2. LIGHT MY BRICKS
  3. 10309

LIGHT MY BRICKS 10309 Operating instructions

  • Hello! I've reviewed the Light My Bricks LEGO Succulents 10309 Light Kit Installation Guide and I'm ready to help you with any questions. This document provides detailed steps for installing the light kit, including the correct placement of bit lights, connecting cables, and expansion boards. I can help with troubleshooting, identifying components, and understanding the connections described in the guide.
  • What should I do if the lights are not working?
    How do I lay cables in between bricks?
    How should I connect light connectors to ports of Expansion Boards?
LEGO® SUCCULENTS #10309
LIGHT KIT
INSTALLATION GUIDE
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO SUCCULENTS 10309
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Succulents 10309 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
10 x White 30cm Bit Light *
2 x Pink 30cm Bit Light
1 x 6-Port Expansion Board
1 x 8-Port Expansion Board
4x Adhesive Squares
• 3x Bar 4L - Trans Green
• 1x 1x1 Round Tile - Lavender
• 2x 1x1 Round Plate - Trans Red
• 1x 1x1 Round Plate - Trans Clear
• 1x 1x1 Round Plate - Trans Yellow
• 1x 1x1 Round Plate - Trans Light Green
• 1x 1x1 Round Plate - Trans Dark Green
• 1x 1x1 Round Plate - Trans Dark Blue
• 1x 1x1 Round Plate - Trans Purple
• 1x 1x1 Round Plate - Trans Pink
1x 5cm Connecting Cable
1x USB Power Cable
(Power Source not Included)
* Indicates components which include spares
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
32
33
38
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1 2
White 30cm Bit Light
1x1 Round Plate - Trans Red
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
3 4
White 30cm Bit Light
1x1 Round Plate - Trans Red
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
56-Port Expansion Board
USB Power Cable
Connect the other
end to a 5V USB
Power Bank, 5V USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
6
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
1x1 Round Plate - Trans Pink
Pink 30cm Bit Light
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
7
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Connect the other
end to a 5V USB
Power Bank, 5V USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8 9
White 30cm Bit Light
5cm Connecting Cable1x1 Round Plate - Trans Light
Green
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Connect all
the flowers back
together.
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10
11 White 30cm Bit Light
1x1 Round Plate - Trans Dark
Green
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
12
White 30cm Bit Light
1x1 Round Plate - Trans Dark
Blue
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
13
14
1x1 Round Plate - Trans Purple 1x1 Round Tile - Lavender
Pink 30cm Bit Light
Thread the cable
in between the petals
so that it comes out
at the bottom.
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
15
Push the brown
bar out from the top
LEGO SUCCULENTS 10309 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
16 White 30cm Bit Light
Bar 4L - Trans Green
Use the removed
brown bar to
measure how far
the trans green bar
sticks out
/