Symmons 3600-REB-TRM Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
Warranty
■ Limited Lifetime - to the original end purchaser in
consumer installations
■ 5 years - for commercial installations
Shower Valve System 3600
Specification Submittal
Duro
™
Location:
Model Numbers
3600
Shower Valve System with Symmons Temptrol
®
mixing valve p/n 4000-BODY
3600-TRM
Trim only, mixing valve ordered separately
3600-REB-TRM
Rebuild kit, Trim only, includes TA-10 ow control
spindle and TA-4 hot/cold seat
4000-BODY
Symmons Temptrol
®
mixing valve without trim
4000-X-BODY
Symmons Temptrol
®
mixing valve without trim.
Valve includes integral service stops to allow water
shut-o for service
Finish Options / Modifications
Append appropriate -sux to model number
-STN
Satin nickel
-
Polished chrome (standard nish)
Options / Modifications
Append appropriate -sux to model number
-IPS
1/2 inch female IPS connections on
Symmons Temptrol
®
mixing valve
-X
Integral service stops included with Temptrol
mixing valve to allow water shut-o for
service, p/n 4000-X-BODY (option only
applies when ordering model 3600)
-CHKS
Check Stops: Temptrol
®
mixing valve
includes integral check stops
(Requires integral service stops, sux -X
.
Used in installations where a positive shut-o
device is used downstream of mixing valve.)
-REV
Reverse core: Temptrol® mixing valve
with reverse core. (Requires integral service
stops, sux -X . Used in back-to-back system
installations. HOT on the right, COLD on the le)
-LW
Wide lever handle (chrome nish only)
Standards / Certifications
ASME A112.18.1-2005 / CSA B125.1-05
Americans with Disabilities Act (ADA) compliant
Feature Highlights
■ Symmons Shower Valve System with Symmons Temptrol
®
pressure-balancing mixing valve with adjustable stop screw
to limit handle turn
■ Screwless escutcheon
■ Lever style handle
■ Polished chrome nish (standard)
Print
Email
Reset Form
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800)796-6667 ■
Fax: (800)961-9621
nished wall
Floor
hot / cold
supply
showerhead
supply
7-1/2" sq
(191 mm)
Temptrol
control valve
valve mounting
plate,
*
Notes (1)(2)
COLD
supply
showerhead
supply
HOT
supply
Finished wall to rear of valve
3-1/2"
±
1/2" (89 mm
±
13 mm
Finished wall to pipe centerline
2-3/8"
±
1/2" (60 mm
±
13 mm)
*See note (2)
Wall cutout hole size
3-1/2" (89 mm) min
4" (101 mm) min
*
Notes:
(1) Walls for using T-177 mounting plate (MP)
■ Wall is 1/16" (2 mm) min • 1/2" (13 mm) max
■ Fiber or acrylic walls (MP required)
■ Plaster or other type walls 1/2" or less (MP optional)
■ Protective shield usage (optional)
(2) Dry wall, plaster or other type walls 1/2" or greater
■ Protective shield is required; snaps on end of valve spindle....
(3)
Do not install positive shut-off devices or devices that do not
allow the valve to ow at least 1.5 gpm on control valve outlets.
(4) Dimensions subject to change without notice
Protective Shield
p/n T-176
32"
(813 mm)
3-3/8" ± ½"
(85 mm ±13 mm)
3-1/8"
(80 mm)
Dimensions Duro Shower Valve System, 3600
-
1
-
2
Symmons 3600-REB-TRM Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Symmons Industries S-3501-CYL-B-BBZ-1.5-TRM Installation guide
-
Symmons 3605-H321-V-STN-TRM Installation guide
-
-
-
-
-
-
-
-