Eurotech ReliaLORA 10-12 Owner's manual

Type
Owner's manual

Eurotech ReliaLORA 10-12 is a LORA Gateway Expansion Module that enables you to connect your devices to the Internet of Things (IoT). It is designed to be used with the ReliaGATE 10-12 industrial gateway and provides a simple and cost-effective way to add LoRaWAN connectivity to your applications.

The ReliaLORA 10-12 supports the LoRaWAN 1.0.2 protocol and can be used to connect up to 255 LoRaWAN devices. It features a high-performance Semtech SX1276 transceiver and a powerful ARM Cortex-M4 processor, which provides excellent range and reliability.

Eurotech ReliaLORA 10-12 is a LORA Gateway Expansion Module that enables you to connect your devices to the Internet of Things (IoT). It is designed to be used with the ReliaGATE 10-12 industrial gateway and provides a simple and cost-effective way to add LoRaWAN connectivity to your applications.

The ReliaLORA 10-12 supports the LoRaWAN 1.0.2 protocol and can be used to connect up to 255 LoRaWAN devices. It features a high-performance Semtech SX1276 transceiver and a powerful ARM Cortex-M4 processor, which provides excellent range and reliability.

Relia
LORA 10-12-xx
LORA Gateway
Expansion Module
USER MANUAL
R
ev. 1-1 — 1 April 2019 ReliaLORA-10-12-xx_UserMan_EN_1-1 — ENGLISH
© 2018 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Trademarks
All trademarks, registered trademarks, logos, trade names and product names contained in this
document are the property of their respective owners.
Intended audience
This document is intended for system integrators: skilled persons with a thorough knowledge of linking
together different computing systems and software applications physically or functionally, to operate as a
coordinated whole, in compliance with the applicable regulations.
Disclaimer of liability
Eurotech has reviewed the contents of this document to ensure accuracy and consistency with the
hardware and software described.
Information in this document is reviewed regularly. Any necessary updates are included in
subsequent revisions.
Revision history
Revision
Description
Date
1-0
Preliminary
22 January 2018
1-1
First release
1 April 2019
ReliaLORA 10-12-xx User Manual Rev. 1-1 Contents
3 /
38
Contents
Revision history .................................................................................................................................................. 2
Contents ...................................................................................................................................................................... 3
1 SAFETY INSTRUCTIONS .................................................................................................................................. 5
1.1 Signal words used in this document ......................................................................................................... 5
1.2 Observe antistatic precautions ................................................................................................................. 6
1.3 Connect power supply correctly ............................................................................................................... 6
2 HOW TO RECEIVE TECHNICAL ASSISTANCE ................................................................................................ 7
2.1 How to receive technical support ............................................................................................................. 7
2.2 How to return a product to Eurotech ........................................................................................................ 7
3 CONVENTIONS USED IN THIS DOCUMENT .................................................................................................... 8
3.1 Conventions for signal names .................................................................................................................. 8
3.2 Abbreviations for direction and electrical characteristics of a signal ........................................................ 8
4 GETTING STARTED ............................................................................................................................................ 9
5 PRODUCT OVERVIEW ..................................................................................................................................... 11
5.1 Internal Block Diagram ........................................................................................................................... 12
5.2 Functional Block Diagram ...................................................................................................................... 13
5.3 Product labels ......................................................................................................................................... 14
6 DECLARATION OF CONFORMITY ................................................................................................................. 16
6.1 CE Marking ............................................................................................................................................. 16
6.2 WEEE compliance .................................................................................................................................. 16
6.3 RoHS 2 compliance................................................................................................................................ 17
6.4 Electromagnetic Compatibility ................................................................................................................ 17
6.4.1 Electromagnetic Compatibility (for EU) .................................................................................. 17
6.4.2 FCC compliance (for USA) .................................................................................................... 17
7 TECHNICAL SPECIFICATIONS....................................................................................................................... 18
8 INTERFACES OVERVIEW ............................................................................................................................... 19
8.1 Antenna interface ................................................................................................................................... 19
8.2 ReliaGATE 10-12 interface .................................................................................................................... 20
9 HOW TO SET UP AND CONNECT TO A LOCAL LORA SERVER ................................................................. 22
9.1 Example ................................................................................................................................................. 22
9.1.1 Set up a local LoRa server .................................................................................................... 23
9.1.2 Configure and connect the LoRa gateway to the LoRa WAN Server .................................... 23
9.1.3 Configure the LoRa Server to accept the LoRa gateway ...................................................... 24
9.2 Further reading ....................................................................................................................................... 24
10 THE SOFTWARE ............................................................................................................................................... 25
10.1 The Linux OS Distribution ...................................................................................................................... 25
10.2 How to access the interfaces under Linux ............................................................................................. 25
11 HOW TO LOG IN TO THE ADMINISTRATION CONSOLE .............................................................................. 26
11.1 How to log in using the Console port ..................................................................................................... 26
11.2 How to log in via Secure Shell (SSH) ..................................................................................................... 26
11.3 How to log in if your development PC is running Linux .......................................................................... 27
11.4 How to login if your development PC is running Windows ..................................................................... 28
Contents ReliaLORA 10-12-xx User Manual Rev. 1-1
4
/ 38
11.5 How to change your security settings .................................................................................................... 28
12 SOFTWARE FUNCTIONS ................................................................................................................................. 29
13 EUROTECH M2M / IOT SOLUTIONS ............................................................................................................... 30
13.1 Everyware Software Framework (ESF).................................................................................................. 30
13.2 The ESF Web UI .................................................................................................................................... 30
13.3 Everyware Cloud (EC)............................................................................................................................ 31
13.4 For further information ............................................................................................................................ 31
14 MECHANICAL SPECIFICATIONS .................................................................................................................... 32
14.1 ReliaLORA 10-12-xx mechanical dimensions ........................................................................................ 32
15 HOW TO INSTALL THE PRODUCT.................................................................................................................. 33
15.1 HOW TO ATTACH ReliaLORA 10-12 TO ReliaGATE 10-12 ................................................................ 33
15.2 Which screws are used .......................................................................................................................... 33
16 HOW TO MAINTAIN THE PRODUCT ............................................................................................................. 35
16.1 Use antistatic precautions ...................................................................................................................... 35
16.2 Remove the power supply ...................................................................................................................... 35
16.3 Inspect the installation of the product ..................................................................................................... 36
16.4 Clean the product ................................................................................................................................... 36
Notes .......................................................................................................................................................................... 37
ReliaLORA 10-12-xx User Manual Rev. 1-1 SAFETY INSTRUCTIONS
5 /
38
1 SAFETY INSTRUCTIONS
CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS CONTAINED IN THIS
DOCUMENT BEFORE INSTALLING / OPERATING THE PRODUCT.
KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
Whenever you have any doubt regarding the correct understanding of the instructions contained in
this document contact your local Eurotech Technical Support Team (see the last page of this
document for further details).
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the
following precautions, as well as using good technical judgement, whenever installing / operating
the product.
Failure to comply with these instructions or with specific warnings elsewhere in this document
violates safety standards of design and manufacture, and intended use of the product.
Eurotech assumes no liability for any failure to comply with these instructions.
1.1 Signal words used in this document
Table 1 Hazard Notification Signal Words ANSI Z535.4 2007
Hazard Notification Signal Word
Description
INDICATES A HAZARD WITH A
LOW LEVEL OF RISK WHICH, IF
NOT AVOIDED, COULD RESULT IN
MINOR OR MODERATE INJURY
INDICATES A HAZARD WITH A
MEDIUM LEVEL OF RISK WHICH, IF
NOT AVOIDED, COULD RESULT IN
DEATH OR SERIOUS INJURY
INDICATES A HAZARD WITH A
HIGH LEVEL OF RISK WHICH, IF
NOT AVOIDED, WILL RESULT IN
DEATH OR SERIOUS INJURY
NOTICE: Indicates practices not related to personal injury, such as:
An instruction to follow to use the product effectively
A statement of company policy related to product or property
protection
SAFETY INSTRUCTIONS ReliaLORA 10-12-xx User Manual Rev. 1-1
6
/ 38
1.2 Observe antistatic precautions
PREVENTING ELECTROSTATIC DISCHARGE (ESD)
When handling the product described in this document, always use appropriate antistatic
precautions to avoid damage due to electrostatic discharge.
For example: use a wrist strap or ESD cuff kept in constant contact with bare skin and
attached to an ESD ground.
1.3 Connect power supply correctly
ELECTRIC SHOCK HAZARD
Before applying power, thoroughly review all installation, operation, and safety instructions.
Failure to supply power correctly, or failure to follow all operating instructions correctly, may
create an electric shock hazard, which could result in personal injury or loss of life, and/or
damage to equipment or other property.
To avoid injuries:
Before operating any equipment, carefully read any supplied instructions
Do not perform any connections with wet hands
Check any power cords for damage before using them
Use certified power cables. The power cables must meet the power requirements
of the device
Position cables with care. Avoid positioning cables in places where they may be
trampled or compressed by objects placed on them
Take particular care of plugs, power-points and outlets. Avoid overcharging them
Always disconnect power and discharge the circuits before touching them
Only start the product with a power supply that meets the requirements stated on
the voltage label. In case of uncertainties about the required power supply,
contact the Eurotech Technical Support Team (see the back cover for full contact
details) or the electricity authority.
ReliaLORA 10-12-xx User Manual Rev. 1-1 HOW TO RECEIVE TECHNICAL ASSISTANCE
7 /
38
2 HOW TO RECEIVE TECHNICAL ASSISTANCE
2.1 How to receive technical support
If you have technical questions, or if you cannot isolate a problem with your product, or for any
inquiry about repair and returns policies, contact:
The Eurotech Global Support Centre: https://support.eurotech.com/
Your local Eurotech Technical Support Team: see the back cover for full contact details.
2.2 How to return a product to Eurotech
To return a product to Eurotech, complete the following steps:
1. Send an email to your local Eurotech Technical Support Team (see the back cover for full
contact details) specifying:
Product Model Number (printed on the product label)
Product Serial Number (printed on the product label)
Recap of the fault description
2. Receive a reply from the Eurotech RMA Department. It contains:
The RMA (Return Merchandise Authorization) number
The shipping information
3. Pack the product using anti-static material and place it in a sturdy box with enough packing
material to adequately cushion it
4. Ship the product to Eurotech following the information received from the Eurotech RMA
Department.
NOTICE: Any product returned to Eurotech that is found to be damaged due
to inappropriate packaging or customer damage will not be covered by the
warranty!
When shipping the product:
1. Pack it using anti-static material
2. Place it in a sturdy box with enough packing material to adequately
cushion it
CONVENTIONS USED IN THIS DOCUMENT ReliaLORA 10-12-xx User Manual Rev. 1-1
8
/ 38
3 CONVENTIONS USED IN THIS DOCUMENT
3.1 Conventions for signal names
Convention
Description
GND
Digital ground plane
#
Active low signal
_P
Positive signal in differential pair
_N
Negative signal in differential pair
3.2 Abbreviations for direction and electrical characteristics of
a signal
Convention
Description
I
Signal is an input to the system
O
Signal is an output from the system
IO
Signal may be input or output
P
Power and ground
A
Analog signal
3.3
3.3 V signal level
5
5 V signal level
NC
No Connection
Reserved
Use is reserved to Eurotech
ReliaLORA 10-12-xx User Manual Rev. 1-1 GETTING STARTED
9 /
38
4 GETTING STARTED
To get started with the ReliaLORA 10-12-xx, follow these steps:
1. Know the ReliaLORA 10-12-xx interfaces
The ReliaLORA 10-12-xx provides connectivity to several wired interfaces. For further information,
see:
"PRODUCT OVERVIEW" on page 11
"DECLARATION OF CONFORMITY" on page 16
"TECHNICAL SPECIFICATIONS" on page 18
"INTERFACES OVERVIEW" on page 19
"SOFTWARE FUNCTIONS" on page 22
2. Attach the ReliaLORA 10-12-xx to the ReliaGATE 10-12-xx
To use ReliaLORA 10-12-xx correctly, it must be attached to a ReliaGATE 10-12-xx gateway. For
more information, see "HOW TO ATTACH ReliaLORA 10-12 TO ReliaGATE 10-12" on page 33
3. Log in to the Administration Console.
The ReliaGATE 10-12-xx with attached ReliaLORA 10-12-xx runs a Linux distribution based on a
Yocto framework and supports login via a variety of methods. For further information, see:
"THE SOFTWARE" on page 11
"HOW TO LOG IN TO THE ADMINISTRATION CONSOLE" on page 19
"How to access the interfaces under Linux" on page 22
3. Start developing your applications.
The ReliaGATE 10-12-xx gateway supports ESF, which is an inclusive software framework that puts
a middleware layer between the operating system and the OEM application.
For detailed instructions, and sample applications for developing device applications using ESF on
Eurotech platforms, see: http://esf.eurotech.com/docs and SOFTWARE FUNCTIONS" on page 22
.
4. Install the ReliaLORA 10-12-xx.
The ReliaLORA 10-12-xx is lightweight, compact, and easy to install. For further information, see:
"MECHANICAL SPECIFICATIONS" on page 32
"HOW TO INSTALL THE PRODUCT" on page 33
GETTING STARTED ReliaLORA 10-12-xx User Manual Rev. 1-1
10
/ 38
5. Maintain the ReliaLORA 10-12-xx.
Periodic maintenance of the ReliaLORA 10-12-xx ensures greater integrity and reliable operation.
For further information, see:
"HOW TO MAINTAIN THE PRODUCT" on page 35
ReliaLORA 10-12-xx User Manual Rev. 1-1 PRODUCT OVERVIEW
11 /
38
5 PRODUCT OVERVIEW
The ReliaLORA 10-12-xx is a compact and lightweight device intended to be used together with the
ReliaGATE 10-12-xx IoT gateway.
ReliaLORA 10-12 is a LoRa Gateway module that adds LPWAN capabilities to the ReliaGATE 10-
12. Based on the Semtech SX1301 data concentrator, ReliaLORA 10-12 is an industrial grade
expansion module. Fully compatible with existing LoRa infrastructures and capable of managing
thousands of nodes, it is the fastest way to bridge an LPWAN with any cloud application.
ReliaLORA 10-12 is a global device that supports European and North America ISM bands; its long-
range radio reaches up to 15 km / 10 miles in unobstructed applications. In difficult environments,
such as urban areas with multiple building its penetration reaches a radius of 2 km / 1.5 miles
ReliaLORA 10-12 is supported by Everyware Software Framework (ESF), a commercial, enterprise-
ready edition of Eclipse Kura, the open source Java/ OSGi middleware for IoT gateways. Distributed
and supported by Eurotech, ESF adds advanced security, diagnostics, provisioning, remote access
and full integration with Everyware Cloud (EC), Eurotech’s IoT integration platform (separately
available).
ReliaLORA 10-12 can be personalized and customized for additional capabilities through Eurotech
Professional Services.
Figure 5.1 - The ReliaLORA 10-12-xx
PRODUCT OVERVIEW ReliaLORA 10-12-xx User Manual Rev. 1-1
12
/ 38
5.1 Internal Block Diagram
The following picture shows the internal block diagram of the ReliaLORA expansion module.
The core of the device is a miniPCI-express form-factor card based on the Semtech chipset
SX1301.
The LORA expansion module requires an external antenna connected via RP-SMA.
The following interfaces are used to communicate with the LORA card:
Main communication interface SPI
5V/1A power from ReliaGATE 10-12
3xGPIO (for RESET, power control and PPS signal)
I2C (for configuration purposes only)
ReliaLORA 10-12-xx User Manual Rev. 1-1 PRODUCT OVERVIEW
13 /
38
5.2 Functional Block Diagram
The following picture shows the functional block diagram of the ReliaLORA expansion module and
how it fits into a complete system.
Network Server
LORA Packet Forwarder (On Device)
Ethernet/
IP Network
Customer
Server
LORA Gateway / HAL
Linux OS / low level driver support
Serial Peripheral
Interface (SPI)
RF
PRODUCT OVERVIEW ReliaLORA 10-12-xx User Manual Rev. 1-1
14
/ 38
5.3 Product labels
The product label is located on the bottom side of the product. There are two different labels one
for North America (operating on 915 MHz frequency) and one for European Union (operating on 868
MHz frequency).
Label content
Label example
• Eurotech logo
• Eurotech address
• Manufacturer
ReliaLORA model number
ReliaLORA serial number
ReliaLORA serial number in bar-code
format
• FCC logo
1
ReliaLORA 10-12-xx User Manual Rev. 1-1 PRODUCT OVERVIEW
15 /
38
Label content
Label example
• Eurotech logo
• Eurotech address
• Manufacturer
ReliaLORA model number
ReliaLORA serial number
ReliaLORA serial number in bar-code
format
• CE mark
• WEEE symbol
DECLARATION OF CONFORMITY ReliaLORA 10-12-xx User Manual Rev. 1-1
16
/ 38
6 DECLARATION OF CONFORMITY
6.1 CE Marking
This product is CE marked.
The product meets the guidelines listed in the following sections.
Eurotech is not responsible for the use of this product together with equipment (eg power supplies,
personal computers, etc) that are not CE marked and compliant with the requirements specified in
this document.
This product is compliant with:
Reduction of Certain Hazardous Substances (RoHS2)
IP40
CE
IEC62368-1 Information Technology Equipment - Safety - Part 1: General
Requirements
6.2 WEEE compliance
In compliance with the Directive 2012/19/EU of the European Parliament and of the Council of 4
July 2012 on waste electrical and electronic equipment (WEEE), the symbol above, shown on the
product or within its literature, indicates separate collection for this electrical and electronic
equipment (EEE) that has been placed on the market after 2005.
This product, at the end of its life cycle, must be collected separately and managed in accordance
with the provisions of the current Directive on waste electrical and electronic equipment.
Because of the substances present in the product, improper use or disposal of the refuse can cause
damage to human health and the environment.
To avoid any possible legal implications, contact your local waste collection body for full recycling
information.
ReliaLORA 10-12-xx User Manual Rev. 1-1 DECLARATION OF CONFORMITY
17 /
38
6.3 RoHS 2 compliance
The product described in this document, including all its components and its sub-assemblies, have
been manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of
the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
6.4 Electromagnetic Compatibility
6.4.1 Electromagnetic Compatibility (for EU)
Conditions of operation
This product meets the requirements of the EC Directive 2004/108/EC on electromagnetic
compatibility.
This product is designed for use in industrial areas.
Modifications
Any modifications made to this product that are not approved by Eurotech may void the
prerequisites for the EC conformity declaration.
6.4.2 FCC compliance (for USA)
This device and its accessories comply with part 15 of FCC rules. Operation is subject to the
following two conditions:
1. This device and its accessories may not cause harmful interference.
2. This device and its accessories must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications that are not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
The ReliaLoRa contains a third party radio module complying with FCC and ISED modular
approvals.
FCCID: AU792U13A16859
IC ID: 125A-0056
TECHNICAL SPECIFICATIONS ReliaLORA 10-12-xx User Manual Rev. 1-1
18
/ 38
7 TECHNICAL SPECIFICATIONS
XX
-01
-02
Base Band
Processor
Data Concentrator
Semtech SX1301
Radio Interfaces LORA Bands European 868 MHz
(863-870 MHz)
North American 915
MHz(902-928MHz)
Transmission
-6 to 25 dBm
-6 to 27 dBm
Antennas (External)
1x RP-SMA
I/O Interfaces
Exp. Connector
Yes, for Side Expansion Modules
Power
Input
5V (Provided by ReliaGATE 10-12)
Consumption
3W MAX
Environment
Operating Temp
-20 °C to +70 °C
Storage Temp
-40 °C to +85 °C
Certifications
Regulatory
CE(RED)
FCC/ISED
Safety
EN 62368-1
Environmental
RoHS2; REACH
ISM Radio
CE(RED)
FCC/ISED
Ingress
IP40 (enclosure only, excluding connectors)
Mechanical
Enclosure
Material:
ABS
- Colour: aluminium
Dimensions
90.3 x 43.7 x 23.8 mm (WxHxL)
ReliaLORA 10-12-xx User Manual Rev. 1-1 INTERFACES OVERVIEW
19 /
38
8 INTERFACES OVERVIEW
This section gives you an overview of the interfaces on the ReliaLORA 10-12-xx.
8.1 Antenna interface
Antenna interface is available on the front side panel:
Figure 8.1 - Antenna interface layout
Connector layout:
Pin#
Description
1
Male Inner contact
2
Female connector body (outer thread)
Connector Specifications:
RP-SMA connector
Gender: Female
Mating Connector Specifications:
RP-SMA connector
Gender: Male
Recommended antenna:
Pulse Electronic W1063
https://productfinder.pulseeng.com/files/datasheets/W1063.pdf
1
INTERFACES OVERVIEW ReliaLORA 10-12-xx User Manual Rev. 1-1
20
/ 38
8.2 ReliaGATE 10-12 interface
The interface is available on the bottom side of the ReliaLORA 10-12-xx Expansion Interface
Figure 8.2 Left side panel interface layout
1
23
24
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Eurotech ReliaLORA 10-12 Owner's manual

Type
Owner's manual

Eurotech ReliaLORA 10-12 is a LORA Gateway Expansion Module that enables you to connect your devices to the Internet of Things (IoT). It is designed to be used with the ReliaGATE 10-12 industrial gateway and provides a simple and cost-effective way to add LoRaWAN connectivity to your applications.

The ReliaLORA 10-12 supports the LoRaWAN 1.0.2 protocol and can be used to connect up to 255 LoRaWAN devices. It features a high-performance Semtech SX1276 transceiver and a powerful ARM Cortex-M4 processor, which provides excellent range and reliability.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI