About the Step-Up Transformer
The step-up transformer increases Factory Supply Power to 460VAC input power to the Kval
Machine (s).
Note: Refer to the machine electrical print for wiring information.
Note: Refer to OEM documentation for full maintenance or repair instructions.
Prior to performing any maintenance, repairs, cleaning you must discon-
nect, tag out, or lock out . This procedure should be done in accordance
with applicable state and/or federal code requirements. All maintenance
and repairs to electrical circuitry should only be performed by a qualified
electrician.
Transformer Assembly
The Transformer Assembly is a stand-alone construction that interfaces factory power to the
machine line. The assembly includes an electrical panel and a high voltage transformer that is
wired to increase the voltage to the machine line.
Step-Up Transformer
Electrical Panel
Power Cables to
Machine Line