1
ASSEMBLY INSTRUCTIONS
WARNING – Install this lamp on the provided hook, it must be mounted on your building structure that can support at least 20 lbs.
1. Place all parts on a flat smooth surface.
2. Now that the Lamp and all components are laid out in front of you, locate the small crystal parcels that are labeled A
and B. Review the Assembly Diagram provided with this item, and start assembly.
Diagram assembly
1. Install the decorations by letter (A and B) according to images
2. Install the loop C according to image.
3. Install (4) Bulbs (included)
If you choose to operate the lamp with batteries only (no plug-in option), proceed installing one hook in any
desired location (always install the hook on a building structure that can support at least 20 lbs). Connect the
chain to the to the lamp with the provided “Chain C-Lock Loop”
If you choose to operate the lamp with batteries and/or plug-in adapter (See Swag Cord Diagram), install the main hook and
second hook considering the Chain and Adapter cord lengths; see diagram. Be sure your cord will reach the wall outlet!
WARNING - Do not attempt to replace the bulb(s) while the lamp is plugged into a wall
receptacle.
Remote operation and set up
1. Install the battery in the back of the Remote Control, 1 x Type “23A”, not
included.
2. Programing the remote:
a. Either plug the adapter to the battery box, or install the batteries (3 x
C Type batteries, not included) in the chromed battery box on top of
the COLUMN. Each battery will fit in the three separate
compartments, follow polarization diagram indicated in the
compartments.
b. Press and hold the SET BUTTON on the battery box, and at the same time press the ON “ ” button on the
REMOTE CONTROL for 3 seconds.
c. Lights will turn on indicating the REMOTE CONTROL and BATTERY BOX have been paired.
3. Timer operation: Press ON, then the desired timer function (3 Hrs. or 6 Hrs.), the bulbs will blink once confirming the
function set up. The lamp will start a 24 Hrs. cycle:
a. 3 Hrs. ON / 21 Hrs. OFF, or
b. 6 Hrs. ON / 18 Hrs. OFF.
4. Dimmer operation, the Remote Control button “ ” selects between three light brightness options. Press to select
the desired brightness.