SMC Networks 11N User manual

Category
Networking
Type
User manual

This manual is also suitable for

EZ Connect
TM
N
Draft 11n Wireless USB2.0 Adapter
SMCWUSBS-N
20 Mason
Irvine, CA 92618
Phone: (949) 679-8000
Wireless USB Adapter
User Guide
The easy way to make all your network connections
October 2007
Pub. # 149100040600E
E102007-EK-R01
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and
reliable. However, no responsibility is assumed by SMC for its use, nor for any
infringements of patents or other rights of third parties which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of SMC.
SMC reserves the right to change specifications at any time without notice.
Copyright © 2007 by
SMC Networks, Inc.
20 Mason
Irvine, CA 92618
All rights reserved. Printed in Taiwan
Trademarks:
SMC is a registered trademark; and EZ Switch, TigerStack and TigerSwitch are
trademarks of SMC Networks, Inc. Other product and company names are trademarks or
registered trademarks of their respective holders.
v
Limited Warranty
Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be
free from defects in workmanship and materials, under normal use and service, for the
applicable warranty term. All SMC products carry a standard 90-day limited warranty from
the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion,
repair or replace any product not operating as warranted with a similar or functionally
equivalent product, during the applicable warranty term. SMC will endeavor to repair or
replace any product returned under warranty within 30 days of receipt of the product.
The standard limited warranty can be upgraded to a Limited Lifetime* warranty by
registering new products within 30 days of purchase from SMC or its Authorized Reseller.
Registration can be accomplished via the enclosed product registration card or online via
the SMC Web site. Failure to register will not affect the standard limited warranty. The
Limited Lifetime warranty covers a product during the Life of that Product, which is
defined as the period of time during which the product is an “Active” SMC product. A
product is considered to be “Active” while it is listed on the current SMC price list. As new
technologies emerge, older technologies become obsolete and SMC will, at its discretion,
replace an older product in its product line with one that incorporates these newer
technologies. At that point, the obsolete product is discontinued and is no longer an
“Active” SMC product. A list of discontinued products with their respective dates of
discontinuance can be found at:
http://www.smc.com/index.cfm?action=customer_service_warranty.
All products that are replaced become the property of SMC. Replacement products may
be either new or reconditioned. Any replaced or repaired product carries either a 30-day
limited warranty or the remainder of the initial warranty, whichever is longer. SMC is not
responsible for any custom software or firmware, configuration information, or memory
data of Customer contained in, stored on, or integrated with any products returned to
SMC pursuant to any warranty. Products returned to SMC should have any
customer-installed accessory or add-on components, such as expansion modules,
removed prior to returning the product for replacement. SMC is not responsible for these
items if they are returned with the product.
Customers must contact SMC for a Return Material Authorization number prior to
returning any product to SMC. Proof of purchase may be required. Any product returned
to SMC without a valid Return Material Authorization (RMA) number clearly marked on
the outside of the package will be returned to customer at customer’s expense. For
warranty claims within North America, please call our toll-free customer support number
at (800) 762-4968. Customers are responsible for all shipping charges from their facility to
SMC. SMC is responsible for return shipping charges from SMC to customer.
WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR
REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE
FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF
ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN
FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL
vi
NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION
DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS
CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR,
OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR
FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS
PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR
THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL
BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.
* SMC will provide warranty service for one year following discontinuance from the active
SMC price list. Under the limited lifetime warranty, internal and external power supplies,
fans, and cables are covered by a standard one-year warranty from date of purchase.
SMC Networks, Inc.
20 Mason
Irvine, CA 92618
i
Compliances
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to
channels 1 through 11.
Canada RSS Statement
This Class B digital apparatus complies with Canada RSS-210.
Cet appareil numérique de la classe B est conforme à la norme CNR-210 du Canada.
Canada IC Statement
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
ii
Australia/New Zealand AS/NZS 4771
Japan VCCI Class B
Taiwan DGT (NCC)
根據交通部低功率管理辦法規定:
第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅
自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象
時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信
法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
EC Conformance Declaration
Marking by the above symbol indicates compliance with the Essential Requirements of
the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the
following conformance standards:
EN 60950-1 (IEC 60950-1) - Product Safety
EN 300 328 - Technical requirements for 2.4 GHz radio equipment
EN 301 489-1, EN 301 489-17 - EMC requirements for radio equipment
This device is intended for use in the following European Community and EFTA countries:
Requirements for indoor vs. outdoor operation, license requirements and allowed
channels of operation apply in some countries as described below:
In Italy the end-user must apply for a license from the national spectrum authority to
operate this device outdoors.
In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz band:
Channel 13.
In France outdoor operation is only permitted using the 2.4 - 2.454 GHz band: Channels
1 - 7.
Austria Belgium Cyprus Czech Republic Denmark
Estonia Finland France Germany Greece
Hungary Iceland Ireland Italy Latvia
Liechtenstein Lithuania Luxembourg Malta Netherlands
Norway Poland Portugal Slovakia Slovenia
Spain Sweden Switzerland United Kingdom
iii
Council recommendation 1999/519/EC of 12 July 1999, limitations of exposure of the
general public to electromagnetic fields (0 Hz to 300 GHz)
Czech
Danish
German Hiermit erklärt SMC Networks, dass sich dieses Wireless LAN Gerat in Übereinstimmung mit
den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie
1999/5/EG befindet. Die offizielle EC-Declaration of Conformity finden Sie im Internet unter
http://www.smc.com
unter der entsprechenden Produktkategorie.
Estonian Käesolevaga kinnitab SMC Networks seadme Radio LAN device vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English Hereby, SMC Networks, declares that this Radio LAN device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The official
EC-Declaration of Conformity can be found under the corresponding product section on the
web http://www.smc.com
.
Spanish Por medio de la presente SMC Networks declara que el Radio LAN device cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE. The official EC-Declaration of Conformity can be found under the corresponding
product section on the web http://www.smc.com
.
Greek
French Par la présente SMC Networks déclare que l'appareil Radio LAN device est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. La
declaration de conformité officielle peut être trouvée sur notre site internet
http://www.smc.com
dans la rubrique Produits.
Italian Con la presente SMC Networks dichiara che questo Radio LAN device è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latvian
Lithuanian
Dutch Hierbij verklaart SMC Networks dat het toestel Radio LAN device in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Het officiële
EC- gelijkvormigheidattest kan men vinden op de internetsite http://www.smc.com
onder de
betrokken productcategorie.
Maltese Hawnhekk, SMC Networks, jiddikjara li dan Radio LAN device jikkonforma mal-htigijiet
essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Hungarian Alulírott, SMC Networks nyilatkozom, hogy a Radio LAN device megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polish
Portuguese SMC Networks declara que este Radio LAN device está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovak
Finnish SMC Networks vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen
Swedish Härmed intygar SMC Networks att denna Radio LAN device står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/
EG
SMC Networks tímto prohlašuje, že tento Radio LAN device je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Undertegnede SMC Networks erklærer herved, at følgende udstyr Radio LAN device overholder
de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ SMC Networks ΔΗΛΩΝΕΙ ΟΤΙ Radio LAN device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟ
Σ
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/ΕΚ.
A
r šo SMC Networks deklarē, ka Radio LAN device atbilst Direktīvas 1999/5/EK būtiskajām
p
rasībām un citiem ar to saistīta
j
iem noteikumiem.
Š
iuo SMC Networks deklaruoja, kad šis Radio LAN device atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Niniejszym SMC Networks oświadcza, że Radio LAN device jest zgodny z zasadniczymi
w
y
mo
g
ami oraz
p
ozostał
y
mi stosown
y
mi
p
ostanowieniami D
y
rekt
y
w
y
1999/5/EC.
SMC Networks týmto vyhlasuje, že Radio LAN device sp
ĺ
ňa základné požiadavky a všetky
p
ríslušné ustanovenia Smernice 1999/5/ES.
v
Countries of Operation & Conditions of Use in EC / EFTA member states
SMC Contact for this device in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuos Gelabert 6-8, 2, 4a,
08970 - Sant Joan Despi,
Barcelona, Spain
English This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in
all notified EC and EFTA member states. In accordance with article 6.4 of the R&TTE
Directive 1999/5/EC the following EC/ EFTA member states have been notified: Austria,
Belgium, Denmark, Finland, France, Germany, Italy, Luxembourg, Netherlands, Norway,
Spain, Sweden, Switzerland, United Kingdom, Portugal, Greece, Ireland, Iceland.
Requirements for outdoor operation, like license requirements and allowed channels of
operation apply in some countries. Please contact your local regulation authority or SMC
Networks for details on current restrictions for outdoor use.
French Ce produit est un appareil radio LAN transceiver de 2.4 GHz destiné aux PME et a l’utilisation
domestique dans tous les pays certifiés conformes aux conditions de l’EU et de l’EFTA. En
accord avec l’article 6.4 de la R&TTE directive 1999/5/EC, the membres de la EU et de
l’EFTA sont les suivants: Autriche, Belgique, Danemark, finalnde, France, Allemagne, Italie,
Luxembourg, Pays-Bas, Norvège, Espagne, Suède, Suisse, Royaume-Uni, Portugal, Grèce,
Irelande, Icelande. Des conditions sont appliquées à certains pays pour l’utilisation en
extérieur, tels que des licences spécifiques et des canaux d’opération. Veuillez contacter
votre autorité locale ou SMC Networks pour plus de détails quant aux restrictions actuelles
concernant l’utilisation en extérieur.
Dutch Dit toestel is een 2.4 Ghz draadloze Lan transceiver, bestemd voor gebruik binnen huis en
kantoor in alle geïnformeerde lidstaten van de EC en de EFTA.
In overeenstemming met artikel 6.4 van de R&T TE Directive 1999/5/EC zijn de volgende EC/
EFTA lidstaten verwittigd:
België, Denemarken, Duitsland, Finland, Frankrijk,Griekenland, Ierland, IJsland, Italië,
Luxemburg, Nederland, Noorwegen,Oostenrijk, Portugal, Spanje , Verenigd Koninkrijk,
Zweden, Zwitserland.
Benodigdheden voor gebruik buiten, zoals gebruiksvergunningen en toegelaten werkkanalen
zijn van toepassing in sommige landen. Gelieve uw lokale instantie of SMC Networks te
contacteren voor details op huidige beperkingen voor gebruik in buitenlucht.
Spanish Este aparato es un transmisor inalambrico de 2.4 GHz, previsto para el uso interior en
domicilios y Pymes en todos los Estados de la CE y la EFTA notificados. De acuerdo con el
artículo 6.4 de la Directiva R&TTE 1999/5/EC los siguientes estados de la CE y de la EFTA
han sido notificados: Austria, Bélgica, Dinamarca, Finlandia, Francia, Alemania, Italia,
Luxemburgo, Países Bajos, Noruega, Espana, Suecia, Suiza, Reino Unido, Portugal, Grecia,
Irlanda, Islandia. Los requisitos para su uso exterior, como requerimiento de licencia y
canales de operación permitidos se aplican en algunos paises. Por favor contacte la
autoridad reguladora local o SMC Networks para más detalles en relacion con las
restricciones actuales para uso exterior.
German Dieses Wireless LAN Gerat arbeitet im 2.4 GHz Frequenzband und ist fur den Einsatz im
Innenbereich in den benachrichtigten EC/ EFTA Mitgliedstaaten geeignet. In
Übereinstimmung mit Artikel 6.4 der R&TTE Direktive 1999/5/EC wurden folgende
Mitgliedstaaten benachrichtigt: Österreich, Belgien, Dänemark, Finland, Frankreich,
Deutschland, Italien, Luxemburg, Niederlande, Norwegen, Spanien, Schweden, Schweiz,
Großbritannien, Portugal, Griechenland, Irland, Island. Für den Einsatz im Aussenbereich
sind in einigen Ländern Lizenzen erforderlich oder die Anzahl der Kanäle ist eingeschränkt.
Bitte kontaktieren Sie Ihre Regulierungsbehörde oder SMC Networks für die aktuellen
Einschrankungen beim Einsatz im Aussenbereich.
v
About This Guide
Purpose
This guide details the hardware features of the wireless USB adapter, including its
physical and performance-related characteristics, and how to install the device and use its
configuration software.
Audience
This guide is for PC users with a working knowledge of computers. You should be familiar
with Windows operating system concepts.
Conventions
The following conventions are used throughout this guide to show information:
Note: Emphasizes important information or calls your attention to related features or
instructions.
Caution: Alerts you to a potential hazard that could cause loss of data, or damage the
system or equipment.
Warning: Alerts you to a potential hazard that could cause personal injury.
Related Publications
The following publication gives basic information on how to install and use the wireless
USB adapter.
Quick Installation Guide
Also, as part of the the wireless USB adapter’s software, there is online help that
describes all configuration related features.
Revision History
This section summarizes the changes in each revision of this guide.
October 2007 Revision
This is the first revision of this guide.
vii
Contents
Chapter 1: Introduction 1-1
Features 1-1
System Requirements 1-2
Package Checklist 1-2
Hardware Description 1-2
LED Indicators 1-3
WPS Button 1-3
Chapter 2: Driver and Utility Installation 2-1
Chapter 3: Configuration 3-1
Accessing the EZ Connect Wireless Utility 3-1
Wireless Utility Configuration 3-2
Profile 3-3
Network 3-9
Advanced 3-11
Statistics 3-12
WMM 3-13
WPS 3-14
Radio Setting 3-16
About 3-16
Help 3-17
Chapter 4: Network Planning 4-1
Network Topologies 4-1
Ad Hoc Wireless LAN 4-1
Infrastructure Wireless LAN 4-1
Chapter 5: AP Mode Configuration 5-1
Switching to AP Mode 5-1
AP Mode Utility Configuration 5-2
Configuration 5-3
Access Control 5-6
MAC Table 5-7
Event Log 5-8
Statistics 5-9
viii
Contents
About 5-10
Help 5-11
Appendix A: Troubleshooting A-1
USB Adapter Installation Problems A-1
Network Connection Problems A-1
Uninstalling the Utility A-2
Appendix B: Specifications B-1
1-1
Chapter 1: Introduction
The SMCWUSBS-N is a Wi-Fi (IEEE 802.11b/g/n) Wireless USB Adapter that
enables wireless connectivity for your PC. The device provides a Wi-Fi client
solution for PCs using a USB 2.0 interface. The USB adapter also includes a
comprehensive configuration, site survey, and profile management utility that can be
installed on a Windows 2000, Windows XP or Windows Vista system.
Features
Wi-Fi compliant with IEEE 802.11n (draft 2.0) and IEEEE 802.11b/g standards
High-speed connection up to 300 Mbps in 802.11n mode
Dynamic data rate scaling from 1 to 300 Mbps
Low interference and high susceptibility to guarantee reliable performance
Support WEP, WPA-PSK, WPA2-PSK security
Wi-Fi Protected Setup (WPS), including push button and PIN methods
WMM (Wi-Fi Multimedia)
Windows 2000, XP and Vista drivers
WHQL certified
WLAN site survey and profile management utility
Infrastructure and Ad-hoc operating modes
Link/Activity Indicator
WPS Indicator
WPS Button
Introduction
1-2
System Requirements
Before you install the EZ Connect Wireless USB Adapter, check your system meets
the following requirements:
2.4 GHz 802.11n (draft 2.0) or 802.11b/g wireless network.
Microsoft Windows 2000, XP or Vista.
A Notebook or desktop computer with:
- 300MHz CPU or above.
- Available USB2.0 port
- 20MB of available hard disk space
- CD-ROM drive
Package Checklist
The Wireless USB Adapter package includes these items:
EZ Connect N Wireless USB 2.0 Adapter (SMCWUSBS-N)
EZ Installation Wizard & Documentation CD
Quick Installation Guide.
Warranty Information Card
Inform your dealer if there are any incorrect, missing or damaged items. If possible,
retain the carton, including the original packing materials. Use them to repack the
product in case there is a need to return it.
Hardware Description
SMC’s EZ Connect Wireless USB Adapter supports wireless communications at up
to 300 Mbps. This adapter operates in the 2.4 GHz band and is fully compliant with
IEEE 802.11b/g and 802.11n (draft 2.0). It can be installed in a notebook or desktop
PC with a USB port. Support is provided for Windows 2000, Windows XP, and
Windows Vista.
LED Indicators
1-3
LED Indicators
The Wireless USB Adapter includes two status LED indicators, as described in the
following figure and table.
WPS Button
Use the WPS button on the Wireless USB Adapter to automatically connect multiple
devices to the network. Within two minutes, press the physical or virtual button on
wireless client devices to enable them to join the WLAN.
The WPS configuration process may be initiated on any device and there is no
restriction to the order in which buttons are pressed.
Any WPS-compatible devices could unintentionally join the WLAN if they are within
range during the two-minute set up period after the WPS button is pressed.
For more details about Wi-Fi Protected Setup, please refer to “WPS” on
page 3-14.
LED Status Description
WPS On/Flashing Green Indicates the WPS button is pressed, and WPS authentication is
in progress.
Off Indicates WPS authentication is not in progress.
Link/Activity On/Flashing Green Indicates the power is on, and the 802.11b/g/n radio is enabled.
Flashing indicates wireless network activity.
Off Indicates the power is off, or the 802.11b/g/n radio is disabled.
802.11b/g/n Link/Activity
WPS Authentication
Introduction
1-4
2-1
Chapter 2: Driver and Utility Installation
The CD-ROM that comes with the package contains the USB driver and software
utility for the Wireless USB Adapter. New or updated drivers can be downloaded
from SMC’s web site at http://www.smc.com.
The installation screens are similar for all Microsoft Windows systems. The
installation interface for only Windows XP is shown in this user guide.
To install the Wireless USB Adapter's driver and utilities for Windows 2000,
Windows XP or Windows Vista, follow these steps:
Important: Do not plug in the EZ Connect N Wireless USB2.0 Adapter until instructed.
Put the EZ Installation & Documentation CD into your CD-ROM drive. The
CD will auto run.
1. Turn on your PC and wait until the Windows system has completely started.
2. Load the driver and utility CD that comes with the package. The install program
should start automatically.
Click Install Driver and Utility to continue the installation.
Figure 2-1. EZ Connect N CD - Homepage
Note: If the install program does not start automatically, open the folder that displays the
CD’s contents and find the file "SMCWUSBS_N.exe" in the root directory. Double
click the file to start the install program.
Driver and Utility Installation
2-2
3. Click Next to continue the installation.
Figure 2-2. EZ Connect N CD - Driver and Utility Installation
4. Wait for the software installation procedure to complete.
Figure 2-3. EZ Connect N CD - Installation in Progress
2-3
5. When the “Installation Complete” message displays, click Finish.
Figure 2-4. EZ Connect N CD - Installation Finished
6. Insert the Wireless USB Apapter in an available USB slot. The new hardware is
detected and automatically installed. Now the device is ready to use.
Figure 2-5. Found New Hardware
Driver and Utility Installation
2-4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

SMC Networks 11N User manual

Category
Networking
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI