Chargers ENZ1000 is a versatile wireless charger with a built-in LED mirror and pen holder, designed to enhance your workspace and provide convenient charging for your Qi-enabled devices.
Chargers ENZ1000 is a versatile wireless charger with a built-in LED mirror and pen holder, designed to enhance your workspace and provide convenient charging for your Qi-enabled devices.
User’sManual
Item#ENZ1000
WIRELESS CHARGER VANTI MIRROR
ITEM#ENZ1000 WIRELESS CHARGER VANTI MIRROR contain
3 parts , LED mirror w/ flexible tube ,pen holder ,and wireless
charging pad .
Specification as below :
Inputs: DC 5V/2A; 9V/1.67A
Output: 10W (Max)
Lamp power : 1W
Product Size: 170*85*345MM
Charging distance: 2-8mm
Indicator Light :
Power on : red light flasing 3times then turn solid red
Phone Charging : Solid blue light
FOD Model :: Blud light flashing
LED mirror model:the led light have 3 brightness level , short
press the led button to turn on the light after power on the
devices ,the light will be brighter by pressing the led button
repeatedly,and light off on the 4times .
It contain a pen holder for you to collect your pen into the
hole ,make your working desk tidy .
V. Safety Precautions
1. This product is suitable for charging equipment that support
wireless charging
2. Disassembly of the product is prohibited.
3、Please place the equipment in a ventilated place and avoid high
temperature or direct sunlight.
4. Children are not allowed to use this product alone and should
use it under the supervision of a guardian.
5, carefully and gently put, do not hit the mirror part of the product
with hard objects.
6、Maintenance needs to be waterproof and keep the equipment in
power-off state.
FCC WARNING:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled
enviroment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
-
1
-
2
-
3
-
4
Chargers ENZ1000 is a versatile wireless charger with a built-in LED mirror and pen holder, designed to enhance your workspace and provide convenient charging for your Qi-enabled devices.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
