Wista WST-SBL-3 Series Installation guide

Suzhou Wista Lighting Technology Co., Ltd.

INSTALLATION GUIDE

IMPORTANT SAFEGUARDS：

1. Read and follow all safety instructions.

2. Lights must be installed by professional electrician.

3. This instruction is for WST-SBL-3 series, 100W, 120W & 150W, as well as WST-ST-1 series, 100W & 150W.

4. Should you have any question, please contact us or local distributors for help.

5. Disconnect power before installation.

TO INSTALL:

Part 1

Part 2

Suzhou Wista Lighting Technology Co., Ltd.

U BRACKET MOUNT

STEP 1.

Drilling two mounting holes on the wall according to the sizes of the lighting bracket and then put the expansion screws

into the holes.

STEP 2.

Using the nuts to fix the fixture to the wall aiming at the expansion screws and tighten the nuts.

STEP3.

Adjusting mounting bracket angle by fixing bolt to meet the different angles the needs.

STEP4.

Connecting AC wire in driver box.

Download PDF