NZXT Kraken X73 RGB User manual

KRAKEN X RGB SERIES

LIQUID COOLER WITH RGB FANS

ENGLISH

TABLE OF CONTENTS

1. COMPONENTS ................................... 02

3. INSTALLATION ................................... 13

2. PREPARATION ................................... 05

4. DOWNLOADING NZXT CAM ............. 27

5. APPENDIX ........................................ A-1

VERSION 3.0

02

KRAKEN X RGB SERIES

A. Kraken X53 / X63 / X73

x1

B. Intel Retention Bracket (Pre-Installed )

x1

C. AMD Retention Bracket

x1

D. Intel Backplate

x1

1. COMPONENTS

03

KRAKEN X RGB SERIES

COMPONENTS

E. Intel Socket 1200/115X Standoff

x4

F. Intel Socket 1700 Standoff

x4

G. AMD Standoff

x4

H. AMD Sleeve

x4

I. 30mm UNC 6-32 Fan Screw

X53 - x16, X63 - x16, X73 - x12

J. 5mm UNC 6-32 Screw

X53 - x8, X63 - x8, X73 - x12

K. Washer

X53 - x16, X63 - x16, X73 - x24

L. Thumbscrew

x4

AM4 AM5

04

KRAKEN X RGB SERIES

M. Breakout Cable Set

x1

N. Micro-USB Cable

x1

O. Fan Splitter Cable

x1

P. 500mm Fan Connection Cable

x1

Q. 50mm Fan-to-Fan cable

X53 - x1, X63 - x1, X73 - x2

R. Aer RGB Fan

X53 - x2 120mm, X63 - x2 140mm, X73 - x3 120mm

COMPONENTS

05

KRAKEN X RGB SERIES

2. PREPARATION

2.1 Preparation - Intel LGA 1700 & 1200 / 115X ........ 06

2.2 Preparation - AMD .......................................................... 09

06

KRAKEN X RGB SERIES

2.1 PREPARATION - INTEL LGA 1700 & 1200 / 115X

SOCKET 1200/115X SOCKET 1700

STEP 1 - PREPARING THE BACKPLATE

Move all four sliders on the Intel backplate to the innermost

positions for Socket 1200 / 115X or the outermost positions

for Socket 1700. D D

07

KRAKEN X RGB SERIES

2.1 PREPARATION - INTEL LGA 1700 & 1200 / 115X

STEP 2 - INSTALLING THE BACKPLATE

Install the Intel backplate on the rear of the motherboard as

oriented in the picture. Please ensure the sliders fit into the

mounting holes and the backplate of CPU socket fit within the

cut-out of the Intel backplate.

D

08

KRAKEN X RGB SERIES

STEP 3 - INSTALLING THE STANDOFFS

From the front of the motherboard, install the four

Socket 1700 & 1200 / 115X standoffs.

2.1 PREPARATION - INTEL LGA 1700 & 1200 / 115X

EF

or

09

KRAKEN X RGB SERIES

2.2 PREPARATION - AMD

STEP 1

Remove the stock AMD mounting bracket and keep the

original backplate on the rear of the motherboard.

FOR SOCKET TR4, PLEASE SKIP TO AMD - STEP 4

10

KRAKEN X RGB SERIES

STEP 2

From the front of the motherboard, install the four AMD sleeves.

Make sure you use the right side of the sleeve .

H

2.2 PREPARATION - AMD

AM5 AM4

11

KRAKEN X RGB SERIES

2.2 PREPARATION - AMD

STEP 3

From the front of the motherboard, install the four AMD

standoffs.

G

12

KRAKEN X RGB SERIES

STEP 4 - CHANGING THE RETENTION BRACKET

1. Press and hold the Intel retention bracket firmly towards the pump.

2. Rotate the Intel retention bracket counterclockwise to release.

3. Pull out the Intel retention bracket.

4. Follow these steps in reverse order to install the AMD retention bracket onto the pump. For SocketTR4,

Install the AMD SocketTR4 retention bracket included inside the Threadripper CPU retail box.

2.2 PREPARATION - AMD

or

1. 2. 3. 4.

C

13

KRAKEN X RGB SERIES

3. INSTALLATION

3.1 Installing the Pump - Pump Orientation ............... 14

3.5 Powering the Fans .......................................................... 20

3.3 Installing the Pump - AMD TR4 ................................. 16

3.7 Connecting the SATA Power Cable ........................... 223.2 Installing the Pump - INTEL/AMD AM5/AM4 ....... 15

3.6 Connecting the Pump Tach ......................................... 21

3.4 Mounting the Radiator and Fans .............................. 17

3.8 Connecting the USB Cable .......................................... 23

3.9 ................................................................................................ 24Connecting RGB LED for lighting control

3.10 .............................................................................................. 25Connecting the Aer RGB Fans

14

KRAKEN X RGB SERIES

3.1 INSTALLING THE PUMP - PUMP ORIENTATION

The pump cap has a rotatable upper cap with 12 locking points

for NZXT logo orientation. Depending on your motherboard, you

can orient the pump’s tube orientation to fit your needs.

15

KRAKEN X RGB SERIES

3.2 INSTALLING THE PUMP - INTEL/AMD AM5/AM4

Place the pump with the retention bracket onto the CPU.

Ensuring the standoffs go through the holes on the bracket

and securely apply the thumb nuts.

54MM

90MM

A

L

AMD SOCKET

90MM X 54MM AM4

SOCKET

1700

SOCKET 1200 / 115X

1

2

3

4

1

2

3

4

A

L

INTEL AMD AM5/AM4

16

KRAKEN X RGB SERIES

3.3 INSTALLING THE PUMP - AMD TR4

Place the pump with the retention bracket onto the CPU. The SocketTR4

screw holes has a short and long side. Ensure the four screws are

aligned and tighten the screws in sequence from 1 through 4.

1

3

4

2

46MM

65.2MM

17

KRAKEN X RGB SERIES

3.4 MOUNTING THE RADIATOR AND FANS

Depending on your radiator mounting setup,

please use the appropriate screws to mount the radiators:

• DIRECT MOUNTING

• INDIRECT MOUNTING

• Always use washers to prevent damage.

NOTE

18

KRAKEN X RGB SERIES

DIRECT MOUNTING

For mounting in which the radiator fits directly onto the

case, please install the fan(s) first using the 30mm fan

screws and washers. Use the 5mm case screws and washers

to mount the radiator.

3.4 MOUNTING THE RADIATOR AND FANS

J

K

A

R

K

I

19

KRAKEN X RGB SERIES

INDIRECT MOUNTING

For mounting in which the fan(s) fit between the radiator

and chassis, please use the 30mm fan screws and

washers for mounting.

3.4 MOUNTING THE RADIATOR AND FANS

K

A

R

I

Page is loading ...

NZXT Kraken X73 RGB User manual

This manual is also suitable for

NZXT Kraken X73 RGB User manual

Related papers

Other documents