1
Installation Instructions for
Feed the fixture wires through the stem and screw the stem onto the fixture.
Feed the fixture wires through the hub and fixture loop, then screw the hub onto the stem.
Install the chains to hub and fixture by securing the hooks to the hub and fixture.
Install the candle tubes by sliding them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the tethered chains by hooking them to the bottom of the fixture, then place the cups onto the threads under the
sockets and secure them in place by screwing each finial onto the corresponding threads.
1
2
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3
4
Beverly Chandelier
1.0
F3132-6-F3331-4-F3332-8
Chandelier
F3132/6, F3331/4, F3332/8
5
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
1A
6
7
8
LAMP
CANDLE TUBE
SOCKET
STEM
CANDLE FOLLOWER
CUP
4
8
7
1
HUB
HOOK
CHAIN
TETHERED CHAINS
FINIAL
THREAD
2
5
6
3
FIXTURE LOOP