Barco E2-Tri-Combo Owner's manual

Type
Owner's manual

Barco E2-Tri-Combo is a high-performance video processor that combines three video sources into a single output, making it ideal for applications such as video conferencing, presentation switching, and digital signage. It features a variety of input and output options, including HDMI, DVI, and VGA, and supports resolutions up to 4K. The E2-Tri-Combo also includes a built-in scaler that allows you to convert video signals from one resolution to another, and a frame synchronizer that ensures smooth transitions between video sources.

Barco E2-Tri-Combo is a high-performance video processor that combines three video sources into a single output, making it ideal for applications such as video conferencing, presentation switching, and digital signage. It features a variety of input and output options, including HDMI, DVI, and VGA, and supports resolutions up to 4K. The E2-Tri-Combo also includes a built-in scaler that allows you to convert video signals from one resolution to another, and a frame synchronizer that ensures smooth transitions between video sources.

Info-T 1426: 1 / 2
Barco Inc, Image Processing | 3078 Prospect Park Drive, Rancho Cordova, CA , 95670, USA
Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com
Software Versions for Event Master and ImagePRO
4K Processors and Controllers
General
Phenomenon
The most recent revisions of the Event Master Toolset (EMT) GUI, Video Processor firmware, and operating
system for the Event Master (E2, S34K, and EX), and ImagePRO4K products offer bug fixes, many features,
and improved functionality that are not available in previous revisions. Using the latest software helps ensure
that you do not run into bugs that have already been fixed, allows you to take advantage of the latest
improvements, and ensures interoperability with all Event Master cards, both Generation 1 and Generation 2. It
will also allow you to run the same code in all Event Master products.
Solution
Verify that the Event Master or ImagePRO4K device is loaded with the latest software version available on the
Barco web site (https://www.barco.com/en/products/image-processing).
Scope
This solution applies to all Event Master and ImagePRO4K processors and controllers.
Software Versions
Use the latest firmware and operating system versions available on the Barco web site (
https://www.barco.com/en/products/image-processing).
EMT GUI Software
For E2, S3, EX, and ImagePRO4K processor control, use EMT software version 6.3 Build 49778 or higher.
Video Processor Firmware
For E2, S3, EX, and ImagePRO4K processors, use firmware revision 06.3.2477 or higher.
Operating System
The table below lists the latest software versions of the EMT GUI software, Video Processor firmware, and
operating-system revisions for Event Master and ImagePRO4K devices.
A. Must modification, Barco will provide the necessary
components to perform this modification at no charge.
B. Improves the reliability of the product.
C. Improves the general working conditions of the product.
D. For information only.
Serial Number : 1426
Date : 2019-05-20
Product : Event Master and ImagePRO4K Products
Priority Code* : C
Barco service bulletin
Info-T 1426: 2 / 2
Barco Inc, Image Processing | 3078 Prospect Park Drive, Rancho Cordova, CA , 95670, USA
Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com
Product E2 S34K EX
Image-
PRO4K
EC-200 EC-210
Operating System 0.4.8 0.4.8 2.0.4 2.0.3 1.2.17 2.0.7
Firmware Version 6.3.2477 6.3.2477 6.3.2477 6.3.2477 N/A N/A
EMT GUI Software
Version
6.3.49778 6.3.49778 6.3.49778 6.3.49778 6.3.49778 6.3.49778
Software Downloads
You can download the required software from the Barco product web sites.
Link for E2 software
https://www.barco.com/en/support/e2/drivers
Link for S34K
https://www.barco.com/en/support/s3-4k/drivers
Link for EX
https://www.barco.com/en/support/ex/drivers
Link for ImagePRO4K
https://www.barco.com/en/support/imagepro-4k/drivers
Link for EC-200
https://www.barco.com/en/support/ec-200/drivers
Link for EC-210
https://www.barco.com/en/support/ec-210/drivers
Software Installation
General
Upgrade the firmware first, before upgrading the operating system.
Detailed Instructions
For detailed instructions on downloading and installing Event Master and ImagePRO 4K firmware and
operating-system software, refer to the firmware upgrade and software installation sections of the Event Master
Devices User's Guide (R5905948) and the ImagePRO4K Video Processor User's Guide (R5906167).
  • Page 1 1
  • Page 2 2

Barco E2-Tri-Combo Owner's manual

Type
Owner's manual

Barco E2-Tri-Combo is a high-performance video processor that combines three video sources into a single output, making it ideal for applications such as video conferencing, presentation switching, and digital signage. It features a variety of input and output options, including HDMI, DVI, and VGA, and supports resolutions up to 4K. The E2-Tri-Combo also includes a built-in scaler that allows you to convert video signals from one resolution to another, and a frame synchronizer that ensures smooth transitions between video sources.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI