NOYAFA NF-514 User manual

Brand
NOYAFA
Model
NF-514
Type
User manual
Building Electronic Thermometer
02
NF-514
VER: V1
User Manual
建筑电⼦测温仪
36.8
Switch Backlight
Lighting
Temperature range
Measurement Error
Environment Temperature
Shenzhen Noyafa Electronic Co., Ltd
1、Overview
The instrument is Portable Building Electronic Thermometer is a
pr of es si o n a l tem p era tu re m eas u ri ng i ns tr um en t de v el op ed
acco rdin g to the construction characteristics of my country's
construction industry and relevant technical specifications. It can
displaythemeasuredtemperatureintuitively,accuratelyandquickly,
with good reliability, wide range of use and applications. Warm
operating environment, small size and light weight, easy to carry,
suitable for construction sites and field operations; mainly used for
const ruction, bu ildin g materials, water conservancy, electric power,
metallurgy, petrochemical, ports, roads and bridges, municipal and
otherbasicconstructionprojects.
2、ScopeOfApplication
The instrument is suitable for on-site construction temperature
measurement of various construction projects. It can be used with
temperature measurement probes to measure the temperature of
materialsandclinker,suchas:gas,liquid,fluid,mixtureandgranular
materials; and embedded temperature measurement line. It can be
used to measure the internal temperature of winter construction
concreteandmassconcrete.
3、Thecompositionandfunctionoftheinstrument
建筑电⼦测温仪
NF-514
36.8
Switch Backlight
Lighting
Temperature range
Measurement Error
Environment Temperature
Shenzhen Noyafa Electronic Co., Ltd
LCD
Power Switch
Power Switch
Backlight Switch
Temperature Probe
Temperatureprobe
Thetemperaturemeasuringprobeismadeofaplug,awire,ahandle
and a metal tube with an outer diameter of Φ5mm×220mm. The
frontendofthetubeispackagedwithatemperaturesensor,whichis
suitableformeasuringthetemperatureofmaterialsandclinker.
2
MainTester
The instrument is suitable for on-site construction temperature
measurement of various construction projects. It can be used with
temperature measurement probes to measure the temperature of
materialsandclinker,suchas:gas,liquid,fluid,mixtureandgranular
materials; and embedded temperature measurement line. It can be
used to measure the internal temperature of winter construction
concreteandmassconcrete.
1
Temperaturemeasurementline
3
Theembeddedtemperaturemeasuringlineismadeofaplug,awire
and a temperature sensor, which is suitable for measuring the
internal temperature of the concrete. Each temperature measuring
linecanmeasurethetemperatureatonepoint,andthetemperature
measuringpointcanbearrangedarbitrarilyduringtheconstruction.
In order to facilitatelayered temperaturemeasurement,the plugof
each temperature measurement cable has a label affixed with a
correspondinglengthspecification.
4、Themaintechnicalindicators
Temperaturemeasurementrange:-30°C~150°C
Temperaturemeasurementerror:≤±0.5°C
Operatingenvironmenttemperature:20°C~50°℃
Displaymode:3-digitLCDscreen
Powersupply:9Vlaminatedbattery
Weight:200g
Hostvolume:135mm×72mm×32mm
Resolution:0.1°C
1
2
3
4
5
6
7
8
5、Usemethod
Usethehostandtemperatureprobetomeasurethetemperature
ofthematerial
1
Inserttheplugofthetemperatureprobeintothesocketofthehost,
pressthepowerswitch,andinsertthemetalclawofthetemperature
probeintotheobjecttobemeasured,theinsertiondepthisnotless
than1/2ofitslength,andthetemperaturedataisreadonthehostin
abouttwominutes.Whenmeasuringthetemperatureofthemixture,
in order to avoid excessive impact between the temperature probe
andthehardobjectsinthemixtureandaffecttheservicelife,ametal
rod can be used to reserve a hole in the mixture, and then the
temperature probe can be inserted into the hole Temperature
measurement. The temperature probe should be wiped clean after
eachuse.
Measurethetemperatureofmassconcretewiththehostand
temperaturemeasuringline
2
After the construction temperature measurement plan is determined,
selec t a t emperatur e measu rement line with appropr iate lengt h
specifications according to the number and depth of the temperature
m e a s u r e m e n t p o i n t s , f o r e x a m p l e : t h e a c t u a l t e m p e r a t u r e
01 03
06
6、Batteryreplacement
1
measurement point depth is 0.2m~0.3m, and the 0.5m temperature
m e a s u r e m e n t l i n e c a n b e s e l e c t e d ; t h e a c t u a l t e m p e r a t u r e
measurement The point depth is 2.5m~2.8m, and the temperature
measurement line with a specification of 3m can be selected, and so
on. When pre-embedded, steel bars and other pieces can be used as
supports, and the temperature measurement line is tied to the support
according to the distance of the longitudinal temperature measurement
point. The temperature sensor and the support should be insulated.
When pouring the concrete, implant the support with the temperature
measuring wire into the concrete, the temperature sensor is at the
temperature measuring point, and the plug is left outside of the
concrete and covered with a plastic bag to avoid moisture and keep it
clean. For ease of operation, the length of the wire left outside should
be greater than 20cm. When measuring the temperature, press the
power switch of the main unit and insert the plug of the temperature
measurement line into the socket of the main unit, and the temperature
of the corresponding temperature measurement point can be displayed
on the main unit's display screen.
When pouring concrete, reserve temperature measurement holes
according to the winter construction temperature measurement
plan,placeatemperaturemeasurementwireineachhole,andleave
theplugofthetemperaturemeasurementwireoutsidetheholeand
coveritwithaplasticbagtoavoidmoistureandkeepitclean.When
measuringthetemperature,pressthepowerswitchofthemainunit
and insert the plug of the temperature measurement line into the
socket of the main unit, and the temperature of the corresponding
temperaturemeasurementpointcanbedisplayedonthemainunit's
display screen. After each stage of temperature measurement, the
temperature measurement line will be stored for future use. The
temperature measuring line can also be buried in the concrete for
one-timeuse.
Usethehostandtemperaturemeasuringlinetomeasuretheconcrete
temperatureduringwinterconstruction
3
Useofnighttemperaturereadingandlightingfunction
4
Whenusedatnightorinadarkenvironment,pressthehostbacklight
switch, the LCD screen can emit blue background light, making the
readingclearandeye-catching.Pressthelightswitch,thelightturns
on,whichisequivalenttoaflashlight.
WhenLOBATappearsintheupperleftcornerofthedisplayofthehost
or cannot be turne d on no rma lly, i t is us ual ly caused by in suffi cie nt
batteryvoltage,andanewbatteryneedstobereplaced.Themethod
is asfollows: Open the batterycompartment coverbehind the main
unit,takeoutthe oldbatteryfromthe batterycompartment, buckle
thenew battery,and then restorethebatterycompartment coverto
itsoriginalposition.
7、Batteryreplacement
When the host is not connected to the temperature measuring
probeorthetemperature measuringline,"-1"is displayedonthe
displayasthepreparationstate.
2Do not useexcessive force duringoperation.Holdthe plugfirmly
wheninsertingorunplugging theplugintooroutof thesocketof
thehost.
3Iftheplugorthesocketofthemainunitgetswetduetoaccidental
ingressofwater,pleasewipeitand dry itbefore using it toavoid
inaccuratetemperaturemeasurementresults.
4The instrument should be turned off in time after use, and the
battery should be removed when i t is not used for a long time to
avoiddamagetotheinstrument.
5Do not open the back cover of the main unit by yourself. Please
send it back to the manufacturer or agency when you need to
repairorcalibrateit.
8、Accessories
11copyofinstructionmanual
21copyofproductinspectioncertificate
31copyofproductwarrantycard
4Instrumentsets1piece
5Batteries
9、Options
0.5m、1m、1.5m、2m、2.5m、3m、
3.5m、4m、4.5m、5m
01
02
03
Optionalaccessories
Temperatureprobe
Optionalspecificationoftemperature
measuringline.
Otherspecificationsofthetemperature
measuringlinecanbecustomized.
0504 07
建筑电⼦测温仪
36.8
Switch Backlight
Lighting
Temperature range
Measurement Error
Environment Temperature
Shenzhen Noyafa Electronic Co., Ltd
Building Electronic Thermometer
  • Page 1 1
  • Page 2 2

NOYAFA NF-514 User manual

Brand
NOYAFA
Model
NF-514
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents