Titan Fitness Hyper / Back Extension Bench v2, Hyper / Roman Chair V2 User manual

  • Hello! I am an AI chatbot trained to assist you with the Titan Fitness Hyper / Back Extension Bench v2 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
O W N E R S M A N U A L
MPN(s):
SKU(s):
UPC(s):
2
P A R T S D I A G R A M / E X P L O D E D V I E W
3
KEY
BOX
DESCRIPTION
QTY
(1) 1 Rear Support frame 1
(2) 1 Rear base frame 1
(3) 1 Front base frame 1
(4) 1 Pad support frame 1
(5) 1 Left Handle 1
(6) 1 Right Handle 1
(7) 1 Foam bracket 1
(8) 1 Front Support frame 1
(9) 1 Foam tube 1
(10) 1 Foot plate 2
(11) 1 Pin Φ9.8*95 1
(12) 1 Pad 1
(13) 1 Foam Ф85*Ф22*165 2
(14) 1 rubber cushion 50*25*0.8 1
(15) 1 End cap 4
(16) 1 50X120 plate 1
(17) 1 handle cover Ф31*3*120 2
(18) 1 knob 1
(19) 1 Lock pin M10 1
(20) 1 60X2-F50 sleeve 1
(21) 1 PlugΦ25*2 2
(22) 1 PlugΦ32*1.5 2
(23) 1 F50*2 Plug 2
(24) 1 F60*2Plug 1
(25) 1 Bolt M10*85 1
(26) 1 Bolt M10*80 2
(27) 1 Bolt M10*70 2
(28) 1 Bolt M10*20 6
(29) 1 Bolt M8*20 4
(30) 1 Bolt M6*15 4
(31) 1 Washer Φ11*Φ20*2 16
(32) 1 Washer Φ9*Φ16*1.6 4
(33) 1 Nut M10 5
4
A S S E M B L Y I N S T R U C T I O N S
Step 1
Connect Rear Support Frame (1), Rear Base Frame (2) and Front Base Frame (3), using
Pin (11), Flat Washer (31) and Hex Bolt M10*20 (28).
5
A S S E M B L Y I N S T R U C T I O N S
Step 2
Fix Pad (12) on Pad Support Frame (4), using Flat Washer (32) and Bolt M8*20(29), then
insert the Pad Support Frame (4) into the Rear Support Frame (1).
6
A S S E M B L Y I N S T R U C T I O N S
Step 3
Fix Left Handle (5) and Right Handle (6) on Pad Support Frame (4), using Flat Washer
(31), Nut M10(33), and Bolt M10*70(27).
7
A S S E M B L Y I N S T R U C T I O N S
Step 4
Fix Foam Bracket (7) on Rear Support Frame (1), using Plate (16), Flat Washer (31), Nut
M10(33), and Bolt M10*80(26).
Insert Foam Tube (9) into the Foam Bracket (7), then install the FOAM (13) on the FOAM
Tube (9).
8
A S S E M B L Y I N S T R U C T I O N S
This concludes the _____ Owner’s Manual.
If applicable to your product, make sure to tighten all
nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com/www.titan.fitness
Business Hours: MondayFriday • 8:00 a.m.5:00 p.m. (CT)
/