SPT 20001 Operating instructions

Brand: SPT

Model: 20001

Type: Operating instructions

MODEL: SF-608R, SF-609

Instruction on checking the water curtain:

1. Remove the two screws from the

back of the unit near the top

(IMG-01).

<IMG-01>

2. Take off the back housing (IMG-

02).

<IMG-02>

3. Sometimes the water pipe

connected to the back housing is

bent too much and it affects the

water flow (IMG-03). You may cut

the pipe shorter and make the water

flow smoother. (IMG-04)

<IMG-03>

<IMG-04>

4. Next thing to check is the water

curtain. The whole upper edge of the

water curtain should be folded and

touching water in the reservoir (IMG-

05). If it’s not (IMG-06), follow the next

steps to adjust the water curtain.

<IMG-05>

Cut it shorter

Water reservoir

<IMG-06>

5. Remove the clips that hold the water

curtain (IMG-07).

<IMG-07>

Water curtain is not installed

properly.

6. Remove the screws that hold the

water curtain (IMG-08) and move the

curtain upward till the curtain touchs the

bottom of the water reservoir like IMG-

05. Reposition the screws and clips.

<IMG-08>

7. Reposition the back housing and the

screws. (IMG-09)

<IMG-09>

 When putting the unit back together,

please make sure the white pipe on the

left goes back to the water tank and the

water curtain is not caught anywhere.

1
2
3
4

SPT 20001 Operating instructions

Brand: SPT

Model: 20001

Type: Operating instructions

Download PDF

Related papers

Other documents