Gibraltar Building Products VD616G Operating instructions

Gibraltar Building Products
Brand
Gibraltar Building Products
Model
VD616G
Type
Operating instructions
Surface Mount Vents – Used in new construction and to cover openings where original installed vents have
deteriorated. The damper is a simple mechanism to manually control airflow. These vents are ideal for use
where traditional framing members (studs) are 16" on center.
1. Rough opening measurements must be at least 1 inch smaller than the vent size.
2. Remove the old vent and any loose debris from opening.
3. Apply a bead of sealant around inside of vent flange.
4. Fasten vent with nails or screws using the pre-punched fastener holes (6 per vent).
Vent Size: 4 in. x 16 in.
Rough Opening: 3 in. x 15 in.
Net Free Ventilation: 18 sq. in.
Vent Size: 6 in. x 16 in.
Rough Opening: 5 in. x 15 in.
Net Free Ventilation: 24 sq. in.
Vent Size: 8 in. x 16 in.
Rough Opening: 7 in. x 15 in.
Net Free Ventilation: 36 sq. in.
FOUNDATION VENTS
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional,
and to check with your local building inspector or building permit office for approvals and possible variations that may apply.
VD416G VD616G VD816G
  • Page 1 1

Gibraltar Building Products VD616G Operating instructions

Gibraltar Building Products
Brand
Gibraltar Building Products
Model
VD616G
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents