NexTrend 3216560508 is a PoE IP camera that can be powered by a PoE NVR, PoE switch, or an adapter. It supports ONVIF and 1080P video, enabling remote viewing on smartphones and computers. The camera has motion detection capabilities and supports cloud storage for video footage. It can be easily installed and configured using the IPC Tool software or the Danale app. The camera also features night vision, allowing for clear images even in low-light conditions.
NexTrend 3216560508 is a PoE IP camera that can be powered by a PoE NVR, PoE switch, or an adapter. It supports ONVIF and 1080P video, enabling remote viewing on smartphones and computers. The camera has motion detection capabilities and supports cloud storage for video footage. It can be easily installed and configured using the IPC Tool software or the Danale app. The camera also features night vision, allowing for clear images even in low-light conditions.
POE IP CAMERA
V201818-01
USER MANUAL
01
Thank you for purchasing. This is a Power Over Ethernet (POE) camera. It could be
powered by POE NVR(not included) or POE Switch (not included). The Advanced POE
Technology enables you to use a Single Network Cable for both Power and Video
Transmission, then making the Wiring Simplified and Installation Easier. We also
provide an extra adapter for power supply if you don't use the POE Function.
This user manual is designed to be a reference tool for the installation of your device.
You can find the toll free number and after-sales email address on the package box.
Please feel free to contact us if you need any assistance.
1.Device Installation 1 --Powered by PoE NVR
If you have a PoE NVR, please refer to Page 02.
2.Device Installation 2 --Powered by PoE Switch
If you have a PoE Switch and a NVR, please refer to Page 02 & Page 03
If you only have a PoE switch, please refer to Page 03.
3.Device Installation 3 --Powered by adaptor
If you have no Switch and no NVR, please refer to Page 10.
NOTE:
① Please ensure PoE Switch or PoE NVR is standard 48V. The NVR should support
ONVIF and 1080P video or above.
② Ensure your network cable is CAT5 or above and the length is less than 100
meters.
③ Please navigate the installation way you are going to use and follow below
instruction.
Part #1: Brief Introduction
Part #2: Device Installation
02
① Connect the IP camera to PoE port of PoE NVR with the network cable. Ensure your
PoE NVR has been connected to a monitor. If you want to have remote view on your
smart phone, please make sure the PoE NVR also has been connected to a router.
② Add the camera on NVR monitor. Please refer to the NVR user manual about the
adding way.
1.Device Installation 1 --Powered by PoE NVR
1.1 If you have a PoE NVR, please install the camera as this way.
2.Device Installation 2 --Powered by PoE Switch
2.1 If you have a PoE Switch and a NVR, please install the camera as this way
03
① Connect the IP camera to PoE Port of PoE Switch with a network cable. Connect
the NVR to PoE Switch with a network cable. Connect the NVR to a monitor with the
VGA cable or HDMI cable. If you want to have remote view on your smart phone,
please make sure your router has been connected to the PoE NVR or UpLink port of
the PoE Switch.
② Add the camera on NVR monitor. Please refer to the NVR user manual about the
adding way.
2.2 If you only have a PoE switch but do not have NVR, please install the
camera as this way.
① Connect the IP camera to PoE Port of PoE Switch with a network cable. Connect the
router to UpLink port of the PoE Switch.
② Download the IPC Tool software to your Windows computer. Please kindly be patient
to input the website below and download it from the dropbox. After open the software,
the PoE camera will be searched automatically and shown in the list.
Windows IPC Tool : https://www.dropbox.com/s/gkssy7cfrr29v90/SearchTool-Setup.ex-
e?dl=0
Note: Please contact our customer service if you want to get the link directly. You can
find the contact information on the package box or on Your Amazon Order page.
③ Please find the IPv4 address and IPv4 gateway of your computer network.
04
④ Please modify the IPv4 address and the IPv4 Gateway based on your computer
network. ie, the IPv4 address of your computer network is 192.168.1.122 and IPv4
Gateway of your computer is 192.168.1.1. Please modify the IP and the Gateway to
192.168.1.xxx (xxx is from 2~255 which has no collision with other IP address).
① Download APP
Download the “Danale” APP on Google Play or APP Store. Register an account with
your email or phone number. Open the “Danale” APP and login your account.
NOTE: Please click 'Allow' when Danale asks to access to your photos, media content
and files on your device.
② Adding a Device
Please make sure your phone and the camera were connected to the same wifi.
To add a device, press add device button “+”
The Configure Network screen will appear, type in the password
Press “Next”, and wait for the application to search for your device
You will see a Devices List screen. Please wait for your device to appear on this
screen. Note: This may take two minutes. If it does not appear, please refresh
the page by swiping down
Press “Add” when your camera appears
Name your device.
Remote view on the phone
05
③ Application Controls (main screen and live video)
Share Device
My Profile
Add Device
Cloud History
Notification
+
Back to Main Screen
Share Device
Device Settings
Device Audio
Tithle View
Device Messages
Cloud History
Full Screen
Capture
Microphone
Record
Live Video
Main Screen
06
④ Purchase Cloud Service
Note: If you want to record video and playback the historical video, please purchase
the cloud service. Each camera needs subscribe cloud service separately.
But if you use the Danale App in first time, then you will have 30 days free Cloud
service. In this case, the Cloud storage will only include the motion detection.
Navigate the device you want to subscribe cloud service on main screen, then click
Video Playback.
You will be prompted to subscribe the cloud service.
⑤ View Cloud Video
From the Main Screen, navigate to the desired Device Screen.
From the Device Screen, click on the cloud history icon,
From the Cloud History Screen, one user can view up to 7 days of video footage.
⑥ Security Settings
To access your motion detection controls, click on “Security settings” from
the Device Settings screen.
Motion detection sensitivity can be adjusted or detection can be completely
shut off from this screen.
⑦ Share Device
Your friends need to download the Danale APP on their phone and create a new
account.
Click on “” in the upper left corner of your friends’ main screen to bring up the
system setting menu. Click the account head and find the account QR code.
Navigate your device you want to share on main screen, then click Share Device
button on Main Screen.
Scan your friends’ account QR code or manually input the account name and
configure the permission you want to share.
To delete the shared device, please navigate the shared device under system
setting. Long press any user that you previously shared with.
07
② Input the Username : admin, keep the Password blank, and then click Login.
You will go to the page like below.
① After modify the IP and Gateway, please open your Internet Explorer and type in
the IP address you modified for your camera. You will go to the page below. Please
switch the language to English.
Local View on the Computer
08
② Please install the software on the computer. Open it and Login your Danale
account. The devices added on the phone will be synchronized.
③ In the page above, please download the QCX plug-in. After download the QCX
plug-in file, please close the browser. And then find the file and finish the installation.
Please ensure to close the browser when installing the plug-in!
④ After installed the QCX plug-in, please type in the IP address of the IP camera. You
could check the live video now.
① To download the DanaCMS software, please contact our customer service with
your Amazon order number to get the software link, please noted that you can find
the contact information on the package box or on your Amazon order page.
Remote view on the computer
09
③ Check the live video
Double click the device on the list in the right you want to check.
In the live video window, you could stop the play, take snapshot or save a video to
local file, set device setting, enter full screen. Please note this model doesn’t support
audio and speaker.
10
3.1 If you don’t have Switch and NVR, please install the camera as this way.
① Charge the IP camera with the power adaptor which included in the package.
Connect the camera to the router with a network cable.
② Please refer to the configuration in section 2.2 on Page 03 and Page 04.
④ Playback video
Click the system setting as marked in the picture above and navigate Cloud Video
for Windows system or Reply for Mac system.
3.Device Installation 3 --Powered by adaptor
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
NexTrend 3216560508 is a PoE IP camera that can be powered by a PoE NVR, PoE switch, or an adapter. It supports ONVIF and 1080P video, enabling remote viewing on smartphones and computers. The camera has motion detection capabilities and supports cloud storage for video footage. It can be easily installed and configured using the IPC Tool software or the Danale app. The camera also features night vision, allowing for clear images even in low-light conditions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Salus UG800 Operating instructions
-
JCO Electronic Technology 1080P HD Panoramic Indoor camera User manual
-
APPRO TECHNOLOGY LC-6865 Quick Installation Manual
-
Q-See QT8516-4Z7-1 Installation guide
-
FULUVA 8595774422 User guide
-
Amcrest UltraHD 4MP Outdoor POE Camera 2688x1520p Bullet IP Security Camera, Outdoor IP67 Weatherproof, 3.6mm Lens, 87° Viewing Angle, 98ft Night Vision, 4-Megapixel, IP4M-1026EB-36MM (Black) User manual
-
Amcrest IP4M-1026EB User manual
-
Amcrest IP3M-954EW User manual
-
-
ARES VISION Ares Vision 16CH POE NVR Network Video Recorder 2MP/3MP/4MP/6MP/8MP/4K Playback & Recording. Supports All ONVIF IP Cameras (16 CH POE) User manual
