Bogen PG8U/WPVMC User manual

Brand: Bogen

Model: PG8U/WPVMC

Type: User manual

The Bogen PG8U/WPVMC is a security cover designed to protect the settings of Power Vector amplifiers from tampering while allowing access to the power and meter switches. It also provides for access to any desired input volume control knobs via break-off sections. Installation is simple and requires only a thin, flathead screwdriver. The cover is made of durable materials and is backed by Bogen's reputation for quality.

Description

The Power Vector Security Cover (PVSC) provides protection against tampering.The sys-

tem settings of a Power Vector amplifier are protected from accidental tampering while

still leaving the power and meter switches accessible. It also provides for access to any

desired input volume control knobs via break-off sections.

Installation

Note: If access to any of the input volume control knobs is desired, be certain to remove the

break-off sections of the PVSC prior to its installation (see below).

1. Line up the PVSC to the front panel of the Power Vector amplifier using the screw

holes as a guide.

2. Attach the PVSC to the amplifier using the three screws provided.

Break-offs

Using a thin, flathead screwdriver, insert the

screwdriver head into the center of the

break-off piece and twist. If necessary, use a

knife or file to take off any sharp edges after

removal.

CAUTION: The break-off piece can fly off

while twisting and become a hazard. Take

reasonable precautions to prevent any flying

pieces from causing injury.

Specifications subject to change without notice.

Part No. 54-2076-01B Printed in USA. 0212

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com

Model PVSC

POWER VECTOR

SECURITY COVER

Description

The Power Vector Security Cover (PVSC) provides protection against tampering.The sys-

tem settings of a Power Vector amplifier are protected from accidental tampering while

still leaving the power and meter switches accessible. It also provides for access to any

desired input volume control knobs via break-off sections.

Installation

Note: If access to any of the input volume control knobs is desired, be certain to remove the

break-off sections of the PVSC prior to its installation (see below).

1. Line up the PVSC to the front panel of the Power Vector amplifier using the screw

holes as a guide.

2. Attach the PVSC to the amplifier using the three screws provided.

Break-offs

Using a thin, flathead screwdriver, insert the

screwdriver head into the center of the

break-off piece and twist. If necessary, use a

knife or file to take off any sharp edges after

removal.

CAUTION: The break-off piece can fly off

while twisting and become a hazard. Take

reasonable precautions to prevent any flying

pieces from causing injury.

Specifications subject to change without notice.

Part No. 54-2076-01B Printed in USA. 0212

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com

Model PVSC

POWER VECTOR

SECURITY COVER

Bogen PG8U/WPVMC User manual

Bogen PG8U/WPVMC User manual

Bogen PG8U/WPVMC User manual

Related papers