CONGRATULATIONS
CongratulationsonyourchoiceofawatchbyUNION
GLASHÜTTE/SA.® - a German brand among the most
renowned and with the richest traditions.
Thisexceptionallydesigned,undeniablyattractivetimepiece
alsohasasuperiordesignquality.Usingonlythehighestvalue
materialsandcomponents,yourUNIONGLASHÜTTE/SA.®
watchisprotectedagainstshocks,temperaturevariations,
water and dust.
Itssapphirecrystalhasadoublesidedanti-reflectivecoat-
ing,anditisdrivenbyamechanicalmovementchronograph
U7750withautomaticwindinganddayanddateindicator.
Toensureperfectandaccuraterunningformanyyearsto
come,werecommendyouattentivelyfollowtheadvicegiven
in these instructions.
We hopeyouwill beverypleasedwithyourUNION
GLASHÜTTE/SA.® timepiece !
USE
Winding
Crown in position I, not pulled out
Manualwindingisnecessaryifyouhavenotwornyourwatch
forsomeconsiderableperiodoftime.Torestartit,youonly
needtoturnthecrownafewtimes(clockwise),ortotilt
yourwatchfromsidetosideafewtimes.Torestoreyour
watch's46hourpowerreserve,around32turnsofthe
crown(forward)arerequired.
Whenwearingyourwatch,theautomaticdevicewindsit
everytimeyoumoveyourwrist.
Notes
Theaccuracymaybeinfluencedbythewearingconditions.
Thereisnostopofthecrownatfullwinding.
Setting the time
Crown in position III, pulled out
PullthecrownouttopositionIIIcarefully;theseconds
hand (3)willstop.Turnthecrownforwardsorbackwardsto
set the desired time.
Oncethehourhandpassesthe12o'clockposition,youcan
seeifitisindicatingmidnight(dateanddaywillchange)or
midday (date and day will not change).
Advice on how to synchronise your watch
To synchronise the seconds hand (3)withanofficialtime
signal(radio/TV/Internet),pulloutthecrowntopositionIII;
thesecondshandwillstop.Atthesignal,pushthecrownback
into the rest position I.
Day and date correction
Crown in position II, intermediate
PullthecrownouttopositionII,turnitforwardstosetthe
date or backwards to set the desired day and then push
it back into the rest position I. During this operation, your
watch will continue running, so the time will not need to be
re-set.
Important
Never correct the date and/or day between 8 p.m. and 2 a.m.;
the movement is changing the date and the day.
Chronograph function
PresstheStart/Stoppush-button(9) to start the chrono-
graph.PresstheStart/Stoppush-button(9) again to stop
it.ThechronographwillresumeiftheStart/Stoppush-
button (9) is pressed again (added times), or the three
chronograph hands (5, 6 and 7)willreturntozeroifpush-
button (10) is pressed.
www.union-glashuette.com U-7750_EN/2013
U-7750