none 201570 Installation guide

Type
Installation guide

Thornton Arbor none 201570

The none 201570 is a versatile device that can be used for a variety of purposes. With its sturdy construction and easy assembly, it is perfect for both indoor and outdoor use.

The none 201570 is made of high-quality materials and is built to last. The frame is made of durable steel, and the top is made of weather-resistant wood. This makes it ideal for use in all types of weather conditions.

The none 201570 is also easy to assemble. The included instructions are clear and concise, and the assembly process can be completed in just a few minutes. Once assembled, the none 201570 is sturdy and stable.

Thornton Arbor none 201570

The none 201570 is a versatile device that can be used for a variety of purposes. With its sturdy construction and easy assembly, it is perfect for both indoor and outdoor use.

The none 201570 is made of high-quality materials and is built to last. The frame is made of durable steel, and the top is made of weather-resistant wood. This makes it ideal for use in all types of weather conditions.

The none 201570 is also easy to assemble. The included instructions are clear and concise, and the assembly process can be completed in just a few minutes. Once assembled, the none 201570 is sturdy and stable.

Attach Cleats to the Top Rails
Pilot holes have been provided in the top rails for easier assembly.
Position 4 top rails as shown. Secure the 5 top rail cleats to the
rails using the provided screws (fig. 1).
Attach Leg Assembly to Arbor Top
Slide the 2 posts of the leg frame assembly between the top rails.
Be sure the slats on the legs are positioned with the vertical slats
facing out. Secure the parts using the provided bolts, washers
and nuts (fig. 2).
Tools Needed
Power drill
Ratchet with 3/8" socket
3/8" wrench
Step 1
Step 2
fig. 2
NOTE: Do not completely tighten the screws until assembly has
been completed.
ThorntonTopAsm.ai
ThorntonTop.ai
fig. 1
Thornton.ai
NOTE: Make sure the arbor is square before tightening all
screws and bolts.
Completed Arbor
(Product code: 201570)
86"H x 67 1/8"W x 33"D
ThorntonParts.ai
A
B
C
D
E
F
G
DESCRIPTION ITEM QTY PART #
LEG FRAME ASSEMBLY A 2 AR40040-004
TOP RAIL B 4 AR40040-010
TOP RAIL CLEAT C 5 AR40040-011
MACHINE BOLT - ⅜ - 16 NC x 7" D 8 AR40040-D
FLAT WASHER - ⅜" ID x 1" OD E 16 AR40040-E
NO. 8 WOOD SCREW - 2½" LONG F 20 AR40040-H
HEX HEAD NUT - ⅜ - 16 NC G 8 AR40040-G
Parts Included
THORNTON ARBOR
INSTALLATION INSTRUCTIONS
UFP Thornton, LLC
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR
USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE
CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT,
INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT
PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2014 UFP Thornton, LLC. All rights reserved.
26200 Nowell Road, Thornton, CA, 95686 209.794.8750 www.ufpi.com 7851_8/14
INSTRUCCIONES PARA INSTALACIÓN
DE PÉRGOLA THORNTON
UFP Thornton, LLC
©2014 UFP Thornton, LLC. Todos los derechos reservados.
26200 Nowell Road, Thornton, CA, 95686 209.794.8750 www.ufpi.com 7851_8/14
Sujete los listones a los pretiles superiores
Se han hecho agujeros indicadores en los rieles superiores para
facilitar el armado. Coloque 4 pretiles superiores como se mues-
tra. Sujete los 5 listones de los pretiles superiores a los rieles
usando los tornillos incluidos (fig. 1).
Sujete el ensamblaje de la pata a la parte superior de la pérgola
Deslice los 2 postes del ensamblaje del bastidor de la pata entre
los pretiles superiores. Asegúrese de que las tiras de madera en
las patas estén colocadas con las tiras verticales volteando hacia
afuera. Sujete las partes utilizando los pernos, arandelas y tuercas
proporcionadas (fig. 2).
Herramientas Necesarias
Taladro eléctrico
Llave de trinquete con dado de 3/8"
Llave inglesa de 3/8"
Paso 1
Paso 2
fig. 2
NOTA: No apriete completamente los tornillos hasta que el armado
se haya terminado.
ThorntonTopAsm.ai
ThorntonTop.ai
Thornton.ai
NOTA: Aserese de que el árbol esté derecho antes de apretar todos
los tornillos y pernos.
Pérgola terminada
(digo de producto: 201570)
86"H x 67 1/8"W x 33"D
ThorntonParts.ai
A
B
C
D
E
F
G
DESCRIPCIÓN ARTÍCULO CANT PARTE #
ENSAMBLAJE DEL BASTIDOR
DE LA PATA
A 2 AR40040-004
PRETIL SUPERIOR B 4 AR40040-010
LISTÓN DEL PRETIL SUPERIOR C 5 AR40040-011
PERNO MAQUINADO - ⅜ - 16 NC x 7" D 8 AR40040-D
ARANDELA PLANA - ⅜" ID x 1" OD E 16 AR40040-E
NO. 8 TORNILLOS PARA MADERA - 2."
DE LARGO
F 20 AR40040-H
TUERCA HEXAGONAL - ⅜ - 16 NC G 8 AR40040-G
Partes Incluidas
LOS DIAGRAMAS E INSTRUCCIONES DE ESTE FOLLETO SON PARA FINES ILUSTRATIVOS SOLAMENTE Y NO ESTÁN DESTINADOS A REEMPLAZAR A UN PROFESIONAL MATRICULADO.
CUALQUIER CONSTRUCCIÓN O USO DEL PRODUCTO DEBEN ESTAR DE ACUERDO CON TODOS LOS CÓDIGOS LOCALES DE CONSTRUCCIÓN O DE ZONIFICACIÓN. EL USUARIO ASUME
TODOS LOS RIESGOS Y RESPONSABILIDADES ASOCIADOS CON LA CONSTRUCCIÓN O EL USO DE ESTE PRODUCTO. EL USUARIO O CONTRATISTA DEBEN TOMAR TODAS LAS MEDIDAS
NECESARIAS PARA GARANTIZAR LA SEGURIDAD DE TODAS LAS PERSONAS INVOLUCRADAS EN EL PROYECTO, INCLUIDO, ENTRE OTROS, EL USO DEL EQUIPO DE SEGURIDAD
APROPIADO. A EXCEPCN DE LO CONTENIDO EN LA GARANTÍA LIMITADA POR ESCRITO, EL GARANTE NO PROPORCIONA NINGUNA OTRA GARANTÍA, YA SEA EXPRESA O TÁCITA, Y
NO SERÁ RESPONSABLE DE NINGÚN DAÑO, INCLUIDOS DAÑOS CONSECUENTES.
  • Page 1 1
  • Page 2 2

none 201570 Installation guide

Type
Installation guide

Thornton Arbor none 201570

The none 201570 is a versatile device that can be used for a variety of purposes. With its sturdy construction and easy assembly, it is perfect for both indoor and outdoor use.

The none 201570 is made of high-quality materials and is built to last. The frame is made of durable steel, and the top is made of weather-resistant wood. This makes it ideal for use in all types of weather conditions.

The none 201570 is also easy to assemble. The included instructions are clear and concise, and the assembly process can be completed in just a few minutes. Once assembled, the none 201570 is sturdy and stable.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages