Page is loading ...
INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future reference.
DIGITAL TRAIL CAMERA
WITH SENSOR
UX1080WLC
General Safety 4
The Basics 5
Installing Batteries 6
Memory card 7
How to use
Under Test Mode 8
Under Power Mode 9
Specifications 13
Support Last Page
CONTENTS
4
Read this manual thoroughly before you start using the Action Camera.
Store this manual, the completed warranty card, your receipt and the
product packaging. The safety precautions instructions reduces the risk of
fire, electric shock and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
GENERAL SAFETY
WARNING:
Use caution when using you Action Camera as part of your active lifestyle.
Always be aware of your surroundings to avoid injury to yourself and
others.
Abide by all local laws when using your Action Camera and related
mounts and accessories, including all privacy laws, which may restrict
recording in certain areas.
CAUTION:
• Danger of explosion if the battery is incorrectly replaced.
• Replace only the same or equivalent type.
• Incorrect usage of batteries may result in battery leakage, overheating,
or explosion.
Released battery fluid is corrosive and can be toxic. It can cause skin
and eye burns, and is very harmful if swallowed.
To reduce the risk of injury:
• Keep batteries out of reach of children.
• Do not heat, open, or dispose of battery pack in fire.
• Do not allow metal objects to touch the battery on the device.
• Do not expose battery pack to excessive heat.
5
THE BASICS
6
IF USING AA ALKALINE BATTERIES
INSTALLING BATTERIES
1. Press EJECT for the
battery compartment
to come out.
2. Insert the AA batteries
accordingly as
indicated by the
positive and negative
battery icons.
3. Slide battery
compartment back into
the bottom of the unit
until it clicks into place.
NOTE: Installaing any 8xAA
batteries in the wrong
direction may cause the
batteries to leak and possibly
explode, causing the camera
to fail and damage the
battery compartment.
7
INSTALLING MICRO SD CARD
MEMORY CARD INSTALL
1. Insert the Micro SD
Card (max 64GB) with
the contacts facing
away. The Micro SD card
should slide in freely
with little resistance.
Continue pressing the
card inward until you
hear a click. This means
the Micro SD card is
lcoked in place and
ready for use.
2. To remove Micro SD
card, Press the card
inwards to release.
CAUTION: We recommend
class 6 or above high speed
memory card. As using
anything less may cause
damage to pictures and
videos.
8
POWER ON TEST MODE
Slide power Switch from OFF to TEST, LED Screen will power on.
DO NOT slide it directly to ON.
UNDER TEST MODE
(for reviewing and checking files)
- Press the MENU button to launch the system menu or exit.
- Press SHUTTER to manually trigger the shutter. A photo
or video (depending on the mode) will be taken and saved to
the memory card.
The unit has 5 functions, Left, Right, Up, Down and OK buttons.
- Press RIGHT to review photo or video, UP/DOWN to browse
pictures and videos.
- Press LEFT to start and stop video, Press SHUTTER to exit.
HOW TO USE
9
POWER ON MODE
Slide power Switch from OFF to ON, LED Screen will power on.
This mode the screen will power OFF and the camera will work
automatically.
This will capture if any motions are detected by PIR Sensor.
UNDER ON MODE
(For automatically capturing video/photos of motions)
Go back to test mode once you are ready to review captured files.
HOW TO USE
IMPORANT INFORMATION
Before proceeding with any video recording or image capturing, you must
have an SD card (NOT SUPPLIED) inserted into the SD card slot for your files
to be storage. Without doing so, you cannot recording or take any photos as
the device has no internal storage.
10
SPECIFICATIONS
Photo Resolution Up to 36 Megapixels
Video Resolutions VGA / 480p / 720p / 1080p / 1520p
Detection Angle Up to 120°
Detection Distance Up to 25 Metres
Fill Light LED
Wavelength 940nm (no glow)
Fill Light LED
Quantity 44pcs
Trigger Time 0.3 seconds
Waterproof IP65
Working
Temperature -20°C to 71°C
Memory Card Micro SD Card (max 64GB)
Power Supply 8 x AA Batteries
Standby Time Up to 6 Months
Photo Format JPEG
Video Format AVI
Size Up to 2 Hours
Dimensions 65 (w) x 85 (d) x 155 (h) mm
11
CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
/
