TBS-19622-TNNWU MADE IN MALAYSIAPage 1 of 2
DR23667 / DP53667 / DB53667
DR23667-01/
DP53667-01
DR23667-13/
DP53667-13
DR23667-07/
DP53667-07
DR23667-07/
DP53667-07
DR23667-13/
DP53667-13
Legs
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
Flat Washer
Lock Washer
1 pce
Hex Nut
Wrench
8 pcs
8 pcs
8 pcs
PART NO FIGURE DESCRIPTION QTY
Table Top 1 pce
4 pcs
1
2
3
4
Hardware Bag 1 pce
PART NO FIGURE DESCRIPTION QTY
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or more people are needed for assembly
2 please keep all hardware parts out of the reach of children.
WINNERS ONLY
TBS-19622-TNNWU
DR23667 / DP53667 / DB53667
MADE IN MALAYSIA
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
1.Turn Table Top upside down on a soft protective surface such as a carpet. Insert Table Legs into Table Top using the
provided hardware as shown on Fig1. Remove and discard the temporary cleats.
ASSEMBLY :
STEP 1
STEP 3
Assembly is now Completed.
WINNERS ONLY
Fig1.
Hex Nut
Flat
Washer
Lock
Washer
Wrench
2.1-Unlock the hook lock from underneath the table top and pull the table from both ends.
2.2-Lift both leaves from the compartment.
2.3-Flip up the aprons and unfold leaf and place the leaf on the Table Top surface carefully.
STEP 2
3.1-Push Table Top from both ends to close.Lock the hooks underneath the table.
Unlock Hook
Lock Hook
R
E
M
O
V
E
R
E
M
O
V
E
R
E
M
O
V
E
R
E
M
O
V
E
IMPORTANT:
Must remove all 4 cleats.
/
