Samsung LN32R51B User manual

Category
LCD TVs
Type
User manual
BN68-00972A-01
IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V.
Vía Lopez Portillo No. 6,
Col. San Fco. Chilpan
Tultitlán, Estado de México, C.P. 54940
TEL. 01-55-5747-5100 / 01-800-726-7864
EXPORTADO POR: Samsung Electronics CO.,LTD.
416, Mae tan-3dong, Yeongtong - gu,
Suwon City, Gyeonggi-do Korea
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
LN32R51B
BN68-00972A-01COVER.qxd 11/11/05 12:04 AM Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-00972A-01Eng.qxd 11/12/05 12:33 AM Page 1
Contents-1
CONTENTS
Chapter 1: General Information
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . 2
Buttons on the Lower-Right Part of the Panel . . . . . . . . . . . . . . . 2
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . 6
If the remote control doesn’t work . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 2: Connections
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 7
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . . . . 7
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . . . . . 8
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting to a Cable Box that Descrambles All Channels . . . . . 9
Connecting to a Cable Box that Descrambles Some Channels . . . 9
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting a Digital TV Set-top box . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting an Amplifier/DVD Home Theater . . . . . . . . . . . . . . . . 15
Connecting a DVD/Set-top box via DVI . . . . . . . . . . . . . . . . . . . . . 16
Connecting a DVD/Set-top box via HDMI . . . . . . . . . . . . . . . . . . . 17
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 3: Operation
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Number Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the PRE-CH Button to select the Previous Channel . . . . . 19
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . . . 24
Storing Channels in Memory (Automatic Method) . . . . . . . . . . 25
Adding and Erasing Channels (Manual Method) . . . . . . . . . . . . 26
To Select the Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To Edit the Input Source Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 4: Picture Control
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DNIe (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . . 35
BN68-00972A-01Eng.qxd 11/12/05 12:33 AM Page 2
Contents-2
CONTENTS
My Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Easy Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Detail Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Dynamic Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Brightness Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . . . 41
Swapping the Contents of the PIP and Main image . . . . . . . . . . 41
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing the Size of the PIP Window . . . . . . . . . . . . . . . . . . . . 42
Changing the Position of the PIP Window . . . . . . . . . . . . . . . . . 42
PIP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 5: Sound Control
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting the TruSurround XT (SRS TSXT) . . . . . . . . . . . . . . . . . . . . 45
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . 46
Automatic volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Selecting the Internal Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Selecting the Main or Sub (PIP) Sound . . . . . . . . . . . . . . . . . . . . . . 49
Chapter 6: Channel Control
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 7: PC Display
Using Your TV as a Computer (PC) Display . . . . . . . . . . . . . . . . . . 51
Setting Up Your PC Software (Based on Windows XP) . . . . . . . 51
How to Auto Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting the Screen Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Changing the Screen Position . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Initializing the Screen Position or Color Settings . . . . . . . . . . . . 55
Chapter 8: Time Setting
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Chapter 9: Function Description
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Activating the child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selecting the Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Chapter 10: Troubleshooting
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Appendix
Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Disconnecting the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Installing the Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Using the Anti-Theft Kensington Lock . . . . . . . . . . . . . . . . . . . . . . 71
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . 71
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
BN68-00972A-01Eng.qxd 11/12/05 12:33 AM Page 3
English-1
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
List of Features
Excellent Picture Quality
- DNIe technology provides life-like clear images.
- My Color Control: Colors can be set to your preference by adjusting pink, blue and green.
-Dynamic Contrast: Automatically detects the input visual signal and adjusts to create
optimum contrast.
- Brightness Sensor: Adjusts the screen brightness automatically depending on the
brightness of the surrounding environment.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Convenience
- The TV utilizes the HDMI system to implement perfect digital sound and picture quality.
- The Anynet system enables you to easily control Samsung audio-video (AV) devices from
this TV.
Chapter 1
GENERAL INFORMATION
Remote Control
& Batteries (AAA x 2)
Cover-Bottom
Stand
Antenna Adaptor
(Argentian only)
Owner’s
Instructions
Power Cord
Anynet AV
Owner’s
Instructions
Cleaning Cloth
Anynet Cable
Stand Screw x 4
M4 X L16
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 1
English-2
Familiarizing Yourself with Your New TV
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the
on-screen menu. To use the more advanced features, you must use the remote control.
GENERAL INFORMATION
SOURCE
Displays a menu of all of the available
input sources (TV, AV1, AV2, S-Video,
Component 1, Component 2, PC, HDMI).
In the on-screen menu, use this button as you
use the ENTER button on the remote control.
MENU
Press to see an on-screen menu of
your TV’s features.
VOL +
Press to decrease or increase the volume.
In the on-screen menu, use the
VOL +
buttons as you use the and buttons on
the remote control.
CH
Press to change channels.
In the on-screen menu, use the CH buttons
as you use the and buttons on the remote
control. (Without the Remote Control, You can
turn on TV by using the Channel buttons.)
(POWER)
Press to turn the TV on and off.
POWER INDICATOR
Blinks and turns off when the power is on and
lights up in stand-by mode.
LIGHT DETECTING SENSOR
Adjusts the brightness of the screen
automatically by detecting brightness of the
surrounding environment. This sensor works
when the Brightness Sensor is on.
REMOTE CONTROL SENSOR
Aim the remote control towards this spot
on the TV.
SPEAKERS
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 2
English-3
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously such as a VCR or a DVD player.
For more information on connecting equipment, see pages 7-18.
GENERAL INFORMATION
COMPONENT IN 1, 2
Connect component video/audio from a
DVD/Set-top box.
PC IN
Connect to the video and audio output jack
on your PC.
SERVICE
Connector for service only.
AV IN
Video and audio inputs for external
devices, such as a camcorder or VCR.
S-VIDEO IN
Video inputs for external devices with an
S-Video output, such as a camcorder or VCR.
Anynet
Refer to “Anynet AV Owner’s Instructions”.
HEADPHONE JACK
Connect a set of external headphones for
private listening.
HDMI/DVI IN
Connect to the HDMI jack of a device with
HDMI output.
Use the HDMI/DVI terminal for DVI connection
to an external device. You should use the
DVI-to-HDMI cable or DVI-HDMI Adapter
for the connection, and the ‘R -AUDIO -L
terminal on DVI-IN for sound output.
(HDMI/DVI IN terminal does not support PC.)
AUDIO OUT
Connect to the audio input jack on your amplifier.
ANT IN
Connect to an antenna or to a cable TV system.
POWER INPUT
Connect the supplied power cord.
KENSINGTON LOCK
Refer to “Using the Anti-Theft Kensington Lock”
on page 71.
Speaker Audio Out
RF AV, S-Video
Component, PC, HDMI
RF
AV, S-VIDEO Component, PC, HDMI
Internal Mute Off
Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
Internal Mute On
Mute Mute Mute Sound Output Sound Output Sound Output
Video No Signal
Mute Mute Mute Mute Sound Output Sound Output
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 3
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
When using the remote, always point it directly at the TV.
POWER
Turns the TV on and off. (See page 19)
STILL
Press to stop the action during a particular scene.
Press again to resume normal video. (See page 34)
NUMBER BUTTONS
Press to change the channel.
+100
Press to select channels over 100. For example,
to select channel 121, press “+100”, then press “2”
and “1”. (See page 19)
MUTE
Press to temporarily cut off the sound. (See page 20)
MENU
Displays the main on-screen menu. (See page 21)
CAPTION
Controls the caption decoder.
(See page 63)
PIP
Picture-in-Picture ON/OFF.
(See page 40)
SLEEP
Press to select a time for the TV to turn off
automatically. (See page 57)
PRE-CH
Tunes to the previous channel. (See page 19)
CH and CH (Channel UP/Down)
Press CH or CH to change channels.
(See page 19)
VOL + and VOL -
Press to increase or decrease the volume.
(See page 20)
SOURCE
Press to display all of the available video sources.
(See page 27)
INFO
Use to see information on the current broadcast.
(See page 21)
EXIT
Press to exit the menu.
UP / DOWN / LEFT / RIGHT / ENTER
Use to select on-screen menu items and change menu
values.
English-4
GENERAL INFORMATION
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 4
English-5
GENERAL INFORMATION
Anynet
Press the Anynet button to bring up the Anynet menu.
(Refer to “Anynet AV Owner’s Instructions”.)
S.MODE
Adjusts the TV sound by selecting one of the preset
factory settings (or selects your personal, customized
sound settings). (See page 43)
MTS
(Multi channel Television Stereo)
Press to choose stereo, mono or Separate Audio
Program (SAP broadcast). (See page 46)
AUTO PROG.
Press to automatically store selected TV/Cable channels.
(See page 25)
ADD/DEL
Use to store and delete channels to/from memory.
(See page 26)
DNIe
DNIe Demo On/Off.
Off : DNIe Demo mode is deactivated.
On : The right-hand side of the screen shows the improved
DNIe image.
The left-hand side of the screen shows the original
image.(See page 35)
VCR/DVD Functions
(Anynet mode only)
- Rewind - Stop
- Play/Pause - Fast Forward
SRS
Selects TruSurround XT mode. (See page 45)
P.MODE
Adjusts the TV picture by selecting one of the preset
factory settings. (See page 29)
P.SIZE
Press to change the screen size. (See page 33)
PC
Press to switch to the PC mode. (See pages 52~55)
SWAP
Press to interchange the main picture and the sub (PIP)
picture. (See page 41)
SIZE
Press to make the PIP window small, double1, double2.
(See page 42)
POSITION
Press to select the position of sub (PIP) picture.
(See page 42)
RESET
When your remote does not work, change the batteries
and press the RESET button for 2-3 seconds before use.
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 5
Installing Batteries in the Remote Control
English-6
GENERAL INFORMATION
3
Replace the cover.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
2
Install two AAA size
batteries.
Make sure to match the “+” and
” ends of the batteries with the
diagram inside the compartment.
1
Slide the cover out
completely.
If the remote control doesn’t work
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 6
English-7
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on the next page.
If you have two antennas, see “Separate
VHF and UHF Antennas” on the next page.
Chapter 2
CONNECTIONS
Antennas with 300-ohm Flat Twin Leads (Argentina only)
- Not available in all locations.
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on a 300-75
ohm adapter
(not supplied).
Use a screwdriver to
tighten the screws.
2
Plug the adapter into
the ANT IN terminal
on the back of the TV.
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 7
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming
cable into the
ANT IN terminal
on back of the TV.
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
CONNECTIONS
English-8
2
Plug the combiner into
the ANT IN terminal on
the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adapter (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
ANT IN
UHF
VHF
UHF
VHF
Antennas with 75-ohm Round Leads
1
Plug the antenna lead
into the ANT IN
terminal on the back
of the TV.
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 8
English-9
CONNECTIONS
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
2
Connect the other end
of this cable to the
ANT IN terminal on
the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
ANT IN
ANT OUT
ANT IN
2
Connect this cable
to a two-way splitter.
Incoming
cable
Splitter
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 9
5
Connect another
cable between the
other OUT terminal on
the splitter and the
A–IN terminal on the
RF (A/B) switch.
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the ANT IN terminal on
the rear of the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English-10
CONNECTIONS
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
TV Rear
ANT IN
4
Connect an RF cable
between the ANT OUT
terminal on the cable
box and the B–IN
terminal on the A/B
switch.
3
Connect an RF cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 10
English-11
CONNECTIONS
Connecting a VCR
These instructions
assume that you
have already
connected your TV
to an antenna or a
cable TV system
(according to the
instructions on
pages 7-10).
Skip step 1 if you
have not yet
connected to an
antenna or a cable
system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANT IN terminal on the
back of the VCR.
3
Connect an RF cable
between the ANT OUT
terminal on the VCR
and the ANT IN terminal
on the TV.
VCR Rear Panel
TV Rear Panel
RF Cable (Option)
VCR Rear Panel
Incoming Cable
or Antenna
4
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
5
Connect a video cable
between the
VIDEO OUT jack on the
VCR and the AV IN
[VIDEO] jack on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
*
Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left
and right audio input jacks of the TV.
TV Rear Panel
RF Cable (Option)
Audio Cable (Option)
VCR Rear Panel
TV Rear Panel
RF Cable (Option)
Audio Cable (Option)
Video Cable (Option)
VCR Rear Panel
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 11
English-12
CONNECTIONS
3
Connect an S-Video cable
between the
S-VIDEO OUT jack on the
VCR and the S-VIDEO IN
jack on the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
*
Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
1
To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
2
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
TV Rear Panel
RF Cable (Option)
VCR Rear Panel
TV Rear Panel
RF Cable (Option)
Audio Cable (Option)
S-Video Cable (Option)
Audio Cable (Option)
VCR Rear Panel
TV Rear Panel
RF Cable (Option)
VCR Rear Panel
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 12
English-13
CONNECTIONS
Connecting a Camcorder
The rear panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1
Connect an audio cable
between the AV IN
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
2
Connect a video cable
between the AV IN
[VIDEO] (or S-VIDEO IN)
jacks on the TV and the
VIDEO OUT jacks on the
camcorder.
S-Video Cable (Option)
Audio Cable (Option)
or Video Cable (Option)
TV Rear Panel
Audio Cable (Option)
Camcorder
Camcorder
TV Rear Panel
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 13
English-14
CONNECTIONS
Note: For an explanation of Component video, see your DVD player owner's manual.
Be sure to match the component video and audio connections. For example,
if connecting the video cable to Component In 1, connect the audio cable to
Component In 1 also.
*
Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect an audio cable
between the
COMPONENT IN 1 or
COMPONENT IN 2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the DVD player.
2
Connect a component
cable between the
COMPONENT IN 1 or
COMPONENT IN 2
[PR, PB, Y] jacks on the
TV and the COMPONENT
[Y, PB, PR] jacks on the
DVD player.
Audio Cable (Option)
Component Cable (Option)
DVD Player Rear Panel
TV Rear Panel
Audio Cable (Option)
DVD Player Rear Panel
TV Rear Panel
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 14
English-15
CONNECTIONS
Note: For an explanation of Component video, see your Set-top box owner's manual.
*
Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
Connecting a Digital TV Set-top box
The connections for a typical Set-top box are shown below.
1
Connect an audio cable
between the
COMPONENT IN 1
or
COMPONENT IN 2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the Set-top box.
2
Connect a component
cable between the
COMPONENT IN
1 or
COMPONENT IN
2
[PR, PB, Y] jacks on the
TV and the
COMPONENT [Y, PB, PR]
jacks on the Set-top box.
Audio Cable (Option)
Component Cable (Option)
Set-Top Box Rear Panel
TV Rear Panel
Audio Cable (Option)
Set-Top Box Rear Panel
TV Rear Panel
Connecting an Amplifier/DVD Home Theater
1
Connect an audio cable
between the AUDIO OUT
[R-AUDIO-L] jacks on the
TV and the AUDIO IN
jacks on the Amplifier/
DVD Home Theater.
Audio Cable (Option)
Amplifier/DVD Home Theater
TV Rear Panel
* When connecting an external device, match the color of the connection terminal to the cable.
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 15
English-16
CONNECTIONS
1
Connect a DVI-to-HDMI
cable or DVI-HDMI
adapter between the
HDMI/DVI connector on
the TV and the DVI
connector on the DVD
player/Set-top box.
2
Connect an audio cable
between the DVI IN
[R-AUDIO-L] jack on the
TV and the AUDIO OUT
jacks on the DVD
player/Set-top box.
Connecting a DVD/Set-top box via DVI
This can be applied only if there is the DVI Output connector on the external device.
DVI-to-HDMI Cable (Option)
DVI-to-HDMI Cable (Option)
DVD Player Rear Panel
TV Rear Panel
Audio Cable
(Option)
DVD Player Rear Panel
TV Rear Panel
* When connecting an external device, match the color of the connection terminal to the cable.
BN68-00972A-01Eng.qxd 11/12/05 12:34 AM Page 16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78

Samsung LN32R51B User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI