C
B
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
• NO TOOLS REQUIRED, QUICK ATTACHMENT TO BIKE
• BASKET EASILY REMOVED FOR CARRYING
• SIZED FOR GROCERY BAG & MANY OTHER USES
• RUST RESISTANT DURABLE FINISH
• FITS MOST HANDLEBARS, EXCEPT RACING STYLE
PAT. D584,675
ASSEMBLY INSTRUCTIONS ON OTHER SIDE
WARNINGS :
•
DO NOT
overload basket.
Overloading basket may
cause difficulty in steering
and/or loss of bicycle control
which could result in injury.
• Make sure hooks of mounting
holder are securely down
against top of handlebar.
Mfgr.No.133WH (White)
Made in U.S.A. by Wald
C
2009 Wald LLC
Rev.C 3/18/2009
!!
Mfgr.No.133WH (White)
Made in U.S.A. by Wald
C
2009 Wald LLC
Rev.C 3/18/2009
WARNINGS :
•
DO NOT
overload basket.
Overloading basket may
cause difficulty in steering
and/or loss of bicycle control
which could result in injury.
• Make sure hooks of mounting
holder are securely down
against top of handlebar.
ASSEMBLY INSTRUCTIONS ON OTHER SIDE
PAT. D584,675
• NO TOOLS REQUIRED, QUICK ATTACHMENT TO BIKE
• BASKET EASILY REMOVED FOR CARRYING
• SIZED FOR GROCERY BAG & MANY OTHER USES
• RUST RESISTANT DURABLE FINISH
• FITS MOST HANDLEBARS, EXCEPT RACING STYLE
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
!
Mfgr.No.133WH (White)
Made in U.S.A. by Wald
C
2009 Wald LLC
Rev.C 3/18/2009
WARNINGS :
•
DO NOT
overload basket.
Overloading basket may
cause difficulty in steering
and/or loss of bicycle control
which could result in injury.
• Make sure hooks of mounting
holder are securely down
against top of handlebar.
ASSEMBLY INSTRUCTIONS ON OTHER SIDE
PAT. D584,675
• NO TOOLS REQUIRED, QUICK ATTACHMENT TO BIKE
• BASKET EASILY REMOVED FOR CARRYING
• SIZED FOR GROCERY BAG & MANY OTHER USES
• RUST RESISTANT DURABLE FINISH
• FITS MOST HANDLEBARS, EXCEPT RACING STYLE
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
C
WALD LLC MAYSVILLE, KY.
DRN
TITLE
APVD
SCALE
DATE
NO.
REVISIONS
ZONE
REV
DESCRIPTION
BY
DATE
CHAD
133WH BASKET -
ASSEMBLY INSTRUCTIONS
1:1
3-31-08
C-73005-A
A
B
C
D
E
F
A
B
C
D
E
F
1
2
3
4
5
6
1
2
3
4
5
6
A
CHAD
4-24-08
ADDED MFGR. NO. TO BACK SHEET
B
CHAD
6-3-08
ADDED "PATENT PENDING"
SHEET 1 OF 2
C
CHAD
3-18-09
ADDED PAT.NO. & B SHEET; REVISED WARNING NOTE - S.V.P.
LOCK END
SLOT
MOUNTING
HOLDER
SPIRAL WRAP
LOCK END
SLOT
MOUNTING
HOLDER
SPIRAL WRAP
LOCK END
SLOT
MOUNTING
HOLDER
SPIRAL WRAP
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
Mfgr.No.133WH (White)
• Raise basket handle upright.
• Pull away from holder and lift basket from bottom
hooks of holder.
TO REMOVE BASKET FROM HOLDER
• Apply spiral wrap to holder by unwinding one end and
wrapping it on holder as shown.
• Center and place large hooks of mounting holder over
handlebar.
Make sure hooks of mounting holder are
securely down against top of handlebar.
• Hold basket so lock end of handle is toward holder.
• Center and insert bottom basket wire over bottom
hooks of holder.
• Raise handle upright and insert lock end of handle
through slot at top of holder.
• Lay handle flat to lock.
ASSEMBLY INSTRUCTIONS
PAT. D584,675 PAT. D584,675
ASSEMBLY INSTRUCTIONS
• Apply spiral wrap to holder by unwinding one end and
wrapping it on holder as shown.
• Center and place large hooks of mounting holder over
handlebar. Make sure hooks of mounting holder are
securely down against top of handlebar.
• Hold basket so lock end of handle is toward holder.
• Center and insert bottom basket wire over bottom
hooks of holder.
• Raise handle upright and insert lock end of handle
through slot at top of holder.
• Lay handle flat to lock.
TO REMOVE BASKET FROM HOLDER
• Raise basket handle upright.
• Pull away from holder and lift basket from bottom
hooks of holder.
Mfgr.No.133WH (White)
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
PAT. D584,675
ASSEMBLY INSTRUCTIONS
• Apply spiral wrap to holder by unwinding one end and
wrapping it on holder as shown.
• Center and place large hooks of mounting holder over
handlebar. Make sure hooks of mounting holder are
securely down against top of handlebar.
• Hold basket so lock end of handle is toward holder.
• Center and insert bottom basket wire over bottom
hooks of holder.
• Raise handle upright and insert lock end of handle
through slot at top of holder.
• Lay handle flat to lock.
TO REMOVE BASKET FROM HOLDER
• Raise basket handle upright.
• Pull away from holder and lift basket from bottom
hooks of holder.
Mfgr.No.133WH (White)
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
A
WALD LLC MAYSVILLE, KY.
DRN
TITLE
APVD
SCALE
DATE
NO.
REVISIONS
ZONE
REV
DESCRIPTION
BY
DATE
CHAD
133WH BASKET -
ASSEMBLY INSTRUCTIONS
1:1
3-18-09
C-73005-B
A
B
C
D
E
F
A
B
C
D
E
F
1
2
3
4
5
6
1
2
3
4
5
6
SHEET 2 OF 2
A
CHAD
3-18-09
ADDED PAT. NO. & REVISED ASS'Y INSTRUCTIONS
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Pacific Cycle Mountain Bicycles; BMX Bicycles User manual
-
Avigo DUAL SUSPENSION MOUNTAIN BICYCLES User manual
-
Educational Insights Hoppy Floppy’s Happy Hunt™ Game Product Instructions
-
Baby Jogger CITY ELITE DOUBLE Assembly Instructions Manual
-
Baby Jogger City Mini Zip Assembly Instructions Manual
-
Baby Jogger PERFORMANCE SINGLE User manual
-
Bixs pedelec/e-bike Operating instructions
-
Baby Jogger Q-SERIES SINGLE Assembly Instructions Manual
-
Rifton New Adaptive Tricycle User manual
-
IMP SmartScoot User Instruction Manual
