GE JGP933BECBB Specification

GE
Brand
GE
Model
JGP933BECBB
Category
Cookers
Type
Specification

GE JGP933BECBB is a 30” Built-In Gas Cooktop with a deep porcelain coated steel design and sealed cooktop burner design. It features a 15,000 BTU Maximum Plus Burner for faster boiling and a Precise Simmer Burner for delicate cooking. The continuous deluxe cast grates are dishwasher safe for easy cleaning. The cooktop also has electronic pilotless ignition for added convenience and safety.

GE JGP933BECBB is a 30” Built-In Gas Cooktop with a deep porcelain coated steel design and sealed cooktop burner design. It features a 15,000 BTU Maximum Plus Burner for faster boiling and a Precise Simmer Burner for delicate cooking. The continuous deluxe cast grates are dishwasher safe for easy cleaning. The cooktop also has electronic pilotless ignition for added convenience and safety.

TM
Specification Revised 3/01
JGP933BEC/CEC/SEC/WEC—GE Profile
™
30” Built-In Gas Cooktop
Dimensions (in inches)
Counter Installation Dimensions (in inches)
3-3/16*
Cooktop
2-1/2"
(min.)
28-1/2
19-5/8
30
21
AGA Requirement: All gas cooktop models required 7/16"
free area below cooktop height to combustible material.
0” Clearance is required between left and right sides of
cooktop below countertop. Requires 18" minimum from
countertop to adjacent overhead cabinets.
Note: If installing with a GE Profile Performance™ or GE
Profile™ Telescopic Downdraft System, consult both cooktop
and downdraft installation instructions packed with product
before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft.
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select GE 27"
Wall Ovens. 30" and 36" Gas cooktops are approved for use
over 30" Wall Ovens. Refer to cooktop and wall oven installa-
tion instructions packed with product for current dimensional
data.
Installation Information: Before installing, consult
installation instructions, packed with product, for current
dimensional data.
Electrical junction
box 12" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure at
front
3-3/4" MIN.
clearance to
side wall
from cut-out
6" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
2-1/4" to
rear wall
13" MAX.
depth
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
WWW.GEAppliance.com or call
GE Answer Center
®
service, 800.626.2000.
TM
Specification Revised 3/01
JGP933BEC/CEC/SEC/WEC—GE Profile
™
30” Built-In Gas Cooktop
L
O
H
I
9
8
7
6
5
4
3
2
1
OFF
OFF
L
O
H
I
9
8
7
6
5
4
3
2
1
OFF
OFF
L
O
H
I
9
8
7
6
5
4
3
2
1
O
FF
OFF
L
O
H
I
9
8
7
6
5
4
3
2
1
OFF
OFF
Features and Benefits
• Deep Porcelain Coated Steel Design
• Sealed Cooktop Burner Design
• 15,000 BTU Maximum Plus Burner
• Precise Simmer Burner
• Dishwasher Safe Continuous Deluxe Cast Grates
• Electronic Pilotless Ignition
• Model JGP933WECWW–White on white
• Model JGP933BECBB–Black on black
• Model JGP933CECCC–Bisque on bisque
• Model JGP933SECSS–Stainless Steel
  • Page 1 1
  • Page 2 2

GE JGP933BECBB Specification

GE
Brand
GE
Model
JGP933BECBB
Category
Cookers
Type
Specification

GE JGP933BECBB is a 30” Built-In Gas Cooktop with a deep porcelain coated steel design and sealed cooktop burner design. It features a 15,000 BTU Maximum Plus Burner for faster boiling and a Precise Simmer Burner for delicate cooking. The continuous deluxe cast grates are dishwasher safe for easy cleaning. The cooktop also has electronic pilotless ignition for added convenience and safety.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents