Wooden Camera 157100 User manual

Category
Camera mounting accessories
Type
User manual
Included:
(4) 1/4-20x3/8 socket cap
(2) #6-32x1/2 flat head
(1) 1/4-20x1/4 socket cap
(1) 3/16 allen wrench
(1) 5/64 allen wrench
UVF MOUNT V2
© Wooden Camera, Inc. 2011-2015
NOTE: To change viewfinder position, remove
ROD END CAP, flip NATO RAIL, reinstall and
adjust viewfinder using KNUCKLE THUMBSCREW
1. Select NATO RAIL KIT and remove TUBE CLAMP
2. Locate two 1/4-20 HOLES spaced between
25mm-36mm on CAMERA or CHEESEPLATE, select
1/4-20x3/8 SOCKET CAPS, tighten screws to
TUBE CLAMP using allen wrench
3. Slide NATO RAIL KIT into TUBE CLAMP, tighten using
THUMB SCREW
4. Select L-BRACKET or ALPHA ADAPTER, locate two #6
SCREWS*, tighten to KNUCKLE using allen wrench
5. Slide KNUCKLE onto NATO RAIL
Use with:
RED BOMB EVF
Zacuto
Cineroid
Others
Use with:
Alphatron EVF
Small HD
Others
M4 screw can be replaced with spare thumb
screw included with NATO RAIL KIT
*Red thread locker material maybe present on #6 SCREWS.
This prevents loosening over time.
  • Page 1 1

Wooden Camera 157100 User manual

Category
Camera mounting accessories
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI