AL-KO PURE Luftentkeimer User manual

Page is loading ...

Original operating instructions

Translation of the original operating instructions 27

Original operating instructions

Contents

9 About this handbook.................................................................................................... 29

9.1 Explanation of symbols................................................................................................... 29

9.2 Directives......................................................................................................................... 29

9.3 Term definitions...............................................................................................................29

10 Important information regarding your safety.............................................................30

10.1 Designated use............................................................................................................... 30

10.2 Foreseeable misuse........................................................................................................30

10.3 General safety notes.......................................................................................................30

11 Technical data............................................................................................................... 32

12 Product description...................................................................................................... 33

12.1 EC Declaration of Conformity......................................................................................... 34

12.2 Illumination and colour selection.....................................................................................35

12.3 3-stage filter cartridge..................................................................................................... 35

12.4 Plasma electrode.............................................................................................................35

12.5 VOC sensor.....................................................................................................................35

12.6 Fan...................................................................................................................................35

12.7 Pre-filter........................................................................................................................... 35

12.8 Timer................................................................................................................................35

12.9 Service display and filter replacement............................................................................35

13 First use of your AL-KO PURE....................................................................................36

13.1 Before first use................................................................................................................36

13.2 Scope of delivery............................................................................................................ 36

13.3 Assembly......................................................................................................................... 36

13.4 Inserting the 3-stage filter cartridge................................................................................ 37

13.5 Setting up the machine................................................................................................... 37

14 Operation........................................................................................................................38

14.1 Overview of the operating element.................................................................................38

14.2 Turning the machine on/off.............................................................................................38

14.3 Setting the fan.................................................................................................................38

14.4 Setting colours.................................................................................................................40

14.5 Setting the brightness..................................................................................................... 41

14.6 Setting the timer..............................................................................................................42

14.7 Measuring the air quality.................................................................................................43

14.8 Manually adjusting the air quality sensor....................................................................... 43

en

AL-KO PURE

28 3400857_a

14.9 Service LED.................................................................................................................... 44

15 Maintenance and care...................................................................................................45

15.1 Cleaning...........................................................................................................................45

15.2 Maintenance intervals..................................................................................................... 45

15.3 Replacing 3-stage filter cartridges.................................................................................. 46

15.4 Replacing pre-filters........................................................................................................ 46

15.5 Troubleshooting...............................................................................................................47

15.6 Error codes and error description...................................................................................47

15.7 Order numbers and replacement parts...........................................................................48

16 General information...................................................................................................... 49

16.1 Transport......................................................................................................................... 49

16.2 Disposal........................................................................................................................... 49

16.3 Warranty.......................................................................................................................... 49

16.4 Guarantee........................................................................................................................49

16.5 Certificates.......................................................................................................................49

16.6 Service.............................................................................................................................50

16.7 Copyright......................................................................................................................... 50

About this handbook

Translation of the original operating instructions 29

9 About this handbook

9.1 Explanation of symbols

CAUTION!

Following these safety warnings carefully can prevent personal injury and/or material damage.

ADVICE

Special instructions for greater ease of understanding and improved handling.

9.2 Directives

This machine corresponds to the following directives and standards:

2006/95/EC Low-Voltage Directive

2004/108/EC Electromagnetic Compatibility

DIN EN 60335-1

Household and similar electrical appliances - Safety -

Part 1: General requirements

DIN EN 60335-2-65

Household and similar electrical appliances - Safety -

Part 2-65: Particular requirements for air-cleaning appliances

DIN EN 55014-1

Electromagnetic compatibility - Requirements for household appliances,

electric tools and similar apparatus - Part 1: Emission

DIN EN 55014-2

Electromagnetic compatibility - Requirements for household appliances,

electric tools and similar apparatus -

Part 2: Immunity - Product family standard

DIN EN 62233

Measurement methods for electromagnetic fields of household appliances

and similar apparatus with regard to human exposure

9.3 Term definitions

VOC (volatile organic compounds) are harmful evaporation emissions from products that surround us in

interior spaces, in the office or at home.

VOC sources include, for example, aerosol sprays, cleaning agents, disinfectants, furniture, carpets, hobby

accessories such as paint and glue, construction materials, dyes, solvents, nail polish, pesticides and even

air fresheners.

en

AL-KO PURE

30 3400857_a

10 Important information regarding your safety

10.1 Designated use

The machine may only be operated under the following conditions:

exclusively in living and office spaces without condensing moisture.

exclusively for air purification.

It is forbidden to cover the machine during operation.

Persons, including children aged 8 years and older, who due to their physical, sensory, or mental faculties

or lack of knowledge are not in the position to safety operate the machine may not use the machine without

supervision or training by a responsible person.

Children may not play with the machine.

Children may not clean or perform user maintenance on the machine without supervision.

10.2 Foreseeable misuse

Any use other than that defined under Designated use is considered improver use.

AL-KO THERM will not accept liability for the consequences of improper use.

The guarantee shall not apply for damages or defects caused by non-observance of the operating instruc-

tions.

10.3 General safety notes

Read and follow carefully the following safety instructions!

ADVICE

Read and follow the complete operating instructions before using the machine.

Keep the operating instructions available for users of the machine at all times.

DANGER!

Danger of fatal injury from electric shock!

An electric shock can result in serious and even fatal injuries.

Never operate a machine with damage or a damaged mains cable.

Damaged or defective mains cables may only be replaced by AL-KO THERM.

Make sure that the mains cable is not clamped or rubs against sharp edges.

Only connect the machine to a mains voltage according to the type plate. Other technical data

can be found in these operating instructions, "see Technical Data".

Never open and repair the machine yourself.

Repairs may only be performed by AL-KO THERM.

Never make modifications to the machine which are not described in these operating instruc-

tions.

The machine contains live electrical parts. Risk of fatal injury when opening the housing.

Only use original accessories.

Important information regarding your safety

Translation of the original operating instructions 31

DANGER!

Danger of fatal injury from electric shock!

Cleaning work can result in serious and even fatal injuries.

Disconnect the power plug from the socket before performing cleaning and maintenance work.

Never immerse the machine or mains cable in water or use wet cleaning.

WARNING!

Choking hazard due to small parts!

Small parts of the filter cartridge can be swallowed or lead to chocking.

Keep filter cartridges away from children.

Store filter cartridges in the closed packaging.

Never open filter cartridges.

en

AL-KO PURE

32 3400857_a

11 Technical data

Housing Stainless steel base plate

Stainless steel leg

Plastic outer shell

Power supply Voltage 230 V, 50 - 60 Hz

Output < 60 watts

Standby < 0.5 watts

Power connection Mains plug

Fan 1 - 5 selectable levels

Max. volume 130 m

3

/h

Noise level Fan level 1: 30 dbA

Fan level 3: 35 dbA

Fan level 5: 56 dbA

Filter Pre-filter: F7 for particles larger than 3 μm

3-stage filter: consisting of an active carbon filter, catalyst and EPA

filter for particles larger than 0.3 μm such as fine dust, bacteria, aller-

gens, VOC

Pre-filter service life: 3 - 6 months

3-stage filter service life: up to 3 years

Net weight Weight: 13 kg

Dimensions Height: 112 cm

Base plate: 32 cm

Ambient temperature Temperature range: 10 °C to 30 °C

Product description

Translation of the original operating instructions 33

12 Product description

Whether it's living areas, work areas, conference rooms or waiting rooms, the air in these spaces is filled with

dust, especially fine dusts that are harmful to your health. At the same time, there is also heavy exposure to

biological and chemical pollutants. Structural defects, materials, paints, wood preservatives and so-called

volatile organic compounds can all be the source. We want to feel good and remain productive. We all want

clean air without harmful fine dusts, without VOC exposure, unpleasant odours, as well as fewer infections

due to fewer bacteria and viruses, fewer unpleasant smells and fewer allergens in the kid's bedroom.

AL-KO PURE reliably removes fine dust, allergens, bacteria, odours, and VOC.

1

2

3

4

5

6

1 Head with LED ring

and operating unit

4 Fan

2 3-stage filter cart-

ridge

5 Electronics and

power supply

3 Plasma unit 6 Pre-filter

en

AL-KO PURE

34 3400857_a

12.1 EC Declaration of Conformity

Product description

Translation of the original operating instructions 35

12.2 Illumination and colour selection

You can adjust the colours and brightness of the LED ring according to your wishes to ensure a pleasant

ambience.

There are 10 colours to choose from as well as an automatic colour selection feature. The colours can be

customised by the user.

When selecting automatic colour selection, all colours will be softly displayed in sequence. There are 10

brightness levels to choose from.

12.3 3-stage filter cartridge

The filter cartridge is composed of the catalyst filter, active carbon filter and EPA filter. The EPA filter E11

ensures that fine dust, allergens, pollen and dust particles as small as 0.3 μm are filtered out.

12.4 Plasma electrode

The patented AL-KO plasma technology provides air treatment for the environmentally-friendly removal

of the smallest, gaseous, organic carbon compounds such as smoke molecules, viruses, bacteria, and

spores. Additional degradation reactions take place in the 3-stage filter. In the process, the plasma acts to

regenerate the 3-stage filter so that long service lives can be achieved for the 3-stage filter.

12.5 VOC sensor

The VOC sensor is a special sensor that automatically measures the contamination level in the air. The

VOC sensor has an automatic calibration feature.

12.6 Fan

The fan has 5 selectable levels as well as "AU" automatic mode. In automatic mode, the fan level adjusts

itself to the contamination level determined by the sensor.

12.7 Pre-filter

The F7 filter class pre-filter takes all contaminants, fine dusts and pollen larger than 3 μm out of the extracted

air and protects the next filter.

This enables long-lasting functionality.

12.8 Timer

You can select from 1-99 hours. The machine switches off after the desired time. Ideal for air purification

after leaving the flat or office.

12.9 Service display and filter replacement

The service LED on the control panel lights up when service is required.

en

AL-KO PURE

36 3400857_a

13 First use of your AL-KO PURE

13.1 Before first use

The machine was thoroughly checked and carefully packaged before leaving the factory.

If the packaging is damaged or open, check the machine for external damage immediately upon receipt.

Never operate a damaged machine. Please contact your supplier immediately in case of a complaint.

Please observe the technical data as well as the safety instructions before operating for the first time!

13.2 Scope of delivery

1x AL-KO PURE air purifier

1x 3-stage filter cartridge

2x Pre-filter

1x Pedestal

1x Fastening screw

1x Allen key

1x Operating instructions

13.3 Assembly

1 Remove the air purifier, pedestal, fastening

screw and Allen key from the packaging.

2 Guide the fastening screw through the pedestal

from the bottom.

➯

The assembly hole for the screw is counter-

sunk.

3 Use the Allen key to secure the pedestal to the

standpipe of the air purifier.

4 Place the assembled machine on the pedestal.

5 Remove the 3-stage filter cartridge from the

machine and remove the protective film. Remove

the transport locks on the top and bottom of the

3-stage filter cartridge.

6 Insert the 3-stage filter cartridge as per the follo-

wing instructions.

First use of your AL-KO PURE

Translation of the original operating instructions 37

13.4 Inserting the 3-stage filter cartridge

1

2

3

1 Operating unit 3 3-stage filter cart-

ridge

2 Spacer

1. Pull out the operating unit from the top.

➯

Fold the operating unit to the side.

2. Remove the transport lock of the filter cartridge.

3. Insert the filter cartridge.

➯

The three spacers of the filter cartridge must lock into the notches of the machine.

➯

The filter cartridge can only be locked into one position.

4. Re-insert the operating element into the machine from the top.

➯

The operating element can only be completely locked into one position.

➯

If the operating element is not locked completely, then the machine will not turn on.

13.5 Setting up the machine

1. Place the machine on a flat, stable surface.

➯

Do not place the machine on hot surfaces or in the vicinity of heat sources.

➯

Do not let liquids or foreign objects enter the machine (e.g. metallic objects).

2. Make sure that the air inlet (bottom) and the air outlet (top) are not blocked.

3. Plug the machine's mains cable into the outlet.

4. Your AL-KO PURE is now ready for operation.

ADVICE

We recommend that you first let the machine run overnight to ensure a basic purification of

your room.

en

AL-KO PURE

38 3400857_a

14 Operation

14.1 Overview of the operating element

Test

Service

h

1

10

9

5

4

3

2

7

6

8

1 Colour button 6 Air quality but-

ton/Service button

2 Brightness button 7 On/Off button

3 Fan button 8 Service LED

4 Timer button 9 "+" button

5 Display 10 "-" button

14.2 Turning the machine on/off

Test

Service

h

1

1 On/Off button

Press the On/Off button to turn the machine on or off.

➯

The machine will start using the last setting.

14.3 Setting the fan

Test

Service

h

4

3

2

1

1 Fan button 3 "+" button

2 Display 4 "-" button

Press the Fan button to set the fan.

➯

The Fan button illuminates.

Operation

Translation of the original operating instructions 39

Display

Notifications on the display Meaning

"0" Fan level 0. The fan is switched off.

"1 - 5" Fan level 1 - 5 is set.

"AU" Automatic mode is set.

Fan levels

Fan level Operating mode Application example

1-2

Ultra-quiet continual operation during the

night

Bedroom

3 Continual operation during the day Smaller rooms approx. 25 m

2

4 Continual operation during the day Larger rooms approx. 60 m

2

5 High-speed operation

Fast air purification or for extremely conta-

minated air.

AU Automatic mode

In automatic mode, the fan speed adjusts

itself to the contamination level determined

by the sensor.

Setting fan levels

You can set up to five fan levels as well as automatic mode "AU".

Selecting the fan level Press the "+" button to increase the fan level. Press and hold the "+"

button to increase the fan level automatically.

Press the "-" button to decrease the fan level. Press and hold the "-" but-

ton to decrease the fan level automatically.

Selecting automatic

mode

Press the "+" button until "AU" for automatic mode is shown on the dis-

play.

ADVICE

A sensor evaluates the air quality once the machine is turned on.

After the air quality evaluation, the automatic fan system adjusts the machine automatically. This

process can take up to 2 minutes.

When the machine is first put into operation, it takes approx. 48 hours before the automatic fan

system has been run-in for the general control scope.

Turning the fan on/off

Turning the fan off Press the fan button twice in succession to turn off the fan.

Turning on the fan Press the fan button twice in succession to turn the fan on.

➯

The fan will be set to the level last set.

en

AL-KO PURE

40 3400857_a

14.4 Setting colours

Test

Service

h

2

3

1

1 Colour button 3 "+" button

2 "-" button

Press the Colour button to set the colour.

➯

The Colour button illuminates.

Display

Notifications on the display Meaning

"0 - 10" Colour 0 - 10 is set.

"A1 - A9" Colour changes in X minutes through all colours.

Example: A3 = colour changes in 3 minutes through all colours.

Assignment of colour levels (factory setting)

Colour setting Colour Default value

0 White Cannot be changed

1 Red Can be changed

2 Green Can be changed

3 Blue Can be changed

4 Red yellow Can be changed

5 Yellow Can be changed

6 Yellow green Can be changed

7 Cyan Can be changed

8 Cyan blue Can be changed

9 Magenta Can be changed

10 Magenta red Can be changed

ADVICE

The colours can also be set when the brightness level is set to "0".

Operation

Translation of the original operating instructions 41

Selecting colour levels

You can set up to ten colours and up to nine colour change intervals.

Selecting colour levels 1 -

10

Press the "+" button to select the colour. Press and hold the "+" button

to change the colour automatically.

Press the "-" button to select the colour. Press and hold the "-" button to

change the colour automatically.

Selecting colour level 0 Press the Colour button twice in succession to select colour level "0".

Changing colour levels

You can manually assign colour levels 1 through 10 with any available colour.

1. Press and hold the colour button until it flashes.

2. Change the colour of the colour level by pressing the "+" or "-" button.

3. Re-press the colour button to save the colour to the respective number.

14.5 Setting the brightness

Test

Service

h

2

3

1

1 Brightness button 3 "+" button

2 "-" button

Press the Brightness button to set the brightness.

➯

The Brightness button illuminates.

Display

Notifications on the display Meaning

"0" The illumination is turned off.

"1 - 10" Brightness level 1 - 10 is set.

Setting the brightness level

You can set up to ten brightness levels.

Setting the brightness level Press the "+" button to increase the brightness level. Press and hold the

"+" button to increase the brightness level automatically.

Press the "-" button to decrease the brightness level. Press and hold the

"-" button to decrease the brightness level automatically.

en

AL-KO PURE

42 3400857_a

Turning the illumination on/off

Turning on the illumination Press the brightness button twice in succession to turn the illumination

on when it is turned off.

➯

The illumination will be set to the level last set.

Turning off the illumination Press the brightness button twice in succession to turn off the illumina-

tion.

14.6 Setting the timer

Test

Service

h

2

3

1

1 Timer button 3 "+" button

2 "-" button

Press the Timer button to set the timer.

➯

The Timer button illuminates.

Display

The timer is used to continue operating the machine for a set time. Once this time has elapsed, the machine

turns off automatically.

When the timer is set, the remaining time in hours is displayed. The display changes only upon the full hour,

i.e. "3" is displayed for hours 3.00 to 2.01. The display only changes to "2" when 2.00 hours is reached.

Notifications on the display Meaning

"0" The timer is reset.

"1 - 99" Remaining time 1 - 99 hours is set.

Setting the timer

You can set the timer to 1 through 99 hours.

Setting the remaining time Press the "+" button to increase the remaining time. Press and hold the

"+" button to increase the remaining time automatically.

Press the "-" button to decrease the remaining time. Press and hold the

"-" button to decrease the remaining time automatically.

Resetting the timer

Resetting the timer Press the Timer button twice in succession to reset the timer to "0".

Operation

Translation of the original operating instructions 43

14.7 Measuring the air quality

Test

Service

h

2

1

1 Air Quality button 2 LED ring

Press the Air Quality button to measure the air quality.

➯

The air quality will be displayed via the LED ring after approx. 10 seconds.

➯

The display shows "--"

Display of the air quality

Display Meaning

Red Poor air quality

Yellow Average air quality

Green Good air quality

14.8 Manually adjusting the air quality sensor

Test

Service

h

1

4

2

3

1 Display 3 "+" button

2 "-" button 4 Air Quality button

The air quality sensor adjusts automatically to the available air quality. This adjustment may take a con-

siderable time. The automatic system can be manually set to good air quality to accelerate the process.

1. Press the Air Quality button to manually adjust the air quality sensor.

2. While the air quality display is shown press both the "+" and "-" buttons at the same time.

➯

The air quality is manually adjusted and set to green. The display shows "CA".

en

AL-KO PURE

44 3400857_a

14.9 Service LED

Test

Service

h

1

2

3

1 Display 3 Service LED

2 Service button

Displaying error messages

Press the Service button twice in succession when the Service LED is lit.

➯

The error code is then shown on the display.

The description of the error code can be found under "Error codes and error description".

Filter replacement service display

The service display notifies you via error code when it is time to order and replace the 3-stage filter cartridge.

Maintenance and care

Translation of the original operating instructions 45

15 Maintenance and care

15.1 Cleaning

DANGER!

Danger of fatal injury from electric shock!

Cleaning work can result in serious and even fatal injuries.

Disconnect the power plug from the socket before performing cleaning and maintenance work.

Never immerse the machine or mains cable in water or use wet cleaning.

15.1.2 Air purifier

Only clean the outer shell and the base of the air purifier with a soft cloth and non-abrasive or non-corrosive,

household cleaning agent.

15.1.3 Pre-filter

Clean the pre-filter as required depending on the contamination level.

The pre-filter can be removed and then the dirt can be gently knocked, hoovered or blown out for cleaning.

15.2 Maintenance intervals

CAUTION!

Machine damage!

Using non-compatible replacement parts can damage the machine.

Only use original replacement parts from AL-KO.

Component Maintenance interval

Pre-filter Replace every 3 - 6 months.

3-stage filter cartridge Replace every 3 years at an average contaminate level.

The "Service LED" indicates when the filter cartridge must be

replaced.

A warning is displayed when approx. 10% operating hours are remaining, "see Service LED".

en

AL-KO PURE

46 3400857_a

15.3 Replacing 3-stage filter cartridges

1

2

3

1 Operating unit 3 3-stage filter cart-

ridge

2 Spacer

Removing 3-stage filter cartridges

1. Pull out the operating unit from the top.

➯

Fold the operating unit to the side.

2. Pull out the filter using the available handle.

Inserting 3-stage filter cartridges

1. Insert the filter cartridge.

➯

The three spacers of the filter cartridge must lock into the notches of the machine.

➯

The filter cartridge can only be locked into one position.

2. Re-insert the operating element into the machine from the top.

➯

The operating element can only be completely locked into one position.

ADVICE

The machine can only be turned on when the filter and operating element are completely locked

into place.

15.4 Replacing pre-filters

Two pre-filters are arranged around the machine base.

1

2

1

2

1 Pre-filter 2 Clip

Removing the pre-filter

1. Press the pre-filter clip in the direction of the machine base.

2. Pull out the operating unit from the bottom.

Page is loading ...

AL-KO PURE Luftentkeimer User manual

This manual is also suitable for

AL-KO PURE Luftentkeimer User manual

in other languages

Other documents