Four-Faith F2164 User manual

Brand: Four-Faith

Model: F2164

Type: User manual

F2X64(RTU) Series

User Manual

Documentation No.

Product Version

Page

Product Name：

Total:

F2X64(RTU) Series User Manual

The user manual is suitable for the following model:

Model

Product Type

F2164

GPRS RTU

F2264

CDMA RTU

Xiamen Four-Faith Communication Technology Co., Ltd.

Add：J1-J3,3rd Floor,No.44,GuanRi Road,SoftWare

Park,XiaMen,China Zip Code:361008

Tel：+86 592-6300326 ，6300325，6300324

Fax:+86 592-5912735

http://www.fourfaith.com

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 2 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Files Revised Record

Date

Version

Remark

Author

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 3 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

All contents in the files are protected by copyright law, and all copyrights are reserved by Xiamen

Four-Faith Communication Technology Co., Ltd. Without written permission, all commercial

use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc.,

but non-commercial purpose, downloaded or printed by individual (all files shall be not revised,

and the copyright and other proprietorship notice shall be reserved) are welcome.

Trademark Notice

Four-Faith、四信、、、 are all registered trademarks of Xiamen

Four-Faith Communication Technology Co., Ltd., illegal use of the name of Four-Faith,

trademarks and other marks of Four-Faith is forbidden, unless written permission is authorized in

advance.

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 4 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 5 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Contents

Contents ............................................................................................................................................ 5

Chapter 1 Brief Introduction of Product ......................................................................................... 11

1.1 General .............................................................................................................................. 11

1.2 Features and Benefits ........................................................................................................ 11

1.3 Working Principle ............................................................................................................. 12

1.4 Specifications .................................................................................................................... 14

Chapter 2 Installation Introduction ................................................................................................. 16

2.1 General .............................................................................................................................. 16

2.2 Encasement List ................................................................................................................ 16

2.3 Installation and Cable Connection .................................................................................... 16

2.4 Power ................................................................................................................................ 21

2.5 Indicator Lights Introduction ............................................................................................ 21

Chapter 3 RTU Function Introduction ......................................................................................... 22

3.1 Multiple servers funticon .................................................................................................. 22

3.2 MODBUS protocol ........................................................................................................... 22

3.2.1 MODBUS settings ................................................................................................. 22

3.2.2 TCP2COM description ........................................................................................... 23

3.2.3 MODBUS digital IO input introduction ................................................................. 23

3.2.4 MODBUS digital IO output introduction ............................................................... 24

3.2.5 MODBUS counter introduction ............................................................................. 24

3.2.6 MODBUS analog input introduction ..................................................................... 26

3.3 RTU extended protocol ..................................................................................................... 27

3.4 Alarm funtion .......................................................................................................... 28

3.5 Multiply configure parameters ................................................................................ 28

3.6 Remotely upgrade ..................................................................................................... 28

Chapter 4 Configuration .................................................................................................................. 29

4.1 RS232/RS485 Configuration ............................................................................................ 29

4.1.1 Configuration introduction ..................................................................................... 29

4.1.2 Run the configure tool ............................................................................................ 30

4.1.3 Re-power RTU ....................................................................................................... 31

4.1.4 Configuration ......................................................................................................... 32

4.1.4.1 Digital channel settings ............................................................................... 32

◆ Digital input function ................................................................................ 32

◆ MODBUS function ................................................................................... 33

◆ MODBUS logic 1 corresponding function ................ 错误！未定义书签。

◆ MODBUS logic 0 corresponding function ................ 错误！未定义书签。

◆ Acquisition function .................................................................................. 33

◆ Acquisition interval ................................................................................... 33

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 6 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

◆ Alarm function .......................................................................................... 33

◆ Alarm trigger condition ............................................................................. 34

◆ Alarm content ............................................................................................ 34

◆ Alarm phone number ................................................................................. 34

◆ Active report function ............................................................................... 35

4.1.4.2 Optocoupler and relay settings .................................................................... 36

◆ Digital output function .............................................................................. 36

◆ MODBUS logic 1 output........................................................................... 36

◆ MODBUS logic 0 output........................................................................... 37

◆ MODBUS logic 1 square-wave cycle ....................................................... 37

◆ MODBUS logic 0 square-wave cycle ....................................................... 37

◆ Default output voltage ............................................................................... 38

4.1.4.3 Analog channel settings ............................................................................... 39

◆ Analog input function................................................................................ 39

◆ Set sensor range ......................................................................................... 39

◆ Set sensor voltage or current output .......................................................... 41

◆ MODBUS function ................................................................................... 42

◆ Acqisition function .................................................................................... 42

◆ Acqisition interval ..................................................................................... 42

◆ Alarm function .......................................................................................... 42

◆ Alarm trigger condition ............................................................................. 43

◆ Alarm content ............................................................................................ 43

◆ Alarm phone number ................................................................................. 43

◆ Active report function ............................................................................... 44

.4.1.4.4 RTU counter、report、Alarm settings ................................................... 45

◆ Counter function ........................................................................................ 45

◆ Counter work mode ................................................................................... 45

◆ Counter initial value .................................................................................. 46

◆ Alarm function .......................................................................................... 46

◆ Alarm content ............................................................................................ 46

◆ Alarm phone number ................................................................................. 46

◆ Alarm upper limit ...................................................................................... 47

◆ Active report function ............................................................................... 47

◆ Active report interval ................................................................................ 48

◆ Alarm upload style .................................................................................... 48

◆ Continuous alarm interval ......................................................................... 48

◆ Alarm administrator number ..................................................................... 49

4.1.4.5 ModBus Setting ........................................................................................... 49

◆ ModBus work mode .................................................................................. 50

◆ ModBus address ........................................................................................ 50

◆ RTU work mode ........................................................................................ 51

4.1.4.6 Data Service Center Settings ....................................................................... 52

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 7 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

◆Data Center Number.................................................................................... 52

◆Main Center Addr+Port: .............................................................................. 53

◆Backup Center Addr+Port: .......................................................................... 53

◆Multi DSC Configuration ............................................................................ 54

◆Main and Backup Center DNS Server ........................................................ 55

◆Center 2~5 DNS Server ............................................................................... 55

4.1.4.7 device Settings ............................................................................................ 56

◆ Work Mode ................................................................................................ 56

◆ Trigger Type .............................................................................................. 57

◆ Disconnect to Trigger mode ...................................................................... 58

◆ Debug Level .............................................................................................. 58

◆ Databit, Parity, Stopbit .............................................................................. 58

◆ Communication Baudrate .......................................................................... 59

◆ Offline detect interval ................................................................................ 59

◆ Auto Back To Main Server ........................................................................ 59

◆ Device ID .................................................................................................. 60

◆ SIM Card No ............................................................................................. 60

◆ Bytes Interval ............................................................................................ 60

◆ Custom Register String ............................................................................. 61

◆ Custom Heartbeat String ........................................................................... 61

◆ Reconnect setting ...................................................................................... 61

◆ Transfer meanning ..................................................................................... 62

4.1.4.8 Other Settings .............................................................................................. 63

◆ Network ..................................................................................................... 63

◆ SMS Center ............................................................................................... 64

◆ Heartbeat Interval ...................................................................................... 64

◆ Call Trigger Phone No............................................................................... 65

◆ SMS Trigger Password .............................................................................. 65

◆ Data Trigger Password .............................................................................. 65

◆ TCP MTU .................................................................................................. 66

◆ Multi Center Reconnect Interval ............................................................... 66

◆ Set parameter of configure SMS ............................................................... 66

4.1.4.9 Scheduled Power ON/OFF Setting.......................................................... 67

◆ RTC(Real Time Clock) Time Setting ........................................................ 67

◆ Power On/Off Setting ................................................................................ 68

4.1.4.10 SMS Setting .............................................................................................. 77

◆ Destination number ................................................................................... 77

◆ SMS Sending Format ................................................................................ 78

◆ Data upload Style ...................................................................................... 78

4.1.4.11 Functions ................................................................................................... 79

◆ Show Configure ........................................................................................ 79

◆ Show Baudrate .......................................................................................... 79

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 8 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

◆ Auto Detect ............................................................................................... 79

◆ Version Display ......................................................................................... 79

◆ Signal Value............................................................................................... 79

◆ Factory setting ........................................................................................... 80

◆ Clear Output .............................................................................................. 80

◆ Save Output ............................................................................................... 80

◆ Browse ...................................................................................................... 80

◆ Save Configure .......................................................................................... 80

◆ Load Configure ......................................................................................... 80

4.1.5 Work State Switch .................................................................................................. 81

4.2 Setting by SMS ................................................................................................................. 81

4.2.1 Setting by AT command of SMS ............................................................................ 81

4.2.2 Setting by simple command of SMS ...................................................................... 82

4.2.2.1 Format description ...................................................................................... 82

4.2.2.2 Overall setting by SMS ............................................................................... 82

◆ Query overall command ............................................................................ 82

◆ Query setting command ............................................................................ 83

◆ setting remote upgrade .............................................................................. 83

4.2.2.3 Data Service Center Settings(S1 series) ...................................................... 84

◆ Data Center Number.................................................................................. 84

◆ Main Center Addr+Port: ............................................................................ 84

◆ Backup Center Addr+Port: ........................................................................ 85

◆ Multi DSC Configuration .......................................................................... 85

◆ Main and Backup Center DNS Server ...................................................... 86

◆ Center 2~5 DNS Server ............................................................................. 87

4.2.2.4 device Settings(S2 series) ............................................................................ 87

◆ WorkMode ................................................................................................. 87

◆ Trigger Type .............................................................................................. 88

◆ Disconnect to Trigger mode ...................................................................... 88

◆ Offline detect interval ................................................................................ 88

◆ Debug Level .............................................................................................. 89

◆ Device ID .................................................................................................. 89

◆ SIM Card No ............................................................................................. 90

4.2.2.5 Other Settings(S3 series) ............................................................................. 90

◆ Network ..................................................................................................... 90

◆ Heartbeat Interval ...................................................................................... 91

4.2.5.6 SMS Setting(S4 series)................................................................................ 91

◆ Set parameter of configure SMS ............................................................... 91

◆ Destination number ................................................................................... 92

◆ SMS Sending Format ................................................................................ 92

◆ Data upload Style ...................................................................................... 93

4.2.5.7 Functions(S5 series) .................................................................................... 93

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 9 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

◆ Restart ....................................................................................................... 93

◆ Factory setting ........................................................................................... 93

◆ RTC(Real Time Clock) Time Setting ........................................................ 93

4.2.5.8 ModBus Setting(S5 series) .......................................................................... 94

◆ ModBus work mode .................................................................................. 94

◆ ModBus address ........................................................................................ 94

4.2.5.9 report and alarm settings(S5 series) ............................................................ 95

◆ Active report function ............................................................................... 95

◆ Active report interval ................................................................................ 95

◆ Alarm upload style .................................................................................... 95

◆ Continuous alarm interval ......................................................................... 96

◆ Alarm administrator number ..................................................................... 96

4.2.5.10 Digital channel settings(S6 series) ............................................................ 97

◆ Digital input function ................................................................................ 97

◆ MODBUS function ................................................................................... 97

◆ MODBUS logic 1 corresponding function ................ 错误！未定义书签。

◆ MODBUS logic 0 corresponding function ................ 错误！未定义书签。

◆ Acquisition function .................................................................................. 98

◆ Acqisition interval ..................................................................................... 98

◆ Alarm function .......................................................................................... 98

◆ Alarm trigger condition ............................................................................. 99

◆ Alarm content ............................................................................................ 99

◆ Alarm phone number ................................................................................. 99

◆ Active report function ............................................................................. 100

◆ Digital output function ............................................................................ 101

◆ MODBUS logic 1 output......................................................................... 101

◆ MODBUS logic 0 output......................................................................... 102

◆ MODBUS logic 1 square-wave cycle ..................................................... 102

◆ MODBUS logic 0 square-wave cycle ..................................................... 102

◆ Default output voltage ............................................................................. 103

4.2.5.12 Analog channel settings(S8 series) .......................................................... 103

◆ Analog input function.............................................................................. 103

◆ Set sensor range ....................................................................................... 104

◆ Set sensor voltage or current output ........................................................ 105

◆ MODBUS function ................................................................................. 106

◆ Acqisition function .................................................................................. 106

◆ Acqisition interval ................................................................................... 107

◆ Alarm function ........................................................................................ 107

◆ Alarm trigger condition ........................................................................... 108

◆ Alarm content .......................................................................................... 108

◆ Alarm phone number ............................................................................... 109

◆ Active report function ............................................................................. 109

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 10 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

4.2.5.13 Counter settings(S9 series) ...................................................................... 110

◆ Counter function ...................................................................................... 110

◆ Counter work mode ................................................................................. 110

◆ Counter initial value ................................................................................ 111

◆ Alarm function ........................................................................................ 111

◆ Alarm content .......................................................................................... 111

◆ Alarm phone number ............................................................................... 112

◆ Alarm upper limit .................................................................................... 112

4.3 Setting by RTU extended protocol .................................................................................. 113

Chapter 5 Software Manual .......................................................................................................... 114

5.1 TCP2COM manual.......................................................................................................... 114

5.1.1 Open software ...................................................................................................... 114

5.1.2 Install the driver ................................................................................................... 115

5.1.3 Add virtual serial port ........................................................................................... 116

5.1.4 Setting the server parameters ............................................................................... 118

5.1.5 Server connection state ........................................................................................ 119

5.1.6 Monitor................................................................................................................. 120

5.1.7 Not transmited data query .................................................................................... 121

5.1.8 Delete database data ............................................................................................. 122

5.1.9 Quit....................................................................................................................... 123

5.2 RTU center service .......................................................................................................... 123

5.2.1 Open software ...................................................................................................... 123

5.2.2 Service setting ...................................................................................................... 124

5.2.3 Start equipment and connect ................................................................................ 124

5.2.4 View the acquisition data ..................................................................................... 125

5.2.5 Send data to RS232/RS485 .................................................................................. 125

5.2.6 Control optocoupler and relay .............................................................................. 126

5.2.7 Alarm information ................................................................................................ 126

5.2.8 Center service information ................................................................................... 126

5.2.9 Query data ............................................................................................................ 127

5.2.10 Remote configure ............................................................................................... 128

5.2.11 Upgrade .............................................................................................................. 128

5.2.12 Reset device ....................................................................................................... 129

Appendix ....................................................................................................................................... 131

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 11 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Chapter 1 Brief Introduction of Product

1.1 General

F2x64 series is wireless Remote Terminal Unit(abbreviation: RTU). It has multiple functions

(analog input、digital input、digital output、pulse counting and wireless data communication, etc).

It adopts high-powered industrial 32 bits MCU and embedded real time operating system. It

supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect

devices to a cellular network, Easy to make your existing devices connect to network just with

basic configurations. It has low power consumption work mode in which the power consumption

could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse

counter and pulse wave output functions.

It has been widely used in M2M fields, such as intelligent transportation, smart grid, industrial

automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so

on.

1.2 Features and Benefits

Design for Industrial Application

 High-powered industrial cellular module

 High-powered industrial 32 bits MCU

 Support low power consumption mode, including multi-sleep and trigger modes to reduce the

power dissipation farthest

 Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function

 Housing: iron, providing IP30 protection.

 Power range: DC 5~35V

Stability and Reliability

 Support hardware and software WDT

 Support auto recovery mechanism, including online detection, auto redial when offline to

make it always online

 RS232/RS485/RS422 port: 15KV ESD protection

 SIM/UIM port: 15KV ESD protection

 Power port: reverse-voltage and overvoltage protection

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 12 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

 Antenna port: lightning protection(optional)

Standard and Convenient

 Adopt terminal block interface, convenient for industrial applications

 Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly

 TTL logic level RS232 interface can be customized

 Support intellectual mode, enter into communication state automatically when powered on

 Provide management software for remote management

 Support several work modes

 Convenient configuration and maintenance interface

High-performance

 8 analog input channels（resolution：16bit）Input voltage（0-5V）,Input current（0-20mA）,

Sampling rate(1.365kSPS).

 4 relay outputs（5A/30VDC,5A/250VAC）.

 4 optocoupler isolated digital outputs（10mA）.

 8 digital inputs（Voltage range：3.3V-24V）. one of these input ports can be configured as

pulse counter function.

 2MB SPI FLASH for data log.

 Support dual data centers, one main and another as backup

 Support multiple data centers , it can support maximum 5 data centers

 Support multi-center multi-function(for example: one data center is MODBUS RTU protocol

function, another data center is RTU extended protocol function)

 Support multiple online trigger ways, including SMS, ring and data. Support link

disconnection when timeout

 Support dynamic domain name(DDNS) and IP access to the data center

 Support RS232/RS485 MODBUS RTU protocol.

 Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to

virtual serial port.

 Support 8 digital inputs and 8 analog input manual query and automatic report.

 Support 4 optocoupler isolated output ports and 4 relay outputs controlled via MODBUS

RTU protocol.

 Support pulse counter initiate value configurable, Its realtime value can be queried via

MODBUS RTU protocol

 Support RTU extended protocol.

 Acquisition data(8 analog inputs and 8 digital inputs) is reported periodically via RTU

extended RTU protocal.

 Support RTU extended protocol. Reporting mode can be selected. there are three reporting

mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when

network connect fail)

 Support RTU extended protocol.When reporting acquisition data failure, acquisition data are

saved to 2M byte SPI FALSH.

 Support RTU extended protocol. The data center can query acquisition data actively

 Support RTU extended protocol. It has counter function that the initial value of the timer is

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 13 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

set and the value of the timer is queried

 Support RTU extended protocol. It has the data center and RS232/RS485 transparent

transmission function.

 Support RTU extended protocol. it has alarm function, alarm information is reported

automatically(alarm trigger conditions can be configured independently).

 Support RTU extended protocol. Can remotely reboot RTU

 Support RTU extended protocol. Can remotely configure the parameters

 Support RTU extended protocol. The remote upgrading parameters can be configured, RTU

support remote upgrade firmware.

 Alarm function: Alarm information are reported through RTU extended protocol , SMS, or

both SMS and RTU extended protocol

 When alarm information are reported through SMS, alarm number and alarm content of each

channel can be configured independently

 The remote upgrading parameters can be configured by SMS. RTU upgrade the firmware

immediately when it received the upgrade command.

 Built-in industrial clock, the acquisition time can be recorded through this clock

 Network is automatically connected, when device power on. Network is automatically

reconnected when network is offline.

 Scheduled turn on and turn off power function make the device work in low-power mode

1.3 Working Principle

The principle chart of the RTU is as following:

Cellular

Module

MCU

Antenna

SIM/UIM

Interface

Indicator

Lights

SRAM&

FLASH

WDT Module

RTC Module

User Interface

RS232/RS485/RS422

Module

Power Module

8 digital input

ports

8 analog input

channels

4 relay

out

4 digital

output ports

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 14 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

1.4 Specifications

Cellular Specification

Standard and Band

Bandwidth

TX power

sensitivity

F2164 GPRS RTU

EGSM900/GSM1800MHz,

GSM850/900/1800/1900MHz(optional)

Compliant to GSM phase 2/2+

GPRS class 10, class 12(optional)

85.6Kbps

GSM850/900：

<33dBm

GSM1800/1900：

<30dBm

<-107

dBm

F2264 CDMA RTU

CDMA2000 1xRTT 800MHz

800/1900MHz(optional)

450MHz(optional)

153.6Kbps

<30dBm

<-104

dBm

Hardware System

Item

Content

MCU

Industrial 32 bits CPU

FLASH

2MB（Extendable 8MB）

SRAM

512KB（Extendable 1MB）

Interface Type

Item

Content

Serial

1 RS232 port and 1 RS485port, 15KV ESD protection

Data bits: 5, 6 ,7, 8

Stop bits: 1, 1.5, 2

Parity: none, even, odd, space, mark

Baud rate: 110~230400 bps

Indicator

"Power", "ACT", "Online"

Antenna

Cellular: Standard SMA female interface, 50 ohm

GPS: Standard SMA female interface, 50 ohm

lighting protection(optional)

SIM/UIM

Standard 3V/1.8V user card interface, 15KV ESD protection

Power

Terminal block interface, reverse-voltage and overvoltage

protection

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 15 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Power Input

Item

Content

Standard Power

DC 12V/0.5A

Power Range

DC 5~35V

Power Consumption

Working States

Power Consumption

Communication

60mA@12VDC；118mA@5VDC

Standby

39mA@12VDC；73mA@5VDC

Timing Power

Off

1.1mA@12VDC；1.1mA@5VDC

Physical Characteristics

Item

Content

Housing

Iron, providing IP30 protection

Dimensions

157x97x25 mm

Weight

500g

Environmental Limits

Item

Content

Operating

Temperature

-25~+65ºC （-13~+149℉）

Extended

Operating

Temperature

-30~+75ºC （-22~+167℉）

Storage

Temperature

-40~+85ºC（-40~+185℉）

Operating

Humidity

95% ( Non-condensing)

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 16 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Chapter 2 Installation Introduction

2.1 General

The RTU must be installed correctly to make it work properly.

Warning: Forbidden to install the RTU when powered on!

2.2 Encasement List

Name

Quantity

Remark

RTU host

Cellular Antenna

Power adapter

RS232 data cable

optional

Terminal Block

5 pin

7 pin

8 pin

9 pin

RS485 data cable

optional

Manual CD

Certification card

Maintenance card

Table 2-1 Encasement List

2.3 Installation and Cable Connection

Dimension: (unit: mm)

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 17 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Figure 2-1 Installation Chart

Installation of SIM/UIM card:

Firstly power off the RTU, and press the out button of the SIM/UIM card outlet with a needle

object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into the card

sheath (Pay attention to put the side which has metal point outside), and insert card sheath back to

the SIM/UIM card outlet.

Warning: Forbidden to install SIM/UIM card when powered on!

Installation of antenna:

Screw the SMA male pin of the antenna to the female SMA outlet of the RTU tightly.

Warning: The antenna must be screwed tightly, or the signal quality of antenna will be influenced!

User Interface Signal Definition

Number

Function

Interface

Default function

Function expansion

Power

PWR

Power input positive

None

GND

Power input negative

None

RS232

G/232

RS232 GND

None

RXD

RS232 Data receiving

None

TXD

RS232 Date sending

None

RS485

RS485 positive

Reserved for compatible

RS232 DTR

RS485 negative

Reserved for compatible

RS232 DSR

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 18 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Digital

Input

DI1/C

Digital input1

Counting function

DI2

Digital input 2

None

DI3

Digital input 3

None

DI4

Digital input 4

None

DI5

Digital input 5

None

Digital

Input

DI6

Digital input 6

None

DI7

Digital input 7

None

DI8

Digital input 8

None

DIG

Digital input GND

None

Optocoupl

er output

DO1

Optocoupler output1

None

DO2

Optocoupler output 2

None

DO3

Optocoupler output 3

None

DO4

Optocoupler output 4

None

COM

COM GND

None

Relay

output

K1-

Relay output 1-

None

K1+

Relay output 1+

None

K2-

Relay output 2-

None

K2+

Relay output 2+

None

K3-

Relay output 3-

None

K3+

Relay output 3+

None

K4-

Relay output 4-

None

K4+

Relay output 4+

None

ADC

ADC1

None

ADC 2

None

ADC 3

None

ADC 4

None

ADC 5

None

ADC 6

None

ADC 7

None

ADC 8

None

AGND

None

Installation of cable:

F2X64 adopts industrial terminal block interface. The recommendatory cable is 28-16AWG.

The detail description of standard layout adapter and communication cables as following:

Adapter（Rating Output 12VDC/0.5A）：

Cable Color

Power Output Polarity

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 19 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Black &White Alternate

Anode

Black

Cathode

RS232 Cable：

Cable Color

Corresponding DB9-M Pin Number

Brown

Pin 2

Blue

Pin 3

Black

Pin 5

RS485 Cable：

Cable Color

Signal definition

Red

RS485(A)

Black

RS485(B)

Power adapter and communication cable connection chart as following:

Digital Input cable connection

F2X64(RTU) Series User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd. Page 20 of 133

Add： J1-J3,3rdFloor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735

Optocoupler output cable connection

Relay output cable connection

ADC cable connection

Page is loading ...

Four-Faith F2164 User manual

Four-Faith F2164 User manual

Four-Faith F2164 User manual

Related papers

Other documents