2 DX-WD1239
Need help? Call 800-305-2204
Safety information and specifications
Warnings
• Do not let children climb on your TV cart or play near it. Your TV cart may tip over causing the TV or cart to
injure someone.
• When placing items on the shelves or the top of the TV cart, load the bottom shelf first and work up to the top
of your TV cart.
• Do not overload the shelves. They may break.
• Do not move your TV cart with items on the top or shelves. Your TV cart may tip over and injure someone.
Before you move your TV cart, unload starting with the top of your TV cart and working to the bottom shelf.
CAUTION:
This TV cart’s work surface is intended only for
use with a product not weighing more than 95
lbs. (43.09 kg) and having 42" wide flat-panel TV
dimensions that will permit it to sit evenly on your TV cart.
Using with other products, including products that weigh
more than the maximum weight allowed, may result in
instability, which may cause possible injury.
Maximum weight: 95 lbs. (43.09 kg)
Maximum screen size: 42"
Weight capacity (top of TV cart): 95 lbs. (43 kg)
Weight capacity (middle shelf): 25 lbs. (11 kg)
Weight capacity (lower shelf): 30 lbs (13 kg)
Overall dimensions: W × H × D
28.12 x 18.75 × 14.88 inches (71.45 × 47.6 × 37.8 cm)
Top of TV cart: W × D
28.12 × 14.88 inches (71.45 × 37.8 cm)
Usable upper shelf (shelf in middle position) :W × H × D
17.81 × 6.31 × 13.56 inches (45.2 × 16 × 34.3 cm)
Usable lower shelf (shelf in middle position): W × H × D
17.81 × 6.38 × 15.5 inches (45.2 × 16.2 × 39.4 cm)
14.88" (35.25 cm)
28.12" (71.45 cm)
18.75" (47.6cm)
3
DX-WD1239
Need help? Call 800-305-2204
Package contents
Package contents: hardware
Make sure you have all the hardware necessary to assemble your new TV cart:
Using a screw that is too long will cause damage your TV cart. Before beginning assembly, separate each
type of screw. Carefully study the screw table below. You can use the ruler at the bottom of the screw
table to measure screws. Pay close attention to the color of each screw.
You may receive extra hardware with your TV cart.
Letter Description Qty. Letter Description Qty.
P6Q16
Tools needed
Hammer
No. 2 Phillips screwdriver
Caution: Do not
use an electric drill
or screwdriver
Label Hardware Qty.
I2 9
J2 9
K2
L2
Hidden cam
Cam dowel
Swivel caster
Non-swivel
caster
Label Hardware Qty.
M8
N4
O1
Metal pin
Rubber sleeve
Warning
label
Black 1 7/8" (47.75 mm) flat head screw
Black 9/16" (14.22 mm) large
head screw
1 0 20 30 40 50 60 70 80 90 100mm
1234in
4 DX-WD1239
Need help? Call 800-305-2204
Package contents: parts
Note: All parts except for the stop molding (H) have a lettered sticker to make identifying parts easier.
Letter Description Qty. Letter Description Qty.
A Right end 1EBottom 1
B Left end 1FAdjustable shelf 1
C Upright 1GValance 1
D Top 1HStop molding 1
5
DX-WD1239
Need help? Call 800-305-2204
Assembly instr uctions
Step1:
Assemble your TV cart on a carpeted floor or on the empty carton to avoid scratching your TV cart or the
floor.
Push nine hidden cams (I2) into the ends (A and B), upright (C), and top (D), then insert the metal end of a
cam dowel (J2) into each hidden cam.
You’ll need:
Do not tighten the hidden cams in this step.
Arrow
J2 (9)I2 (9)
6 DX-WD1239
Need help? Call 800-305-2204
Step 2:
Insert two metal pins (M) into the two holes beside the hidden cam on the right end (A).
Repeat this step for the left end (B).
You’ll need:
M (4)
7
DX-WD1239
Need help? Call 800-305-2204
Tightening hidden cams
In the remaining steps, use these illustrations for instructions on tightening hidden cams.
Warning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are not
completely tightened will loosen, and parts may separate.
You’ll need:
Arrow
Make sure that you turn the
hidden cam a minimum of
190° to a maximum of 210°.
Note the position of the arrow
on the hidden cam.
Arrow
In the illustration below,
the hidden cam has not
been tightened enough.
210°
190°
Phillips screwdriver
8 DX-WD1239
Need help? Call 800-305-2204
Step 3:
Fasten the stop molding (H) to the top (D). Use a Phillips screwdriver to tighten three hidden cams. See
“Tightening hidden cams” on page 7.
You’ll need:
Unfinished
surface
Arrow
Maximum210°
Minimum 190°
Phillips screwdriver
9
DX-WD1239
Need help? Call 800-305-2204
Step 4:
Fasten the left end (B) to the top (D). Use a Phillips screwdriver to tighten two hidden cams. See “Tightening
hidden cams” on page 7.
You’ll need:
Finished
edge
Arrow
Maximum 210°
Minimum 190°
Phillips screwdriver
10 DX-WD1239
Need help? Call 800-305-2204
Step 5:
Slide the valance (G) onto the two metal pins (M) in the left end (B).
Unfinished
surface
Finished
edge
11
DX-WD1239
Need help? Call 800-305-2204
Step 6:
Fasten the right end (A) to the top (D). Use a Phillips screwdriver to tighten two hidden cams. See “Tightening
hidden cams” on page 7.
Note: Make sure that the metal pins in the right end (A) insert into the holes in the valance (G).
You’ll need:
Finished
edge
Arrow
Maximum 210°
Minimum 190°
Phillips screwdriver
12 DX-WD1239
Need help? Call 800-305-2204
Step 7:
Fasten the upright (C) to the top (D). Use a Phillips screwdriver to tighten two hidden cams. See “Tightening
hidden cams” on page 7.
Fasten the bottom (E) to the ends (A and B) and upright (C). Use a Phillips screwdriver and six black 1 7/8" flat
head screws (P).
You’ll need:
Screw holes
Unfinished
surface
Long finished edge
Finished edge
Arrow
Maximum 210°
Minimum 190°
Phillips screwdriver
P (6)
13
DX-WD1239
Need help? Call 800-305-2204
Step 8:
Fasten the swivel casters (K) and the non-swivel casters (L) to the bottom (E). Use a Phillips screwdriver and
16 black 9/16" large head screws (Q) (four screws per caster).
You’ll need:
The tabs on the
non-swivel casters (K)
must insert into these
holes.
Phillips screwdriver Q (16)
14 DX-WD1239
Need help? Call 800-305-2204
Step 9:
Carefully stand your TV cart upright.
Push the rubber sleeves (N) on the metal pins (N), then insert the metal pins into the hole locations of your
choice in the right end (A) and upright (C). Set the adjustable shelf (F) onto the metal pins (M).
Apply the warning label (O) to the top (D). You should be able to read the label when the TV is removed from
your TV cart. When the TV is in place, it should hide the label. Peel off the backing and apply the label as
shown.
Caution: This is a permanent label intended to last for the life of the product. Once applied, do not try to
remove it. You may damage the finish on the top.
You’ll need:
Metal pin
with
rubber
sleeve
95 lbs
(43 kg)
25 lbs
(11 kg)
30 lbs
(13 kg)
Warning: Never use this
furniture with a TV that is too
large or too heavy. Severe
injury or death can occur. The
TV and furniture will be
unstable and may tip.
• The TV must weigh less
than 95 lbs.
• The base of the TV must
be able to sit completely
on this shelf.
N (4)M (4)
15
DX-WD1239
Need help? Call 800-305-2204
Still need help?
For customer service, call: 800-305-2204 (U.S./Canada markets)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2011 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective owners.
www.dynexproducts.com (800) 305-2204
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2011 BBY Solutions, Inc.
All rights reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
12-0784
ENGLISH
Certificate of Conformity
1. This certificate applies to the Sauder
Woodworking Product identified by this
instruction booklet.
2. This certificate applies to the compliance of this
product with the CPSC Ban on Lead-Containing
Paint (16 CFR 1303).
3. This product was manufactured by:
Sauder Woodworking Company
502 Middle Street
Archbold, Ohio 43502
(419) 446-2711
4. Date of Manufacture: ____________
Lot number: 346230
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dynex DX-WD1202 User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Arrow 843631130780 User manual
-
-
ViewSonic VB-STND-007 Operating instructions
-
Sauder 420566 Operating instructions
-
Presto 16" Skillet Installation guide
-
-
Insignia NS-WD1450 User manual
-
-
-