Vivotek IB8367-R User manual

User’s Manual

IB8367-T/-RT

Outdoor • Day & Night • 30M IR • Cable Management

Bullet

Network Camera

IB8367/-R

Rev. 1.1

VIVOTEK

2 - User's Manual

Table of Contents

Overview ..............................................................................................................................................................3

Revision History ...............................................................................................................................................3

Read Before Use ..............................................................................................................................................4

Package Contents ............................................................................................................................................4

Symbols and Statements in this Document ...................................................................................................... 4

Physical Description .........................................................................................................................................5

Repeater Model (IB8367-R/RT) Cascade Connections ...................................................................................7

Hardware Installation ........................................................................................................................................ 9

Network Deployment ......................................................................................................................................13

Software Installation .......................................................................................................................................16

Ready to Use .................................................................................................................................................. 17

Auto Focus .....................................................................................................................................................18

Accessing the Network Camera .................................................................................................................... 19

Using Web Browsers ......................................................................................................................................19

Using RTSP Players ....................................................................................................................................... 22

Using 3GPP-compatible Mobile Devices ........................................................................................................ 23

Using VIVOTEK Recording Software .............................................................................................................24

Main Page ......................................................................................................................................................... 25

Client Settings .................................................................................................................................................. 30

Conguration .................................................................................................................................................... 35

System > General settings .............................................................................................................................36

System > Homepage layout ..........................................................................................................................38

System > Logs ...............................................................................................................................................41

System > Parameters .................................................................................................................................... 43

System > Maintenance ................................................................................................................................... 44

Media > Image .............................................................................................................................................48

Media > Video ................................................................................................................................................61

Media > Video ................................................................................................................................................62

Media > Audio.................................................................................................................................................68

Network > General settings ............................................................................................................................69

Network > Streaming protocols ....................................................................................................................77

Network > SNMP (Simple Network Management Protocol) ...........................................................................86

Security > User accounts ...............................................................................................................................87

Security > HTTPS (Hypertext Transfer Protocol over SSL) .................................................................88

Security > Access List ..................................................................................................................................95

PTZ > PTZ settings ......................................................................................................................................100

Event > Event settings..................................................................................................................................104

Applications > Motion detection....................................................................................................................118

Applications > DI and DO ...........................................................................................................................121

Applications > Tampering detection ............................................................................................................. 122

Applications > Audio detection ...................................................................................................................123

Applications > VADP (VIVOTEK Application Development Platform) .........................................................125

Recording > Recording settings ..................................................................................................................127

Local storage > SD card management ......................................................................................................... 132

VIVOTEK

User's Manual - 3

Local storage > Content management .....................................................................................................133

Appendix .................................................................................................................................................... 136

URL Commands for the Network Camera ................................................................................................ 136

Technical Specications ........................................................................................................................... 228

Technology License Notice ....................................................................................................................... 229

Electromagnetic Compatibility (EMC) .......................................................................................................230

Overview

VIVOTEK IB8367 series are stylish, bullet-style network cameras designed for diverse

outdoor applications. Equipped with a 2MP sensor enabling viewing resolution of

1920x1080 at a smooth 30 fps, the IB8367 series are all-in-one outdoor cameras capable

of capturing high quality and high resolution, especially in low light environment. In addition

to applying VIVOTEK’s notable bandwidth solution in Smart Stream and 3DNR, the

IB8367-T/-RT models are also designed with smart focus system to assit focus adjustment

more efciently.

To meet more outdoor applications and ease cable deployment, IB8367-R model is the rst

network camera designed with embedded extender to allow PoE input and PoE output.

Users can implement a total PoE solution perfectly. Incorporating a number of advanced

features standard for VIVOTEK cameras, the IB8367 series are the ideal solutions for your

outdoor surveillance needs.

Revision History

■ Rev. 1.0: Initial release.

■ Rev. 1.1: Added information for the IB8367-T and IB8367-RT.

VIVOTEK

4 - User's Manual

Read Before Use

The use of surveillance devices may be prohibited by law in your country. The Network Camera

is not only a high-performance web-ready camera but can also be part of a exible surveillance

system. It is the user’s responsibility to ensure that the operation of such devices is legal before

installing this unit for its intended use.

It is important to first verify that all contents received are complete according to the Package

Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network

Camera is installed; then carefully read and follow the instructions in the Installation chapter to

avoid damage due to faulty assembly and installation. This also ensures the product is used

properly as intended.

The Network Camera is a network device and its use should be straightforward for those who

have basic networking knowledge. It is designed for various applications including video sharing,

general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the

Network Camera and ensure proper operations. For creative and professional developers, the URL

Commands of the Network Camera section serves as a helpful reference to customizing existing

homepages or integrating with the current web server.

Package Contents

■ IB8367, IB8367-R, IB8367-T, or IB8367-RT.

■ L-type Hex key wrench, dessicant bag, screws

■ Software CD

■ Quick Installation Guide & alignment sticker

Symbols and Statements in this Document

i

INFORMATION: provides important messages or advices that might help prevent

inconvenient or problem situations.

NOTE: Notices provide guidance or advices that are related to the functional integrity of

the machine.

Tips: Tips are useful information that helps enhance or facilitae an installation, function,

or process.

WARNING! or IMPORTANT!: These statements indicate situations that can be

dangerous or hazardous to the machine or you.

Electrical Hazard: This statement appears when high voltage electrical hazards might

occur to an operator.

VIVOTEK

User's Manual - 5

Physical Description

Front Panel

IR LEDs

Lens

Reset Button

SD/SDHC Card Slot

Zoom/focus pullers*

* The T and RT models have auto-focus motorized lens.

NOTE:

VIVOTEK

6 - User's Manual

Connectors

Au+

Au-

MIC P

MIC N

DO+

DO-

DI+

DI-

General I/O Terminal Block

Ethernet 10/100 RJ45 Plug

The second LAN port (PoE out, yellow) is

available on the IB8367-R/RT. The IB8367-R/RT

comes without the DC connector.

WARNING:

The yellow LAN port (PoE output) can only be used to connect to another IB8367 camera.

Please do not connect the yellow LAN port to a PC or switch LAN port. The high voltage

can damage the LAN port circuits.

VIVOTEK

User's Manual - 7

Repeater Model (IB8367-R/RT) Cascade Connections

1 2341 2 3 4

LA N

Po E

UPL I NK

Po E

ON

OFF

4xFE PoE + 1xFE Switch

UPLINK

POWER ON

AW-FED-0500-120

100m

IB8367-R

IB8367

IB8338-HR

IB8367-RT

IB8338

Each camera consumes up to 14.5W power. Up to 2 IB8367-R/RT and 1 IB8367 can be

cascaded in a conguration with a cabling distance of up to 300 meters. The precondition

is the use of the AE-FED-0500-120 PoE switch, which can deliver more than 50W of power

per port (exceeding the 802.3at specications).

Please use quality cables when cabling over an extended distance. Power loss due to

resistance can occur with low-quality cables.

VIVOTEK

8 - User's Manual

Other-brand 802.3at PoE switch

100m

IB8367-R

IB8367

IB8367-RT

IB8367-T

When using an ordinary 802.3at PoE switch, up to 1 IB8367-R/RT and 1 IB8367 can be

cascaded in a conguration with a cabling distance of up to 200 meters.

Please use quality cables when cabling over an extended distance.

VIVOTEK

User's Manual - 9

Hardware Installation

1. Attach the included alignment sticker to a preferred location. Drill holes for mounting

screws and a cabling hole.

2. Loosen the fastening ring on the mount bracket, and aim the camera at the area of your

interest. When done, tighten the fastening ring.

Fastening ring

VIVOTEK

10 - User's Manual

Wall Mount

3. Secure the Network Camera to a wall or ceiling.

Ceiling Mount

5. Install the "Installation Wizard 2" software utility.

6. The program will search for VIVOTEK Video Receivers, Video Servers or Network Cameras

on the same LAN.

7. Double-click on the camera's MAC address to open a browser management session with the

camera.

4. Connect the Ethernet and IO wires.

VIVOTEK

User's Manual - 11

M

SD

8

9

11

10

8. Open the top cover using the included stardriver

9. Install an SD card.

10. With a live view displayed on your laptop, adjust the zoom and focus pullers to obtain

an optimal image. Check the live view to ensure the image is in focus. Carefully tighten

the pullers when done.

Skip this step if using the IB8367-T and -RT models. The "T" models comes with

motorized focus lens. Use the Auto Focus function in rmware for best image.

11. Replace the desiccant bag on the top cover.

12. Close the top cover and fasten the anti-tamper screws.

VIVOTEK

12 - User's Manual

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes

resetting the system can return the camera to normal operation. If the system problems remain

after reset, restore the factory settings and install again.

Reset: Press the recessed reset button. Wait for the Network Camera to reboot.

Restore: Press and hold the reset button until the status LED rapidly blinks. Note that all settings

will be restored to factory default. Upon successful restore, the status LED will blink green and

red during normal operation.

SD/SDHC/SDXC Card Capacity

This network camera is compliant with SD/SDHC 16GB / 8GB / 32GB / 64GB and other

preceding standard SD cards.

Reset Button

VIVOTEK

User's Manual - 13

Network Deployment

General Connection (PoE)

When using a PoE-enabled switch

The Network Camera is PoE-compliant, allowing transmission of power and data via a sin-

gle Ethernet cable. Follow the below illustration to connect the Network Camera to a PoE-

enabled switch via Ethernet cable.

PoE Switch

When using a non-PoE switch

Use a PoE power injector (optional) to connect between the Network Camera and a non-

PoE switch.

Non-PoE Switch

PoE Power Injector

(optional)

NOTE:

1. The camera is only to be connected to PoE networks without routing to outside plants.

2. For PoE connection, use only UL listed I.T.E. with PoE output.

802.3af

VIVOTEK

14 - User's Manual

Internet connection via a router

Before setting up the Network Camera over the Internet, make sure you have a router and follow

the steps below.

1. Connect your Network Camera behind a router, the Internet environment is illustrated below.

Regarding how to obtain your IP address, please refer to Software Installation on page 16 for

details.

IP address : 192.168.0.3

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

IP address : 192.168.0.2

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

LAN (Local Area Network)

Router IP address : 192.168.0.1

WAN (Wide Area Network )

Router IP address : from ISP

Cable or DSL Modem

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

Internet

2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is

192.168.0.3, please forward the following ports for the Network Camera on the router.

■ HTTP port: default is 80

■ RTSP port: default is 554

■ RTP port for video: default is 5556

■ RTCP port for video: default is 5557

If you have changed the port numbers on the Network page, please open the ports

accordingly on your router. For information on how to forward ports on the router, please refer

to your router’s user’s manual.

3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).

Use the public IP and the secondary HTTP port to access the Network Camera from the

Internet. Please refer to Network Type on page 70 for details.

Internet connection with static IP

Choose this connection type if you are required to use a static IP for the Network Camera.

Please refer to LAN setting on page 69 for details.

Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to

PPPoE on page 70 for details.

VIVOTEK

User's Manual - 15

Congure the router, virtual server or rewall, so that the router can forward any data com-

ing into a precongured port number to a network camera on the private network, and

allow data from the camera to be transmitted to the outside of the network over the same

path.

From Forward to

122.146.57.120:8000 192.168.2.10:80

122.146.57.120:8001 192.168.2.11:80

... ...

When properly congured, you can access a camera behind the router using the HTTP

request such as follows: http://122.146.57.120:8000

If you change the port numbers on the Network conguration page, please open the ports

accordingly on your router. For example, you can open a management session with your

router to congure access through the router to the camera within your local network.

Please consult your network administrator for router conguration if you have troubles with

the conguration.

For more information with network conguration options (such as that of streaming ports),

please refer to Conguration > Network Settings. VIVOTEK also provides the automatic

port forwarding feature as an NAT traversal function with the precondition that your router

must support the UPnP port forwarding feature.

VIVOTEK

16 - User's Manual

Software Installation

Installation Wizard 2 (IW2), a software included in the product CD, helps you set up your

Network Camera on the LAN.

1. Install IW2 under the Software Utility directory from the software CD.

Double-click the IW2 shortcut on your desktop to launch the program.

2. The program will conduct an analysis of your network environment.

After your network environment is analyzed, please click Next to continue the program.

3. The program will search for all VIVOTEK network devices on the same LAN.

4. After a brief search, the installer window will prompt. Click on the MAC and model name

that matches the one printed on the product label. You can then double-click on the address

to open a management session with the Network Camera.

0002D1730202

00-02-D1-73-02-02 192.168.5.151 IB8367

Installation

Wizard 2

IW

2

Network Camera

Model No: IB8367

Made in Taiwan

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Pat. 6,930,709

MAC:0002D1730202

R o H S

VIVOTEK

User's Manual - 17

Ready to Use

1. A browser session with the Network Camera should prompt as shown below.

2. You should be able to see live video from your camera. You may also install the 32-channel

recording software from the software CD in a deployment consisting of multiple cameras. For

its installation details, please refer to its related documents.

VIVOTEK

18 - User's Manual

Auto Focus

On the web session, visit the Conguration > Image > Focus window. Perform the Auto

Focus function for best image. However, if you have cascaded cameras, do this one

by one. Do not perform this function simultaneously on multiple cameras because the

motorized lens also consume considerable power, and may cause the last camera on the

line to hang.

VIVOTEK

User's Manual - 19

Accessing the Network Camera

This chapter explains how to access the Network Camera through web browsers, RTSP players,

3GPP-compatible mobile devices, and VIVOTEK recording software.

Using Web Browsers

Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN.

If your network environment is not a LAN, follow these steps to access the Netwotk Camera:

1. Launch your web browser (e.g., Microsoft® Internet Explorer or Mozilla Firefox).

2. Enter the IP address of the Network Camera in the address eld. Press Enter.

3. Live video will be displayed in your web browser.

4. If it is the rst time installing the VIVOTEK network camera, an information bar will prompt as

shown below. Follow the instructions to install the required plug-in on your computer.

NOTE

► For Mozilla Firefox or Chrome users, your browser will use Quick Time to stream the live

video. If you don’t have Quick Time on your computer, please download it rst, then launch

the web browser.

NOTE:

VIVOTEK

20 - User's Manual

► By default, the Network Camera is not password-protected. To prevent unauthorized access,

it is highly recommended to set a password for the Network Camera.

For more information about how to enable password protection, please refer to Security on

page 87.

► If you see a dialog box indicating that your security settings prohibit running ActiveX®

Controls, please enable the ActiveX® Controls for your browser.

1. Choose Tools > Internet Options > Security > Custom Level.

2. Look for Download signed ActiveX® controls; select Enable or Prompt. Click OK.

3. Refresh your web browser, then install the ActiveX® control. Follow the instructions to

complete installation.

Page is loading ...

Vivotek IB8367-R User manual

Related papers

Other documents