Huawei FreeBuds 3 User manual

Huawei FreeBuds 3

User Mannual

Issue

01

Date

2019-11-01

HUAWEI TECHNOLOGIES CO., LTD.

Issue 01 (2019-10-16)

i

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: support@huawei.com

Huawei FreeBuds 3

Contents

Issue 01 (2019-10-16)

ii

Contents

1 Features ........................................................................................................................................... 1

1.1 Power-on ....................................................................................................................................................................... 1

1.2 Pairing ........................................................................................................................................................................... 1

1.3 Audio Control ............................................................................................................................................................... 3

1.4 Active Noise Cancellation ............................................................................................................................................ 3

1.5 Charging the Earphones ................................................................................................................................................ 4

1.6 Charging the Charging Case ......................................................................................................................................... 4

1.7 Factory Settings Restoration ......................................................................................................................................... 4

1.8 Indicator Lights ............................................................................................................................................................. 5

2 More Functions .............................................................................................................................. 6

2.1 Installing the Huawei AI Life App ................................................................................................................................ 6

2.2 Adding FreeBuds 3 to the Device List .......................................................................................................................... 6

2.3 ANC Settings ................................................................................................................................................................ 7

2.4 Setting Double-tap Functions ....................................................................................................................................... 9

2.5 Software Update ........................................................................................................................................................... 9

Huawei FreeBuds 3

1 Features

Issue 01 (2019-10-16)

1

1 Features

1.1 Power-on

Open the charging case and press and hold the Function button for 2 seconds to power on the

charging case.

1.2 Pairing

Preparations:

Ensure that the earphones are inside the charging case. Open the charging case and place your

phone within 50 cm of the earphones.

Bluetooth pairing: Press and hold the Function button for 2 seconds until the inner indicator

light flashes white.

Huawei FreeBuds 3

1 Features

Issue 01 (2019-10-16)

2



Proximity pairing: When your phone screen is on, a pairing prompt will be automatically

displayed when your phone is close to the earphones. Touch CONNECT to complete the

one-step pairing.

A prompt will be displayed if the pairing is successful.

Huawei FreeBuds 3

1 Features

Issue 01 (2019-10-16)

3

This feature is only supported on EMUI 10.0 or later.

1.3 Audio Control

During music playback, double-tap the upper part of the right earbud handle to skip to the

next song.

You can set double-tap functions in the Huawei AI Life app. For details, see section 2.4 Setting Double-

tap Functions.

1.4 Active Noise Cancellation

Double-tap the upper part of the left earbud handle to enable or disable ANC mode.

Use the Huawei AI Life app to adjust the ANC level as needed. For details, see section 2.3 ANC

Settings.

Huawei FreeBuds 3

1 Features

Issue 01 (2019-10-16)

4

1.5 Charging the Earphones

To charge the earbuds, place them in the charging case to initiate automatic charging.

1.6 Charging the Charging Case

To charge the charging case, use a Type-C charger or place it on a compatible wireless charger

with the back side facing up.

1.7 Factory Settings Restoration

If the earphones fail to connect, play no sound, or cannot be found when searching on your

phone, restore the earphones to their factory settings for troubleshooting:

Ensure that the earphones are inside the charging case, open the case, and press and hold the

Function button for 7 seconds until the inner indicator light flashes red. When the indicator

Huawei FreeBuds 3

1 Features

Issue 01 (2019-10-16)

5

light flashes white, the earphones have been restored to their factory settings, and they will

then enter Pairing mode.

1.8 Indicator Lights



Inner indicator light

State Description

Turns

green

The battery level of the earphones is

higher than 60%.

Turns

yellow

The battery level of the earphones is

between 20% and 60%.

Turns red

The battery level of the earphones is lower

than 20%.

Flashes

white

The earphones have entered Pairing mode.

Flashes red

The earphones have been restored to their

factory settings.



Outer indicator light

State Description

The charging

case is being

charged

Turns

green

The battery level is higher than

90%.

Turns

yellow

The battery level is less than

90%.

The charging

case is not being

charged

Turns

green

The battery level is higher than

60%.

Turns

yellow

The battery level is between

20% and 60%.

Turns

red

The battery level is lower than

20%.

Huawei FreeBuds 3

2 More Functions

Issue 01 (2019-10-16)

6

2 More Functions

2.1 Installing the Huawei AI Life App

Use the browser on your phone to scan the QR code or use Huawei

AppGallery to download and install Huawei AI Life. Pair with FreeBuds 3

and add it to the device list. You can then use the app to adjust the ANC

level, set double-tap functions, and perform firmware updates when a new

version is available.

2.2 Adding FreeBuds 3 to the Device List

Preparations:



Download and install the Huawei AI Life app. For details, see section 2.1 Installing the

Huawei AI Life App.



Pair the FreeBuds 3 with your phone, or ensure that your FreeBuds 3 are in Pairing mode

(to do this, press and hold the Function button for 2 seconds).



Your phone is already connected to a Wi-Fi network.

Step 1 Open the Huawei AI Life app, touch the + icon in the upper right corner, and touch Add

device. The app will automatically scan all devices in the Wi-Fi network.

Step 2 In the list of scanned devices, find the earphones' device name and touch CONNECT on the

right side to add this device.

Huawei FreeBuds 3

2 More Functions

Issue 01 (2019-10-16)

7

Go to the home screen of the AI Life app, touch Home to view the added devices, and use the

app to adjust settings for the devices.

----End

2.3 ANC Settings

Preparations:



Download and install the Huawei AI Life app. For details, see section 2.1 Installing the

Huawei AI Life App.



Add FreeBuds 3 to the device list in AI Life. For details, see section 2.2 Adding

FreeBuds 3 to the Device List.

Step 1 Open the Huawei AI Life app. Go to the home screen of the app and touch Home to add

FreeBuds 3 to the device list.

Step 2 Touch Noise cancelling to see more details.

Huawei FreeBuds 3

2 More Functions

Issue 01 (2019-10-16)

8

Step 3 Then enable Noise cancelling.

Step 4 Move the blue dot on the dial to adjust the ANC level to a more comfortable level.

----End

Huawei FreeBuds 3

2 More Functions

Issue 01 (2019-10-16)

9

2.4 Setting Double-tap Functions

Preparations:



Download and install the Huawei AI Life app. For details, see section 2.1 Installing the

Huawei AI Life App.



Add FreeBuds 3 to the device list in the AI Life app. For details, see section 2.2 Adding

FreeBuds 3 to the Device List.

Step 1 Open the Huawei AI Life app. Go to the home screen of the app and touch Home to add

FreeBuds 3 to the device list.

Step 2 Touch Shortcuts.

Step 3 Set the double-tap functions for the earbuds as needed.

----End

2.5 Software Update

Preparations:



Add FreeBuds 3 to the device list in AI Life. For details, see section 2.2 Adding

FreeBuds 3 to the Device List.



Pair the FreeBuds 3 with your phone, or ensure that your FreeBuds 3 are in Pairing mode

(to do this, press and hold the Function button for 2 seconds).



Your phone is already connected to a Wi-Fi network.

Step 1 Open the Huawei AI Life app. Touch Home, and select the device FreeBuds 3.

Step 2 Touch Check for updates.

----End

Huawei FreeBuds 3

2 More Functions

Issue 01 (2019-10-16)

10



The current version will be displayed if a new version is not available.



An update prompt will be displayed if a new version is available.

Huawei FreeBuds 3

2 More Functions

Issue 01 (2019-10-16)

11

1. Touch UPDATE.

2. Touch OK when the update is complete and perform the operations as prompted.

Huawei FreeBuds 3 User manual

Huawei FreeBuds 3 User manual

Related papers

Other documents