Page is loading ...
CC
D
C-C
Push back the
part as much
as you can
Step 1
Place left part on
whiteboard edge
on preferred height
E
Use the screws
supplied in bulk
to fix the left part
to the whiteboard
Make sure the
right part is placed
on the same height
as the left part.
F
Push back the right
part as much as
possible like in step 1.
Use the screw
supplied in bulk to
fix the part to the
whiteboard.
Step 2
Step 3 Step 4
T499568 00
Note
: This document and specifications herein are confidential and the exclusive property of Vogel's Products b.v. Neither this design nor any information
contained in this drawing may be reproduced or disclosed to others without written consent of Vogel's Products b.v. The design and information will not be
reproduced, copied or used, either in part or in its entirety, as the basis for the manufacture or sale of items without written permission.
Warning:
Please study all instructions and illustrations carefully before installation.
Information in this document is subject to change without further notice.
Product data sheet
11-07-23
23034 - Whiteboard lock
Mounting instructions
Century Gothic .9
/
