AMS AS5403 Quick start guide

Type
Quick start guide

This manual is also suitable for

www.ams.com Revision 1.0 /26/Nov/12 page 1/3
AS5xxx Universal
Connector
B
oard
Quick
S
tart
Guide
:
AS5xxx UCB
Quick Start Guide
AS5xxx UCB
www.ams.com Revision 1.0 11/26/2012 page 2/3
1. Put the (A) Connectors (included in the NI8451 Kit) to the (B) PCB and screw on.
2. Use the (C) Jumper J1 to select 3.3 Volt or 5 Volt power supply.
3. Connect your adapter board to one of the fitting connectors regarding the labels.
(D) I
2
C interface connectors
(E) SPI interface connectors
A
A
B
B
C
D
D
D
D
E
E
Quick Start Guide
AS5xxx UCB
www.ams.com Revision 1.0 11/26/2012 page 3/3
4. Connect the AS5xxx UCB to the NI8451-Box as shown below:
For I2C-Interface OR SPI-Interface
5. Connect the NI8451-Box over USB to your PC.
6. Now the setup is ready for evaluation.
To download evaluation sample software for LabVIEW go to: www.ams.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

AMS AS5403 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI