Displays2go BKDNTVSTCP Assembly Instructions

Brand: Displays2go

Model: BKDNTVSTCP

Type: Assembly Instructions

Assembly Instructions

VOYAGER TV

STAND WITH

CUSTOM

GRAPHICS

SKU: BKDNTVSTCP

SKU: BKDNTVSTG (Replacement Banner)

Scan the QR

code to visit the

product page.

PARTS LIST

SAFETY INFORMATION

• Fits most ﬂat panel TVs 26”- 60” screens

• Load capacity: 110 pounds (50 kg)

• VESA compliance: 200 x 200 mm, 200 x 400 mm, 300 x 300 mm, 400 x 400 mm

PART QUANTITY

A: Vertical Pole (Top) ............................................................................................2

B: Vertical Pole (Bottom) .......................................................................................2

C: Horizontal Bar ..................................................................................................2

D: Stabilizer Bar ....................................................................................................1

E: Foot ....................................................................................................................2

F: Custom Fabric Banner ......................................................................................1

G: TV Mount Kit (screwdriver included) ..............................................................1

H: Travel Bag ......................................................................................................... 1

I: Screws ................................................................................................................8

J: Hex Wrench .......................................................................................................2

K: Magnetic Leveller .............................................................................................1

A B C D E G H

Assemble Standing Poles

1. Screw foot (E) to bottom vertical pole (B) and

tighten with hex wrench (J).

2. Connect top and bottom vertical poles via

keyhole. Twist 180 degrees or until you feel

the connection lock.

3. Repeat on other standing pole.

Attach Horizontal Bars

1. Install both horizontal bars to the top of the

unit, leaving space between to attach the

TV mount later in the assembly. Insert metal

tabs into the channel of the vertical pole,

then use the hex wrench to expand locking

mechanism.

2. Repeat on other side, making sure bars are

level using magnetic leveller.

3. Add stabilizer bar (D) to bottom of unit.

Insert Fabric Banner

1. Insert plastic seals of fabric banner (F) into

the front-facing channels of the standing

poles.

2. Evenly pull banner through channels to

bottom of the unit.

NOTE: It is recommended to install the fabric

banner before the horizontal bars for easier

assembly.

If you have any questions regarding our products, please visit us at www.displays2go.com

or contact Displays2go customer service at 844-221-3388.

Attach TV Mount

1. Screw TV mount (G) to black holes of

horizontal bars.

2. Follow enclosed TV mount instructions to

attach mounting bracket to your screen.

3. Lift and carefully attach screen to TV mount.

Check that TV is securely installed before

releasing.

Assembly is complete.

Displays2go BKDNTVSTCP Assembly Instructions

Displays2go BKDNTVSTCP Assembly Instructions

Displays2go BKDNTVSTCP Assembly Instructions

Related papers

Other documents