Welcome
Welcome to Sytech! Thank you for purchasing the new Blender SY-BV55. Please read this manual
carefully before operating your product and pay close attention to the precautions which are mentioned
below. Store this user manual in a safe place for future reference.
Important Safeguards
Please read the instruction manual before using.
Close supervision is necessary when the appliance is being operated near children.
When shifting the appliance from one place to another, handle it with great care; if the unit is dropped or hit, it
will stop functioning properly.
The appliance should always be laid on a smooth table or plane surface during use.
Do not let the cord hang over the edge of a table or touch hot surfaces.
Make sure the appliance is unplugged when not in use. Only plug in the plug to a wall outlet, do not use
extensions or multi socket outlets as this could provoke a circuit overload.
If your wall outlet becomes loose, the appliance may overheat. Should this occur, contact Sytech Service
Center.
Any attachment which is not supplied with the blender must not be used as it may cause fire, electric shock or
personal injuries.
Care shall be taken when handing the sharp cutting blades, emptying the bowl and during cleaning. Do not
misuse or you will be injured.
Make sure the appliance is properly & completely assembled before operating.
Do not touch the small cutting blades in the base
Do not immerse the unit in water or any other liquid. Use only a moist cloth to clean the body.
Do not use abrasives cleaners when cleaning this appliance.
This appliance has an overheating protection installed inside, when the appliance overheats, the power will
turn off. The appliance will resume normal functions once cooled down – usually after 15 minutes.
In order to prolong the life span of the machine, we suggest that the machine should stop for 3 seconds every
10 seconds. The appliance must not be used for more than 2 minutes continuously.
Do not exceed the maximum quantities and processing times indicated in the tables. Let hot ingredients cool
down before chopping them or pouring them into the blender jar unit (max.temperature80℃/175°F)
If the power cord is damaged, the unit does not function properly, or the blades or other accessories are
broken/damaged contact Sytech Service Center, never try to manipulate the product by yourself as this may
invalidate the guarantee.
Always store in a dry and safe place when the appliance is not being used.
Parts and Use of the SY-BV55
1：Spill-proof drinking lid
2：sport bottle
3：Blade assembly
4：blender base
5：Button switch
6：power cord
The blender is intended for Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
Avoid touching the sharp blades. If the blades get stuck, unplug the appliance and remove the ingredients that are
blocking the blades with a spatula.
1. Place the sports bottle on a flat surface with the open end facing up. Fill the
sports bottle with your favorite ingredients without exceeding the max
marking.
2. Fasten the blade assembly on the open end of the sport bottle. Turn the sport
bottle upside down, line up the arrows on the base, and place the sports bottle on
the base. Begin the blending process by simply pressing the sports bottle slightly
downwards.
To lock the sport bottle in the base for hands-free operation, simply turn the sport
bottle clockwise in the base. Blending will stop once you either stop pressing the
sport bottle downwards or once you unlock the sport bottle from the base.
3. Turn the sport bottle over and place on a flat surface. Replace the blade assembly
with the drinking lid and the bottle is ready to.
Product Cleaning:
Cleaning the appliance and its parts is easiest immediately after use.
- Do not use abrasives, scourers, alcohol, etc to clean the appliance.
- Never immerse the body unit in water or other liquids.
- Never clean it with water
- Never clean it in the dishwasher.
- Unplug the appliance and remove the detachable parts.
- Clean the parts in lukewarm water with some washing-up liquid and rinse them under the tap or clean
them in the dishwasher.
- If necessary, remove the rubber sealing ring from the blade units and rinse it with water.
- Use only a moist cloth to clean the body unit.
Specifications
- 0.5L capacity jar blender
- Jar capacity: 0.5 litre
- Stainless Steel blades
- Locking system with safety switch
- Single button operation
- Removable lid
- Includes lid with hanging loop for drinking
- Anti-slip rubber feet
- Power: 250W.
- Cable length: 1.0M.
- Power source: 220-240V.-50Hz.
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Blender
Sytech® SY-BV55 complies with the following directives:
CE Standard: Directive 2004/108/CE
ROHS Standard: 2011/65/EU Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
-
1
-
2
-
3
-
4
Sytech SYBV55A Owner's manual
- Category
- Blenders
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sytech SYBV4B Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Chefman RJ18-BLUE User guide
-
Breville Blend-Active Operating instructions
-
Oster BLSTIM-000-000 User manual
-
-
Andrew James Smoothie Juicer Owner's manual
-
-
Trebs COMFORTJUICER 99330 User manual
-
KALORIK 550W Personal Blender User manual
-
-
Russell Hobbs RHBL1300 Powercrush Blender User manual
