilt to 45 Degree
Two 2" Dust Ports
Single Knob Belt Tracking
/