Rosewill RNX-AC1900PCE Dual Band PCI-Express Wi-Fi Adapter User manual

Type
User manual

This manual is also suitable for

The Rosewill RNX-AC1900PCE Dual Band PCI-Express Wi-Fi Adapter is a high-performance wireless network adapter that allows you to connect your desktop computer to a wireless network. It supports both 2.4GHz and 5GHz bands, and it can achieve speeds of up to 1900Mbps. The adapter also features beamforming technology, which helps to improve the signal strength and range.

The Rosewill RNX-AC1900PCE Dual Band PCI-Express Wi-Fi Adapter is a high-performance wireless network adapter that allows you to connect your desktop computer to a wireless network. It supports both 2.4GHz and 5GHz bands, and it can achieve speeds of up to 1900Mbps. The adapter also features beamforming technology, which helps to improve the signal strength and range.

RNX-AC1300PCE/RNX-AC1900PCE
Troubleshooting Instruction
How to Fix Network Connection Issues in Windows 10
Windows 10 updates have affected the compatibility of some Wi-Fi Adapters, including the Rosewill
RNX-AC1300PCE/RNX-AC1900PCE PCI-Express Wi-Fi Adapters. Our development team is
diligently working to address driver compatibility. In the meantime, if you’re having problems getting
connected to a wireless network and can’t get onto the internet, we’ve compiled some troubleshoot
options you can try.
1. Microsoft Windows Support
First, check these 8 ways to fix network connection issues from Microsoft Windows support and follow
the instructions.
v Things to try first
v Run the Network troubleshooter followed by networking commands
v Roll back the network adapter driver
v Update the network adapter driver
v Temporarily turn off firewalls
v Temporarily turn off any antivirus or malware-prevention software
v Uninstall the network adapter driver and restart
v Use network reset to reinstall network devices
2. Re-Install VPN Software
After upgrading to Win 10, older VPN software might be the root cause of Wi-Fi connection failure as
Microsoft states:
"This issue may occur if unsupported VPN software is installed in Windows 8.1 and is
present during the upgrade to Windows 10. Older software versions contain a filter driver (the
Deterministic Network Enhancer) that is not upgraded correctly."
To fix this issue, download the wireless network Troubleshooter from Microsoft Windows support
and follow the instructions provided. Before you make any changes, please back up the registry for
restoration in case problems occur.
3. Try to Lock PCI from System Configuration
Follow the steps below to get RNX-AC1300/RNX-AC1900PCE properly recognized:
1. Press the Windows and R key to bring up the Run prompt
2. Type msconfig into the Run prompt and click OK
3. In the System Configuration window, click on the Boot tab
4. Under the Boot tab, click Advanced options
5. Tick the checkbox for PCI Lock and click OK
6. Click OK on the Boot tab of the System Configuration window and restart the computer once
prompted.
Technical Support Information
[email protected] 1-800-575-9885
----------------------------------------------------------------------------------
Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.com
for complete warranty information and support for your product.
RNX-AC1300PCE/RNX-AC1900PCE_A
  • Page 1 1

Rosewill RNX-AC1900PCE Dual Band PCI-Express Wi-Fi Adapter User manual

Type
User manual
This manual is also suitable for

The Rosewill RNX-AC1900PCE Dual Band PCI-Express Wi-Fi Adapter is a high-performance wireless network adapter that allows you to connect your desktop computer to a wireless network. It supports both 2.4GHz and 5GHz bands, and it can achieve speeds of up to 1900Mbps. The adapter also features beamforming technology, which helps to improve the signal strength and range.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI