TFS-16496-TNNWU MADE IN MALAYSIA
Page 1 of 2
DF53247W / DF53247F / DP53247 / DB53247
DF53247W-01/
DF53247F-01
DP53247-01
DB53247-01
DF53247W-13/
DF53247F-13
DP53247-13
DB53247-13
DF53247W-13/
DF53247F-13
DP53247-13
DB53247-13
DF53247W-07/
DF53247F-07
DP53247-07
DB53247-07
DF53247W-07/
DF53247F-07
DP53247-07
DB53247-07
Legs
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
Flat Washer
Lock Washer
1 pce
Hex Bolt
Wrench
8 pcs
8 pcs
8 pcs
PART NO FIGURE DESCRIPTION QTY
Table Top 1 pce
4 pcs
1
2
3
4
Hardware Bag 1 pce
PART NO FIGURE DESCRIPTION QTY
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
WINNERS ONLY
PAGE 1 OF 2 MADE IN MALAYSIA
ARS-95063-SHNWU2
Right Leg Assembly
Chair Back
Left Leg Assembly
Center Stretcher
Wood Plugs
DF519SF-01
DF519SW-01
DP51959S-01
DB519S-01
DF519SF-02
DF519SW-02
DP51959S-02
DB519S-02
DF519SF-05
DF519SW-05
DP51959S-05
DB519S-05
DF519SF-06
DF519SW-06
DP51959S-06
DB519S-06
DF519SF-11
DF519SW-11
DP51959S-11
DB519S-11
DF519SF-14
DF519SW-14
DP51959S-14
DB519S-14
DF519SF-02
DF519SW-02
DP51959S-02
DB519S-02
DF519SF-05
DF519SW-05
DP51959S-05
DB519S-06 DF519SF-06
DF519SW-06
DP51959S-06
DB519S-06
DF519SF-11
DF519SW-11
DP51959S-11
DB519S-02
DF519SF/DF519SW/DP519S/DB519S
ARROW BACK SIDE CHAIR
PART NO
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST :
HARDWARE LIST :
Flat Washer
Allen Key
JRN Nut
Wood Plug
Lock Washer
4pcs
4pcs
JCBC Bolt 10 pcs
6pcs
6pcs
1pce
FIGURE DESCRIPTION QTY
1 pce
1 pce
2 pcs
4 pcs
1 pce
1
2
3
4
5
6
Hardware Bag 1 pce
PART NO FIGURE DESCRIPTION QTY
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
WINNERS ONLY
Caution: Please read instruction thoroughly before unpacking assembly parts. Sharp exposed staple tips
can cause injury, therefore, for your protection, please remove any exposed staples used in packing.
Please keep all hardware parts out of reach of children.
1.We recommend that you should assemble this product with the assistance of another person;
this will make assembly easier, and will help to eliminate damage to the product or injury to
persons during assembly.
2.Be sure to check all packing materials carefully for small parts that may have come loose inside
the carton during shipment.
3.Please do not over tighten screws or bolts. Reminder
1.use only the hardware supplied.
2.Do not over-tighten the bolts.
3.This item may require periodic tightening.
TFS-16496-TNNWU
DF53247W / DF53247F / DP53247 / DB53247
MADE IN MALAYSIAPage 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
ASSEMBLY :
STEP 1
STEP 2
Assembly is now Completed.
WINNERS ONLY
Fig.1
Flat
Washer
Lock
Washer Hex Bolt
Wrench
2.1- Turn table to uprigtht position.
2.2- Once table is fully balance fully tighten all bolts.
1.1-Turn the Table Top upside down on a soft protective surface such as carpet or other soft material.
1.2- Attach the Table leg to the corner of the apron using the provided hardware as shown in Fig 1.
1.3- Repeat Step1.2 for the 3 remaining Table legs.
/