Insignia NS-19E450A11 Quick setup guide

Insignia
Brand
Insignia
Model
NS-19E450A11
Category
LCD TVs
Type
Quick setup guide
19"/22" LED-LCD HDTV
QUICK SETUP
GUIDE
NS-19E450A11/NS-19E450WA11/
NS-22E450A11/NS-22E455C11
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Universal remote control TV codes (for all Insignia TVs manufactured after Jan. 1, 2007)
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
Remote control and
2 AAA batteries
Remote
control holder
Component
cable
TV stand and 3 screws
Quick Setup Guide
Audio
cable
Front features
Note:
To turn on your TV using the (power) button on your TV, press . Your TV turns
on and the button labels ( , INPUT, MENU, CH / CH , and VOL+ / VOL–) light
on the front of your TV. A “Please Wait” message appears for a few seconds, then
your TV displays the normal TV broadcast.
If your TV is turned on and the button labels on the front of your TV are not lit, press
any button except to light the button labels. Then press the button you want.
Button presses must be within 10 seconds of each other.
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Secure the stand to the screen with three screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the two screws securing the stand column to the TV, then remove the
stand column.
3 Secure the wall-mount bracket to the back of your TV using the screws provided
with the wall mount. screws. Wall-mount bracket and screws are not provided.
Setting up your remote control
1 Press down on the battery compartment cover lock, then remove the remote
control cover.
2 Insert two AAA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery
compartment.
3 Replace the cover.
Programming your remote control
To program your existing universal remote control to work with your new Insignia
TV, see the table below for common codes. If you have problems programming
your remote or need a dierent remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
To program your universal Insignia remote control to work with other devices in
the home, see your user guide or visit www.insigniaproducts.com.
Connecting a DVD or Blu-ray DVD player, cable box,
satellite receiver or, game station
Using HDMI (best)
Using component (better)
Using composite (good)
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN on the back of
your TV and the RF OUT jack on the antenna.
Connecting a Home Theater System
Using digital audio
Connecting power
Plug the AC power cord into a power outlet.
MENU
INPUT
CH
VOL
MENU
INPUT
CH
VOL
Remote
control sensor
Power
indicator
AUDIO/VIDEO OUT
Press to open the
on-screen menu.
Press to return to the
previous menu.
Press to select
menu options.
Press to conrm
a selection or to enter
a sub-menu.
Press to close the menu.
Press to move the cursor
on the screen or
to adjust a selected item.
19"/22" LED-LCD HDTV I QUICK SETUP GUIDE I NS-19E450A11/NS-19E450WA11/NS-22E450A11/NS-22E455C11
TV
HDMI 1
HDMI 2
HDMI 3
USB
Input Source
Component/AV
VGA
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
PICTURE
Mode
Brightness
Contrast
Color
Tint
Sharpness
Custom
70
40
60
0
40
Adjust settings to affect picture quality
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
SETTINGS
Set various TV options
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
USB
Adjust USB options
Photo
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
CHANNELS
Adjust channel options
Off
Channel Strength
Audio Only
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Turning on your TV for the rst time
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries.
• Connected an antenna, cable TV, or satellite TV.
• Connected the power cord.
2 Press (power) on the remote control to turn on your TV. The Choose your
menu language screen opens. Press ▲ or ▼ to highlight the language you
want, then press ENTER. The Choose your Time Setting screen opens.
3 Press ▲ or ▼ to highlight Mode, then press ◄ or ► to select Manual (to set
the date and time manually) or Auto (to set the date and time automatically
from a TV signal source based on the time zone your select).
4 Press ▲ or ▼ to highlight Time Zone, then press ◄ or ► to select your time
zone. You can select Eastern, Central, Mountain, Pacic, Alaska, Hawaii,
Atlantic, or Newfoundland.
5 Press ▲ or ▼ to highlight Daylight Savings, then press ◄ or ► to select On (if
your viewing area observes Daylight Savings Time) or O (if your viewing area
does not observe Daylight Savings Time).
NOTE: If you selected Manual for Mode, the time zone and Daylight Savings
options are grayed out and cannot be selected.
6 If you selected Manual for Mode, set the date by pressing ▲ or ▼ to highlight
Year, Month, or Day, then press ◄ or ► to adjust the setting.
7 If you selected Manual for Mode, set the time by pressing ▲ or ▼ to highlight
Time, then pressing ◄ or ► to select the hour, minute, or AM/PM eld. Press
▲ or ▼ to select. Press ENTER.
8 The Choose your Picture Mode screen opens. Press ▲ or ▼ to highlight Home
Mode or Retail Mode, then press ENTER. If you selected Retail Mode, a
message appears “If you select Retail Mode, then Energy saving is not realized.”
Select Ye s to continue, or No to change your selection.
Two-year limited warranty
See your User Guide or visit
www.insigniaproducts.com for details.
Need additional help?
See your User Guide! This comprehensive
guide includes everything from basic
how-to steps to more advanced features.
Check out our online community forum
at www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289 (U.S./Canada markets)
01 800-926-3000 (Mexico market)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA
55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485,
Segundo Piso, Colonia Cruz Manca, Programa Parcial
de Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito
Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY
Solutions, Inc. Registered in some countries. All other
products and brand names are trademarks of their
respective owners.
ENGLISH 10-0506
Press to
change the
volume.
Press to
change the
channel.
9 The Choose your TV source screen opens.
Press ▲ or ▼ to highlight Antenna,
Cable, or Cable/Satellite Box (if your
cable TV uses a box, select
Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for
channels available in your viewing area.
If you chose Cable/Satellite box, your
TV does not need to scan for channels.
During auto channel search, your TV
searches for digital channels rst. When the digital channel search is complete,
a message appears asking if you want to search for analog channels. Select Yes
to continue searching for analog channels, or select No to stop searching for
channels.
10 To watch TV, press INPUT, press ▲ or ▼ to highlight TV in the Input Source list,
then press ENTER.
Selecting the video input source
• Press INPUT, press ▲ or ▼ to highlight a source, then press ENTER. You can
also press any of the video source buttons directly.
Adjusting the volume
• Press VOL+ or VOL- to change the volume.
• Press MUTE to turn o the sound.
Selecting a channel
• To move to a dierent channel in the channel list, press CH or CH .
OR
• Enter the channel number directly using the number buttons.
Viewing channel information
• Press INFO to view an information banner. The information banner
shows the current program information such as channel number, video input
source, and resolution.
• Digital mode information—Displays the channel number, station name,
channel label, broadcast program name, TV rating, signal type, audio
information, resolution, CC mode, current time, and current program start and
end times.
• Analog mode information—Displays channel number, channel label (if
preset), signal type, audio information, and resolution.
• Press GUIDE to show the digital program guide, which may view a list of
available programs, program times, and program summaries, depending on
the information provided by the broadcaster.
On-screen menu overview
PICTURE menu (TV mode) AUDIO menu (TV mode)
CHANNELS menu (TV mode) SETTINGS menu (TV mode)
USB menu (USB mode)
Navigating menus with your remote control
  • Page 1 1
  • Page 2 2

Insignia NS-19E450A11 Quick setup guide

Insignia
Brand
Insignia
Model
NS-19E450A11
Category
LCD TVs
Type
Quick setup guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents