iGuzzini X484 Installation guide

iGuzzini
Brand
iGuzzini
Model
X484
Type
Installation guide

iGuzzini X484 is a versatile and powerful device that can be used for a variety of applications. With its 3Nm torque, it is perfect for tasks that require a high level of precision and control. The two areas marked with asterisks indicate where the distance between the louvres in the metal increases. These areas must be on the same axis as the iGuzzini wording. This unique feature allows for increased airflow and cooling, making the X484 ideal for use in demanding environments. Additionally, the X484 is compatible with a wide range of accessories, making it a truly customizable tool.

iGuzzini X484 is a versatile and powerful device that can be used for a variety of applications. With its 3Nm torque, it is perfect for tasks that require a high level of precision and control. The two areas marked with asterisks indicate where the distance between the louvres in the metal increases. These areas must be on the same axis as the iGuzzini wording. This unique feature allows for increased airflow and cooling, making the X484 ideal for use in demanding environments. Additionally, the X484 is compatible with a wide range of accessories, making it a truly customizable tool.

1
2.510.649.00
IS15104/00
3Nm
Art. X483 - JYY2 - X530 3Nm
3Nm
Art. X484
Art. X485
Gli asterischi contraddistinguono due aree in cui l'interdistanza tra le feritoie della lamiera
aumenta. Esse devono trovarsi sullo stesso asse della scritta iGuzzini.
The asterisks mark two areas in which the distance between the louvres in the metal
increases. These must be on the same axis as the iGuzzini wording.
Les astérisques identifi ent deux zones où l’espacement entre les fentes de la tôle au-
gmente. Elles doivent se trouver sur le même axe que l’inscription iGuzzini
Mit den Sternchen werden zwei Bereiche gekennzeichnet, in denen der Abstand zwi-
schen den Schlitzen des Blechs zunimmt. Diese müssen sich auf derselben Achse der
Aufschrift iGuzzini
De sterretjes geven twee verschilende gebieden aan waarin de onderlinge afstand tussen
de spleten in het plaatstaal toeneemt. Ze moeten zich allebei op de lijn van de naam
iGuzzini bevinden
Los asteriscos distinguen dos áreas en las que la distancia entre las ranuras de la chapa
aumenta. Estas deben estar sobre el mismo eje de la palabra iGuzzini
Asteriskerne kendetegner to områder hvori den indbyrdes afstand mellem metalpladens
åbninger forøges. Disse skal stå på samme linje som påskriften iGuzzini
Asteriskene markerer to områder der avstanden mellom åpningene i platen øker. Disse
skal befi nne seg på samme akse som teksten iGuzzini
Asteriskerna markerar två områden i vilka avståndet mellan plåtens öppningar ökar.
Öppningarna ska fi nnas på samma axel som texten iGuzzini
̮͉͎͕͇͓͌͋͑͞͏͉͔͋͌͒͌͢͢͉͋͌͎͕͔͢͉͕͙͕͑͗͢͜͇͙͕͔͗ͦ͘͘͏͌͓͍͚͌͋͖͕͎͓͗͗͌ͦ͏͉
͖͇͙͒͘͏͔͌͚͉͌͒͏͔͕͌͞̵͔͏͕͍͔͋͒͢͔͇͕͋͜͏͙ͣͦ͘͔͇͕͔͕͋͐͕͘͏͘͔͇͖͋͏ͣͥ͘L*X]]LQL
㢮⚆䞷ℝ⒡⒕⒉㨎冬梃恬⬭┯䤓₳⧦◉⩮ᇭ扨K冬椨ㄣ₝L*X]]LQL䤓㠖ⷦ⚛戃ᇭ
IT
EN
FR
DE
NL
ES
DA
NO
SV
RU
ZH
Art. X530 *
*
NO
TWILIGHT NEMA VERSION
Art. X485
  • Page 1 1

iGuzzini X484 Installation guide

iGuzzini
Brand
iGuzzini
Model
X484
Type
Installation guide

iGuzzini X484 is a versatile and powerful device that can be used for a variety of applications. With its 3Nm torque, it is perfect for tasks that require a high level of precision and control. The two areas marked with asterisks indicate where the distance between the louvres in the metal increases. These areas must be on the same axis as the iGuzzini wording. This unique feature allows for increased airflow and cooling, making the X484 ideal for use in demanding environments. Additionally, the X484 is compatible with a wide range of accessories, making it a truly customizable tool.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents