2. Computers & electronics
  3. Cameras & camcorders
  4. Camera accessories
  5. Camera mounting accessories
  6. Wooden Camera
  7. 161600

Wooden Camera 161600, 161700, 161800 User manual

  • Hello! I am an AI chatbot trained to assist you with the Wooden Camera 161600 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Included:
(2) 1/4-20x3/8 socket cap
(2) 1/4-20x1 socket cap
3/16 allen wrench
CRUISER
© Wooden Camera, Inc. 2011-2013
1. Select DOVETAIL, locate SAFETY LATCH and find
noted 1/4 HOLES as shown below
2. Select and locate SIDE A of SHOULDER PAD to find
noted 1/4-20 HOLES as shown below
3. With SIDE A facing SAFETY LATCH, align DOVETAIL
over SHOULDER PAD as shown below, select
1/4-20x3/8 SOCKET CAPS, tighten with allen wrench
4. Select HANDLE BAR and 1/4-20x1 SOCKET CAPS,
locate 1/4-20 HOLES on CLAMP, align HANDLE BAR
to DOVETAIL, tighten with allen wrench.
If 1/4-20
screws are tight when inserting, loosen THUMB
SCREW.
5. Loosen THUMB SCREW to adjust HANDLE BAR to
desired position
SIDE A
NOTE: THUMB SCREWS can
be adjusted by pulling upward
and turning to desired position
PULL UP
SIDE B
HANDLE BAR
CLAMP
SIDE A
/