RenewAire L85 Core Owner's manual

  • Hello! I'm a chat assistant and I have reviewed the provided installation sheet for the RenewAire L-85 core replacement procedure. This document provides step-by-step instructions on how to replace the core in EV450 units, including how to handle spacers and V-shaped bars. I am ready to answer all your questions related to this document.
  • What is the service part number for the replacement core?
    What should be done with spacers from the old core?
    How are the V-shaped bars attached?
    How are the nylon spacers attached?
Member of the S&P Group
Family of Brands
2020 © RenewAire LLC
139302_001_APR20
INSTALLATION
If replacing the core in an EV450 unit with filters that have approximately a 3/8" gap between the back of the filter
and core face, and filter spacers attached to the top and bottom pans of two core faces:
u Remove the spacers from the core being replaced and attach them to RPART core 990058 (reuse existing
fasteners), using holes located in the top and bottom pan on two core sides.
u The bottom core pan gets the two “V” shaped bars attached, with the “V” pointed towards the mounting strap,
using the six ½" long screws removed from the core being replaced.
u The six nylon spacers get attached to the top core pan using the six longer screws removed from the core being
replaced.
Installation Sheet: EV450IN and EV450RT Service Part Number 990058
L-85 Core Replacement Procedure
www.renewaire.com (800) 627- 4499 [email protected]
FACTORY ASSISTANCE
To contact RenewAire Customer Service:
Call 800-627-4499
Email: RenewAireSuppor[email protected]
/