SCE SCE-103370 Installation Information

Type
Installation Information
spec-handle-large-instman.pdf
1
Padlock Door Handle With large Door Rod Kit
Insert stop pin here
Handle turns counter clockwise
Insert stop pin here
Handle turns clockwise
Optional Rod Kit - SCE-103370
SCE-ARK36 large door rod kit for 2 or 3 point latching
SCE-ARK39 large door rod kit for 2 or 3 point latching
Cutout Detail
Door Interior View
Installation of SCE door hardware on enclosures
that do not have handles, or provisions for handles.
1. Locate and drill handle and rod guide
mounting holes.
2. Install rod guides.
3. Measure door opening height.
• Door rod length =
(door opening height/2) – 2.50”
• Door rod assembly length =
(door opening height/2) + 2.33”
4. Install door handle and latch plate.
5. Insert door rod through the rod guide before
assembling the ramp shoes.
6. Install ramp shoes to the door rods and insert
the 10-32 set screw, then attach door rods to
the latch plate.
4.125
I.D. door
typical
C
L
Handle cutout
Ø.886
.792
Ø.250
C
L
1.090
2.063
I.D. flange
door opening
Cutout detail
See note 3 to
explain rod
spec-handle-large-instman.pdf
2
Recommended Handles
-SCE-PH5 (5.00 padlockable handle)
-SCE-PCH5 (5.00 padlockable slotted coin proof handle)
-SCE-PCH5-7SC (5.00 padlockable 7mm square coin proof handle)
-SCE-PKH5 (5.00 padlockable key locking handle)
-SCE-PH7 (7.00 padlockable handle)
-SCE-PCH7 (7.00 padlockable slotted coin proof handle)
-SCE-PCH7-7SC (7.00 padlockable 7mm square coin proof handle)
-SCE-PKH7 (7.00 padlockable key locking handle)
¼ -20 x ½ arc stud
or drill Ø0.25 for
¼ -20 fastener and
sealing washer
Set screw
Flange nut
Flange bolt
Left hand large
3pt cam
Door hinged
on left
Right hand large
3pt cam
Door Hinged
on right
Door rod guide
Door rod adapter
Set screw
Door handle cam
Door rod guide
Ramp shoe
2.50 x .625
aluminum flat bar
  • Page 1 1
  • Page 2 2

SCE SCE-103370 Installation Information

Type
Installation Information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI