Datalogic QuickScan QBT24XX Quick Reference Manual

QuickScan™

QBT24XX

General Purpose Handheld

Area Imager Bar Code Reader

with Bluetooth® Wireless Technology

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

tents of this documentation or the procedures described

therein may be reproduced or transmitted in any form or by

any means without prior written permission of Datalogic ADC,

Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic

ADC”). Owners of Datalogic products are hereby granted a

non-exclusive, revocable license to reproduce and transmit

this documentation for the purchaser's own internal business

purposes. Purchaser shall not remove or alter any proprietary

notices, including copyright notices, contained in this docu-

mentation and shall ensure that all notices appear on any

reproductions of the documentation.

Should future revisions of this manual be published, you can

acquire printed versions by contacting your Datalogic repre-

sentative. Electronic versions may either be downloadable

from the Datalogic website (www.datalogic.com) or provided

on appropriate media. If you visit our website and would like

to make comments or suggestions about this or other Data-

logic publications, please let us know via the "Contact Data-

logic" page.

Disclaimer

Datalogic has taken reasonable measures to provide informa-

tion in this manual that is complete and accurate, however,

Datalogic reserves the right to change any specification at any

time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of

Datalogic S.p.A. in many countries, including the U.S.A. and

the E.U. All other brand and product names may be trade-

marks of their respective owners.

Patents

See www.patents.datalogic.com

for patent list.

This product is covered by one or more of the following pat-

ents:

Design Patents: EP002158717, ZL201330271434.1

Utility patents: EP0996284B1, EP0997760B1, EP0999514B1,

EP1128315B1, EP1396811B1, EP1413971B1, EP1828957B1,

JP4435343B2, US6478224, US6512218, US6513714,

US6561427, US6808114, US6997385, US7053954, US7075663,

US7234641, US7387246, US7721966, US8245926, US8561906

Quick Reference Guide i

Table of Contents

Software Product Policy ............................................................. vi

Customers Under Software Support ................................ vi

Description .................................................................................... 1

Setting Up the Reader ................................................................. 2

Locking the Reader to the Base ........................................ 2

To Lock the Reader in the Base................................ 2

Connecting the Base Station ...................................................... 4

Base Station Connection and Routing .............................. 4

System and Network Layout ............................................. 6

Typical Setup with Cradle and Host ......................... 6

Using the BC20xx™ Radio Base .......................................... 7

Radio Base LEDs ........................................................ 7

Charging the Batteries ....................................................... 8

Battery Safety ..................................................................... 8

Replacing the Battery Pack .............................................. 11

Using the Quickscan™ QBT24XX ............................................... 13

Linking the Reader .....................................................................14

Link Datalogic RF Devices to Base......................... 14

Linking to a Bluetooth Adapter in

Serial Port Profile Mode .......................................... 14

Linking to a Bluetooth Adapter in HID mode........ 15

Variable PIN Code .................................................... 16

HID Alt Mode ......................................................................17

Power Off ...........................................................................17

Country Mode ....................................................................18

Caps Lock State .................................................................22

Selecting the Base Interface Type ............................................23

Interface Selection ............................................................23

Configuring the Interface ........................................ 23

Keyboard Interface .................................................. 25

Scancode Tables....................................................... 27

Numlock.................................................................... 28

Programming ..............................................................................29

Using Programming Bar Codes .......................................29

Configure Other Settings ..................................................29

Resetting Standard Product Defaults ............................30

Reading Parameters .................................................................. 30

Aiming System .................................................................. 30

Good Read Green Spot Duration .....................................31

Scan Modes ................................................................................32

Pick Mode ...........................................................................34

Multiple Labels in a Volume ............................................34

ii QuickScan™ QBT24XX

Technical Specifications ............................................................35

LED and Beeper Indications ......................................................39

Error Codes .................................................................................41

Base Station Indications ...........................................................41

Regulatory Information .............................................................42

Statement of Agency Compliance ...................................42

FCC Class B Compliance Statement ................................42

FCC RF Radiation Exposure Statement................. 43

Canadian Notice ................................................................43

Power Supply .....................................................................44

Imager Labeling ................................................................. 44

WEEE Statement ...............................................................46

Datalogic ADC Limited Factory Warranty .......................47

Warranty Coverage .................................................. 47

Warranty Claims Process........................................ 47

Warranty Exclusions................................................ 48

No Assignment ........................................................ 49

Risk of Loss .............................................................. 49

Ergonomic Recommendations ................................................. 50

Cleaning .......................................................................................51

Services and Support .................................................................52

Products .............................................................................52

Service & Support .............................................................. 52

Contact Us ..........................................................................52

Hex-Numeric Keypad .................................................................53

For HID Variable Pin Code only............................... 55

Quick Reference Guide iii

DATALOGIC ADC, INC.

END USER SOFTWARE LICENSE AGREEMENT (EULA)

FOR THE QUICKSCAN™ QBT24XX

Notice to End User: There are two types of software covered by this END USER

LICENSE AGREEMENT ("EULA"): (1) The Datalogic Product you have acquired con-

tains embedded software ("Embedded Software") which is integral to the Product's

operation; and (2) Optional Application Software provided to you on an optional

basis ("Application Software"). Embedded Software and Application Software are

collectively referred to as "Software" and are subject to the terms and conditions

contained in this EULA. Software is provided only for use with, and for authorized

end users of, the Datalogic QuickScan™ QBT24XX ("Product"). Portions of the

Embedded Software include or operate with Open Source software or libraries

("Open Source"). Use of Open Source is subject to the Open Source licenses entitled

"QBT-QM24XX .zip License File .pdf" available at the following website: http://

www.datalogic.com/software_lan_sb2783_1.html.

This EULA (End User Software License Agreement) ("EULA” or "Agreement") is a

legally binding agreement governing the licensing of the Software and Documen-

tation by Datalogic ADC, Inc. and its subsidiaries and affiliates ("Datalogic") to the

entity or person who has purchased or otherwise acquired a Datalogic Product

("End User"). For purposes of this Agreement, any software that is not Embedded

Software or Application Software is software associated with a separate end-user

license agreement is licensed to you under the terms of that license agreement.

Datalogic and End User hereby agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that

controls, is controlled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference

guides, quick reference guides, manuals, or similar materials associated with

or related to the Datalogic Product, whether in printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, docu-

mentation, and any related internal design, system design, data base design,

algorithms, technology, technical data or information, implementation tech-

niques, and trade secrets related to the Software, (b) any other trade secrets

marked appropriately or identified as proprietary or confidential, and (c) any

information that End User, under the circumstances, should recognize as con-

fidential. Proprietary Information does not include any information that the

receiving party can establish was (1) in the public domain, (2) already in the

receiving party's possession or rightfully known prior to receipt, (3) rightfully

learned from a third party not in violation of any other's proprietary rights, or

(4) independently developed without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® QuickScan™ series scanner product,

including all embedded Software in and all Documentation related to such

product, which has been purchased or otherwise acquired by End User,

whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third

party licensors in machine readable form which is embedded in the Datalogic

Product, whether obtained directly or indirectly from Datalogic, including any

replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual

license to use the Software, solely on the Datalogic Product in which it is

embedded ("designated Datalogic Product"), in machine-readable form only,

solely for End User's internal business purposes. This Agreement does not

convey ownership of the Software to End User. Title to the Software shall be

and remain with Datalogic or the third party from whom Datalogic has

obtained a licensed right. As used in this Agreement, the term "purchase" or

its equivalents when applied to the Software shall mean "acquire under

license." End User is not entitled to receipt or use of the source code to any

Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or

otherwise reproduce or remanufacture the Software, whether modified or

unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise

transfer the Software to any other person or organization, for purposes other

than as expressly provided in this Agreement, without Datalogic's prior written

consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering,

electronic transfer, or other use of the Software on other than the designated

iv QuickScan™ QBT24XX

Datalogic Product will be a material breach of this Agreement. However, Data-

logic may elect not to terminate this Agreement or the granted licenses, but

instead may elect to notify End User that End User is deemed to have ordered

and accepted a license for each breaching use. End User shall pay Datalogic

the applicable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or other-

wise transfer the Datalogic Product to any third party unless such third party

agrees with Datalogic in writing to be bound by the terms and conditions of

this Agreement. Any such transfer of the Datalogic Product absent such

agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's stan-

dard support fees and under Datalogic's standard support terms and condi-

tions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of

Datalogic or Datalogic's third party licensors and that the Software is protected by

intellectual property laws and treaties. The license set forth in this Agreement

does not transfer to End User any ownership of Datalogic's or its third party licen-

sors' copyrights, patents, trademarks, service marks, trade secrets, or other intel-

lectual property rights and End User shall have no right to commence any legal

actions to obtain such rights. End User shall not remove, modify, or take any other

action that would obscure any copyright, trademark, patent marking, or other

intellectual property notices contained in or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, pro-

prietary, and trade secret property of Datalogic and Datalogic's third party

licensors and End User acquires no right or interest in any Proprietary Infor-

mation.

5.2 End User shall not disclose, provide, or otherwise make available the Propri-

etary Information of Datalogic or its third party licensors to any person other

than End User's authorized employees or agents who are under confidentiality

agreement, and End User shall not use the Proprietary Information other than

in conjunction with use of the Datalogic Product exclusively for End User's

internal business purposes. End User shall take steps to protect the Propri-

etary Information no less securely than if it were End User's own intellectual

property.

5.3 The provisions of this Proprietary Information Section shall survive and con-

tinue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Prod-

uct will conform substantially to the applicable Documentation for the period

specified in the Documentation. During this period, for all reproducible non-

conformities for which Datalogic has been given written notice, Datalogic will

use commercially reasonable efforts to remedy nonconformities verified by

Datalogic. End User agrees to supply Datalogic with all reasonably requested

information and assistance necessary to help Datalogic in remedying such

nonconformities. For all defects reported to Datalogic within the warranty

period, Datalogic's liability is limited to providing End User with one copy of

corrections or responding to End User's problem reports according to Data-

logic's standard assistance practices. Datalogic does not warrant that the

product will meet End User's requirements or that use of the product will be

uninterrupted or error free, or that Datalogic's remedial efforts will correct any

nonconformance. This limited warranty does not cover any product that have

been subjected to damage or abuse, whether intentionally, accidentally, or by

neglect, or to unauthorized repair or unauthorized installation, and shall be

void if End User modifies the product, uses the product in any manner other

than as established in the Documentation, or if End User breaches any of the

provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS

PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND,

EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT,

AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Data-

logic Product furnished hereunder infringe a United States patent or copyright

of a third party and Datalogic will pay any damages finally awarded against

End User by a court of competent jurisdiction that are attributable to such

claim or will pay End User's part of any settlement that is attributable to such

Quick Reference Guide v

claim, provided, that 1) End User notifies Datalogic promptly in writing of the

claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End

User cooperates fully with Datalogic in such defense or settlement. All notices

of a claim should be sent to Datalogic ADC, Inc., Legal Department, 959 Terry

Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1)

procure for End User the right to continue using the Datalogic Product, 2)

modify the Datalogic Product so that it becomes non-infringing, 3) replace the

Datalogic Product with an equivalent product not subject to such claim, or 4)

provide End User an opportunity to return the Datalogic Product and receive a

refund of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based

upon 1) the use of any Datalogic Product in combination with any product

which Datalogic has not either furnished or authorized for use with such Dat-

alogic Product 2) the use of any Datalogic Product designed, manufactured, or

modified to the specifications of End User, or 3) End User's modification of the

Datalogic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION

CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL

PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE-

MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING

SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-

TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE

PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY

CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATA-

LOGIC'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT,

TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WAR-

RANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR

THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE

LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA,

INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSE-

QUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR

OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POS-

SIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is sub-

ject to the restrictions for computer software developed at private expense as

set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or

52.227-19 or in the Rights in Technical Data and Computer Software clause at

DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End

User must comply with the applicable local laws of the country in which the

Datalogic Product is used, with U.S. export control laws, and with the English

language version of this Agreement. The provisions of the "United Nations

Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1Either party may terminate this Agreement or any license granted under this

Agreement at any time upon written notice if the other party breaches any

provision of this Agreement.

10.2Upon termination of this Agreement, End User immediately shall cease using

any nonembedded software and shall return to Datalogic or destroy all non-

embedded software covered by this Agreement, and shall furnish Datalogic

with a certificate of compliance with this provision signed by an officer or

authorized representative of End User. For embedded software, End User

agrees to sign a waiver prepared by Datalogic concerning further use of the

embedded Software. End User's resumed or continued use of the embedded

Software after termination shall constitute End User's agreement to be bound

by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agree-

ment between the parties relating to the licensing of the Software and super-

sedes all prior or contemporaneous agreements, written or oral, between the

parties concerning the licensing of the Software. This Agreement may not be

changed, amended, or modified except by written document signed by Data-

logic.

Software Product Policy

vi QuickScan™ QBT24XX

11.2 Notice. All notices required or authorized under this Agreement shall be given

in writing, and shall be effective when received, with evidence of receipt.

Notices to Datalogic shall be sent to the attention of Contract Administration,

Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other address

as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this

Agreement shall not prevent the party's later enforcement of such terms and

conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereun-

der shall be governed by and construed in accordance with the laws of the

State of Oregon U.S.A, without regard to the rules governing conflicts of law.

The state or federal courts of the State of Oregon located in either Multnomah

or Lane counties shall have exclusive jurisdiction over all matters regarding

this Agreement, except that Datalogic shall have the right, at its absolute dis-

cretion, to initiate proceedings in the courts of any other state, country, or ter-

ritory in which End User resides, or in which any of End User's assets are

located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and

conditions of this Agreement, the prevailing party shall be entitled to reason-

able attorneys' fees, both at trial and on appeal.

- END -

Software Product Policy

Datalogic reserves the right to ship its products with the latest

version of software/firmware available. This provides our cus-

tomers with the very latest in Datalogic software technology.

The only exception to this policy is when the buyer has a signed

contract with Datalogic that clearly defines the terms and condi-

tions for making software/firmware changes in products shipped

to the buyer.

Customers Under Software Support

Customers that elect to subscribe to Datalogic Software Mainte-

nance and Support Agreement will receive 30 days advance notifi-

cation of: (1) the release of a new software version; and/or (2)

discontinuation of any prior software version that will no longer

be supported. Datalogic will provide maintenance for a fee that

will assist customers in transitioning to the next software ver-

sion. If a customer is currently using the software version being

discontinued, the customer may elect to transition to any one of

the newer versions, depending on the hardware in use.

To arrange for a Software Maintenance and Support Agreement

please contact your Datalogic sales person.

Quick Reference Guide 1

QuickScan™ QBT24XX

Description

With rich feature sets and extensive options, the QuickScan™

product series from Datalogic represents the premium level of

data collection equipment for general purpose applications.

The QuickScan QBT24XX readers have enhanced optics with

improved motion tolerance allowing codes placed on fast

moving objects to be easily and quickly captured, creating the

ideal reader for tasks requiring high throughput like those

found in retail and light industrial environments.

Omni-

Directional

Operation

To read a symbol simply aim the reader and pull

the trigger. The QuickScan QBT24XX is a powerful

omni-directional reader, so the orientation of the

symbol is not important.

Datalogic’s exclusive patented ‘Green Spot’ for

good-read feedback helps to improve productivity

in noisy environments or in situations where

silence is required. When using the product with

the cradle at a 45° position, the Green Spot can

work as an aiming system to aid in positioning the

bar code for quick and intuitive reading.

Decoding

Reliably decodes all standard 1D (linear) and 2D

bar codes, including GS1 DataBar™ linear codes,

Postal Codes (China Post), Stacked Codes (such as

GS1 DataBar Expanded Stacked, GS1 DataBar

Stacked, GS1 DataBar, Stacked Omnidirectional).

The data stream — acquired from decoding a

symbol — is rapidly sent to the host. The reader is

immediately available to read another symbol.

Imaging

The QuickScan QBT24XX can also function as a

camera by capturing entire images or image por-

tions of labels, signatures, and other items.

Setting Up the Reader

2 QuickScan™ QBT24XX

Setting Up the Reader

Follow the steps below to connect and get your reader up, and

communicating with its host.

1. Configure the Base Station starting on this page.

2. Charge the Batteries (see page 8).

3. Link to the Base Station (see page 14).

4. Select the Interface Type (see page 23).

5. Configure the Reader starting on page 29 (optional,

depends on settings needed).

Locking the Reader to the Base

The Base Station provides a locking mechanism to ensure

electrical contact between Reader and Base, in case of inad-

vertent movements.

To Lock the Reader in the Base

1. Insert the Reader into the Base. The lock lever rests

in its natural disengaged position toward the bot-

tom of the Base.

Lock

Lever

Setting Up the Reader

Quick Reference Guide 3

Figure 1. Lock lever disengaged

2. Engage the locking mechanism by pushing up the lever

as far as it will go.

Figure 2. Lever in locked position

it is good practice to put the scanner in the locked

condition at the end of the working shift, or when

not in use for an extended period of time. This will

ensure that the scanner is fully seated for com-

plete battery recharge.

Connecting the Base Station

4 QuickScan™ QBT24XX

Connecting the Base Station

Figure 3 on page 5 shows how to connect the Base Station to

a terminal, PC or other host device. Turn off the host before

connection and consult the manual for that equipment (if

necessary) before proceeding. Connect the interface cable

before applying power to the Base Station.

Base Station Connection and Routing

1. Remove the rubber Cable Stopper from the bottom of

the Base Station.

2. Securely plug the Power Cable and Interface (I/F) Cable

connectors into their respective ports in the underside

of the Base Station.

The QBT24XX can also be Powered by the Ter-

minal. When powered by the Terminal, the bat-

tery charger is automatically set as Slow

charge.

For some specific interfaces or hosts or lengths

of cable, the use of an external power supply

may be recommended for full recharging capa-

bility (see

"Technical Specifications" on

page 35

for more details).

Cable Stopper

Power Cable

I/F Cable

Connecting the Base Station

Quick Reference Guide 5

3. After the cables are plugged in, reinsert the Cable Stop-

per.

4. Connect to an AC Adapter, and plug the AC power cord

into the (wall) outlet.

Figure 3. Connecting the Base Station

Host Connection —

Verify before connection that the reader’s

cable type is compatible with your host equipment.

The QuickScan QBT24XX can be set up to

require a PIN code when connecting to the host.

If you are adding new equipment to a system

that uses a custom security PIN, please see the

PRG for information before proceeding.

Cable Stopper

reinserted

Base

Station

I/F Cable

AC/DC

Adapter

DC Power

Cord

Wall plug

Connector

Connecting the Base Station

6 QuickScan™ QBT24XX

Most connections plug directly into the host device as shown

in Figure 4. Keyboard Wedge interface cables have a ‘Y’ con-

nection where its female end mates with the male end of the

cable from the keyboard and the remaining e.nd at the key-

board port on the terminal/PC.

Figure 4. Connecting to the Host

Power Connection —

Plug the AC Adapter into an approved AC

wall socket with the cable facing downwards (as shown in

Figure 3) to prevent undue strain on the socket.

System and Network Layout

Typical Setup with Cradle and Host

Figure 5. Reader Layout

U

S

B

I

B

M

K

e

y

b

o

a

r

d

W

e

d

g

e

W

a

n

d

or...

Reader

Base Station

Host

Connecting the Base Station

Quick Reference Guide 7

Using the BC20xx™ Radio Base

Radio Base LEDs

LEDs on the QuickScan Base provide information about the

Base as well as battery charging status, as shown in Figure 6.

Figure 6. QuickScan Base LEDs

Table 1. Radio Base LEDs

LED STATUS

Power on /

Data

Yellow On = Base is powered

Yellow Blinking = Base receives data

and commands from the Host or the

Reader.

Charging Red On = the Battery is charging.

Charge com-

pleted

Green On = the Battery is completely

charged.

Charging +

Charge com-

pleted

Red and Green Blinking together =

the Reader is not correctly placed

onto the Base.

YELLOW LED

RED LED /

GREEN LED

Connecting the Base Station

8 QuickScan™ QBT24XX

Charging the Batteries

The battery can be charged by connecting the reader directly

to a host through the micro-USB connector available in the

bottom of the handle, as shown.

Alternatively, simply insert the QuickScan into the base. When

the scanner is fully seated in the cradle, it will sound a “chirp”

to indicate that the cradle has detected the scanner connec-

tion.

The LEDs on the base (shown in Table 1 on page 7) will indi-

cate the status of the battery.

Battery Safety

To install, charge and/or perform any other action on the bat-

tery, follow the instructions in this manual.

Before using the Battery, read “Battery Safety” in

the following section. Datalogic recommends

annual replacement of rechargeable battery

packs to ensure maximum performance.

WARNING

Do not discharge the battery using any device

except for the scanner. When the battery is

used in devices other than the designated

product, it may damage the battery or reduce

its life expectancy. If the device causes an

abnormal current to flow, it may cause the

battery to become hot, explode or ignite and

cause serious injury.

Lithium-ion battery packs may get hot,

explode or ignite and cause serious injury if

exposed to abusive conditions. Be sure to fol-

low the safety warnings listed on the follow-

ing page.

Micro-USB

Connector

Connecting the Base Station

Quick Reference Guide 9

WARNING

• Do not place the battery pack in fire or heat.

• Do not connect the positive terminal and

negative terminal of the battery pack to each

other with any metal object (such as wire).

• Do not carry or store the battery pack

together with metal objects.

• Do not pierce the battery pack with nails,

strike it with a hammer, step on it or other-

wise subject it to strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose the battery pack to liquids, or

allow the battery to get wet.

• Do not apply voltages to the battery pack

contacts.

WARNING

In the event the battery pack leaks and the

fluid gets into your eye, do not rub the eye.

Rinse well with water and immediately seek

medical care. If left untreated, the battery fluid

could cause damage to the eye.

CAUTION

Always charge the battery at 32° – 104°F (0° -

40°C) temperature range.

CAUTION

Use only the authorized power supplies, bat-

tery pack, chargers, and docks supplied by

your Datalogic reseller. The use of any other

power supplies can damage the device and

void your warranty.

Do not disassemble or modify the battery. The

battery contains safety and protection devices,

which, if damaged, may cause the battery to

generate heat, explode or ignite.

Connecting the Base Station

10 QuickScan™ QBT24XX

As with other battery types, Lithium-Ion (LI) batteries will lose

capacity over time. Capacity deterioration is noticeable after

one year of service whether the battery is in use or not. It is

difficult to precisely predict the finite life of a LI battery, but

cell manufacturers rate them at 500 charge cycles. In other

words, the batteries should be expected to take 500 full dis-

charge/charge cycles before needing replacement. This num-

ber is higher if partial discharging/recharging is adhered to

rather than full/deep discharging.

CAUTION

Do not place the battery in or near fire, on

stoves or other high temperature locations.

Do not place the battery in direct sunlight, or

use or store the battery inside cars in hot

weather. Doing so may cause the battery to

generate heat, explode or ignite. Using the

battery in this manner may also result in a

loss of performance and a shortened life

expectancy.

CAUTION

Do not place the battery in microwave ovens,

high-pressure containers or on induction

cookware.

Immediately discontinue use of the battery if,

while using, charging or storing the battery,

the battery emits an unusual smell, feels hot,

changes color or shape, or appears abnormal

in any other way.

Do not replace the battery pack when the

device is turned on.

Do not remove or damage the battery pack’s

label.

Do not use the battery pack if it is damaged in

any part.

Battery pack usage by children should be

supervised.

CAUTION

Storage of batteries for a long time at fully

charged status or at fully discharged status

should be avoided.

Connecting the Base Station

Quick Reference Guide 11

The useful life of LI batteries depends on usage and number

of charges, etc., after which they should be removed from ser-

vice, especially in mission critical applications. Do not con-

tinue to use a battery showing excessive loss of capacity, it

should be properly recycled / disposed of and replaced.

Collect and recycle waste batteries separately from the device

to comply with European Directive 2006/66/EC, 2011/65/EU,

2002/96/EC, 2012/19/EU and subsequent modifications, US

and China regulatory and other laws and regulations about

the environment.

Replacing the Battery Pack

1. Using a coin or screwdriver, unscrew the bottom of the

battery pack until it is disengaged.

The battery pack will rise slightly in the rear, pushed by

the contact springs.

CAUTION

Only in case of long storage, to avoid deep dis-

charge of the battery it is recommended to par-

tially recharge the battery every three months to

keep the charge status at a medium level.

As a reference, run a fast recharge for 20 minutes

every three months on unused products to avoid

any performance deterioration of the cell.

Before proceeding, read “Battery Safety” on

the preceding pages. Datalogic recommends

annual replacement of rechargeable battery

packs to ensure maximum performance.

Connecting the Base Station

12 QuickScan™ QBT24XX

2. Extract the battery pack by slightly rotating the pack

and pulling away from the reader.

To mount the new battery pack reverse the process:

1. Insert the top of the new pack inside the reader’s han-

dle.

2. Rotate the battery pack downward while pressing the

bottom side of the battery pack (to seat securely into

the contacts springs) so that the edges of the pack and

the handle board are aligned, while replacing the screw

in the bottom of the handle.

Page is loading ...

Datalogic QuickScan QBT24XX Quick Reference Manual

Datalogic QuickScan QBT24XX Quick Reference Manual

Related papers

Other documents