Whirlpool GSFS 60002 A+ User guide

Brand: Whirlpool

Model: GSFS 60002 A+

Type: User guide

GBD

5019 609 02013 Printed in Italy 07/12 - Bauknecht

1. Press the On/Off

button.

2. Select the suitable

program for your dishes

by means of the Program

Selection Knob.

3. Start the program by

pressing the Start/Pause

button.

Start/Pause lamp goes out as soon

as the program starts and Wash

lamp lights up.

Lamp on the Start/Pause button

lights up when the On/Off button

is pressed.

OPERATING THE MACHINE

q e w

1. Press the Start/Pause button.

2. Select the desired program by using the Program

Selection Knob after current program stops.

3. Start the new program by pressing the Start/Pause

button again. The new program resumes from the point

that the previous program has stopped.

qe w

You can follow the program flow by means of the program follow-up lamps on the control panel.

As long as washing continues the lights of washing, rinsing and drying are on

respectively. Machine remains silent for about 40-50 minutes when the drying

lamp is on.

When the program ends, end lamp lights up.

Do not open the door before the program ends.

PROGRAM FOLLOW-UP

If you would like to change the program when a washing program is in progress.

CHANGING THE PROGRAM

1. Press the Start/Pause button.

2. Turn the Program Selection Knob to Cancel position

3. Press the Start/Pause button again. Machine discharges

the water in it approximately for 30 seconds after pressing

the button.

4. Program will be cancelled when the End lamp lights up.

qrew

If you would like to cancel a washing program while it is running.

CANCELING A PROGRAM

Whirlpool GSFS 60002 A+ User guide

Brand: Whirlpool

Model: GSFS 60002 A+

Type: User guide

Download PDF

report

in other languages

polski: Whirlpool GSFS 60002 A+ instrukcja

Whirlpool GSFS 60002 A+ User guide

Whirlpool GSFS 60002 A+ User guide

in other languages

Related papers

Other documents