®
BluOS Kit Installation Guide
© NAD T 758
SURR-B/FRONT-HT/
ZONE 2
SURR-B/FRONT-HT/
ZONE 2
7.1 CH INPUT
AUDIO 1FRONT CENTER SURR
FRONT-HT/
ZONE2
AUDIO 2 AUDIO 3 ZONE 2
IR INIR OUT
2
SURR-B/FRONT-HT/
ZONE 2
1
SWITCHED AC OUTLET
120V 60Hz 100W 1A MAX
120V 60Hz
USB/HDMI
AUDIO
PRE-OUT
REAR-HT/SURR-B FRONT-HT/SURR-B
OPTICAL COAXIAL
2 1
2 1
L RL
HDMI OUT (4K) HDMI IN 3USB HDMI IN 2
HDMI IN 1
R
DIGITAL
AUDIO IN
TRIG OUT +12V
© NAD T 758
SURR-B/FRONT-HT/
ZONE 2
SURR-B/FRONT-HT/
ZONE 2
7.1 CH INPUT
AUDIO 1FRONT CENTER SURR
FRONT-HT/
ZONE2
AUDIO 2 AUDIO 3 ZONE 2
IR INIR OUT
2
SURR-B/FRONT-HT/
ZONE 2
1
SWITCHED AC OUTLET
120V 60Hz 100W 1A MAX
120V 60Hz
USB/HDMI
AUDIO
PRE-OUT
REAR-HT/SURR-B FRONT-HT/SURR-B
OPTICAL COAXIAL
2 1
2 1
L RL
HDMI OUT (4K) HDMI IN 3USB HDMI IN 2
HDMI IN 1
R
DIGITAL
AUDIO IN
TRIG OUT +12V
1
3
2
IMPORTANT! Follow these installation steps to add BluOS capability to your T758, T187, T777, T787, M15HD and M17 installed with compatible MDC VM130 or MDC VM300.
Wi-Fi Dongle
Bluetooth USB Micro Adaptor
MDC VM130
(When installed with T758)
USB
Connector
USB
Connector
NOTES
Refer to the owner’s
manual of the
corresponding product for
guidelines about network
configuration and BluOS
operation.
The Wi-Fi dongle and
Bluetooth USB Micro
Adaptor can be
connected to any of the 4
ports of the USB hub.
MDC VM300
(When installed with T187, T777, T787, M15HD and M17)
USB
Connector
-
1
