®
T 758 AV Surround Sound Receiver
BluOS Kit Installation Guide
© NAD T 758
SURR-B/FRONT-HT/
ZONE 2
SURR-B/FRONT-HT/
ZONE 2
7.1 CH INPUT
AUDIO 1FRONT CENTER SURR
FRONT-HT/
ZONE2
AUDIO 2 AUDIO 3 ZONE 2
IR INIR OUT
2
SURR-B/FRONT-HT/
ZONE 2
1
SWITCHED AC OUTLET
120V 60Hz 100W 1A MAX
120V 60Hz
USB/HDMI
AUDIO
PRE-OUT
REAR-HT/SURR-B FRONT-HT/SURR-B
OPTICAL COAXIAL
2 1
2 1
L RL
HDMI OUT (4K) HDMI IN 3USB HDMI IN 2
HDMI IN 1
R
DIGITAL
AUDIO IN
TRIG OUT +12V
© NAD T 758
SURR-B/FRONT-HT/
ZONE 2
SURR-B/FRONT-HT/
ZONE 2
7.1 CH INPUT
AUDIO 1FRONT CENTER SURR
FRONT-HT/
ZONE2
AUDIO 2 AUDIO 3 ZONE 2
IR INIR OUT
2
SURR-B/FRONT-HT/
ZONE 2
1
SWITCHED AC OUTLET
120V 60Hz 100W 1A MAX
120V 60Hz
USB/HDMI
AUDIO
PRE-OUT
REAR-HT/SURR-B FRONT-HT/SURR-B
OPTICAL COAXIAL
2 1
2 1
L RL
HDMI OUT (4K) HDMI IN 3USB HDMI IN 2
HDMI IN 1
R
DIGITAL
AUDIO IN
TRIG OUT +12V
1
3
2
IMPORTANT! Follow these installation steps to add BluOS capability to your T758.
Wi-Fi Key
Bluetooth USB Micro Adaptor
USB connector
NOTES
• The Wi-Fi dongle and Bluetooth USB
Micro Adaptor can be connected to any
of the 4 ports of the USB hub. If wireless
connectivity is poor, connect Wi-Fi
dongle to the supplied extension cable
and straighten out for better reception.
• Refer to T 758 owner’s manual for
guidelines about network configuration
and BluOS operation.
